GS450AT-L/LS Rock Drilling Machine

Product Advantages
1. The traction and feeding mechanisms use Germany's automatic Rexroth system and are under load sensitivity control: The advanced hydraulic system increases productivity by more than 15%-20% compared to the traditional one, reduces heat by about 50%, and saves more than 15%-20% energy compared to the traditional one.

2. Equipped with Cummins engine, designed for engineering machinery with high efficiency, high power, low fuel consumption, low noise, strong ability in construction

3. Equipped with a high-power Cummins structural motor

4. Reserve booster, retained the increased power (thrust force). The max. traction force can reach up to 900kN to ensure the safety of the structure during large diameter construction.

5. The beam uses a four-link sliding beam structure, which greatly increases the range of entry angles and ensures that large angles and drilling paths are not off the ground, improving safety performance.

6. The reversible manipulator is convenient for loading or unloading the drilling rod, which significantly reduces the labor intensity of workers, improves work efficiency.

7. Equipped with friction pin φ89 x 3000mm, φ114 x 3000mm, φ127 x 3000mm the use area of the average workplace of the machine meeting the requirements of high-efficiency design in a small place

8. The main hydraulic components are from an international first-class manufacturer of hydraulic components, which greatly enhance the reliability and safety of the product.

9. The electrical design is reasonable with low failure rate, which is easy to maintain.

10. Traction and feeding uses a toothed rack and pinion system, which is good for high efficiency, durability, stable operation and maintenance is also convenient.

11. Rubber-coated steel track, can be loaded heavily and walk on all kinds of roads.

12. The GS450AT-LS rock drilling rig with Rod-in-rod technology can work effectively in rock conditions, as well as work effectively in the general condition of the soil.Product Advantages
1. The traction and feeding mechanisms use Germany's automatic Rexroth system and are under load sensitivity control: The advanced hydraulic system increases productivity by more than 15%-20% compared to the traditional one, reduces heat by about 50%, and saves more than 15%-20% energy compared to the traditional one.

2. Equipped with Cummins engine, designed for engineering machinery with high efficiency, high power, low fuel consumption, low noise, strong ability in construction

3. Equipped with a high-power Cummins structural motor

4. Reserve booster, retained the increased power (thrust force). The max. traction force can reach up to 900kN to ensure the safety of the structure during large diameter construction.

5. The beam uses a four-link sliding beam structure, which greatly increases the range of entry angles and ensures that large angles and drilling paths are not off the ground, improving safety performance.

6. The reversible manipulator is convenient for loading or unloading the drilling rod, which significantly reduces the labor intensity of workers, improves work efficiency.

7. Equipped with friction pin φ89 x 3000mm, φ114 x 3000mm, φ127 x 3000mm the use area of the average workplace of the machine meeting the requirements of high-efficiency design in a small place

8. The main hydraulic components are from an international first-class manufacturer of hydraulic components, which greatly enhance the reliability and safety of the product.

9. The electrical design is reasonable with low failure rate, which is easy to maintain.

10. Traction and feeding uses a toothed rack and pinion system, which is good for high efficiency, durability, stable operation and maintenance is also convenient.

11. Rubber-coated steel track, can be loaded heavily and walk on all kinds of roads.

12. The GS450AT-LS rock drilling rig with Rod-in-rod technology can work effectively in rock conditions, as well as work effectively in the general condition of the soil.