Your city — Москва?
Sale of special equipment in Люберцах
Found 41 sales listings
Installing the Drillto ZT-45/90CDF HDD
One of the flagships of the line is the installation of a ZT-45/90CDF HDD with a traction force of up to 90 tons. The main pumps of Danfoss. It is capable of performing HDD objects of almost any complexity, both in the field and in urban conditions. The dimensions of 8930x2250x2520mm and a weight of no more than 17,000 tons make it easy to deliver the installation to sites with dense buildings. Metal tracks with rubber spacers will not damage the canvas when loading and unloading the machine. High power values, namely a torque of up to 22,000 Nm, a rotation speed of up to 160 rpm, allow the use of an 89x4570mm rod with FS1 #1000 thread to perform even complex transitions.
...
Installation body ...
...
Installation body ...
#30586
Horizontal directional drilling rig DRILLTO ZT 42A
Horizontal directional drilling rig DRILLTO ZT 42A. A budget model with a powerful 179KW engine.
With a high torque of 18,500 nm, a sufficient thrust force of 42 tons, as well as a high-performance bentonite pump of 650 l/min,
with proportional control directly from the operator's cabin. For drilling, the HDD installation uses a rod - 3m long, 83mm in diameter. Analogues are similar in characteristics: Goodeng GD 420L, DDW 40/15, DDW 43/20, XCMG XZ420E, FORWARD RX38×160, FORWARD RX45×180, VERMEER C430 NAVIGATOR, VERMEER NAVIGATOR D80X100 SERIES II ...
With a high torque of 18,500 nm, a sufficient thrust force of 42 tons, as well as a high-performance bentonite pump of 650 l/min,
with proportional control directly from the operator's cabin. For drilling, the HDD installation uses a rod - 3m long, 83mm in diameter. Analogues are similar in characteristics: Goodeng GD 420L, DDW 40/15, DDW 43/20, XCMG XZ420E, FORWARD RX38×160, FORWARD RX45×180, VERMEER C430 NAVIGATOR, VERMEER NAVIGATOR D80X100 SERIES II ...
#30588
Installing the Drillto ZT 36/72AT HDD
The Drillto ZT 36/72AT is a unique model using double rods, which has no analogues in the world! The installation allows you to work in soils of any category. For this purpose, a motor drill with a ball chisel is used. The model is widely used because it allows drilling operations in rocky soils, both in the field and in urban conditions. In addition, the model has the ability to drill with a single 89 rod 4.5 meters long, thanks to the elongated carriage. This allows you not to wear out the tool when there is no need to use double rod technology.
Increasing the pulling force to 72 tons allows you to move the column of rods in difficult situations and continue drilling without any problems. The closest analogues are: Ditch Witch JT60, JT100 All Terrain, Vermeer D36x50DR Series 2
Housing and chassis of the HDD installation ...
Increasing the pulling force to 72 tons allows you to move the column of rods in difficult situations and continue drilling without any problems. The closest analogues are: Ditch Witch JT60, JT100 All Terrain, Vermeer D36x50DR Series 2
Housing and chassis of the HDD installation ...
#30589
Installing the Drillto ZT 36/72AT HDD
The Drillto ZT 36/72AT is a unique model using double rods, which has no analogues in the world! The installation allows you to work in soils of any category. For this purpose, a motor drill with a ball chisel is used. The model is widely used because it allows drilling operations in rocky soils, both in the field and in urban conditions. In addition, the model has the ability to drill with a single steel rod, which allows you not to wear out the tool when there is no need to use double rod technology.
Increasing the pulling force to 72 tons allows you to move the column of rods in difficult situations and continue drilling without any problems. The closest analogues are: Ditch Witch JT60, JT100 All Terrain, Vermeer D36x50DR Series 2
Housing and chassis of the HDD installation ...
Increasing the pulling force to 72 tons allows you to move the column of rods in difficult situations and continue drilling without any problems. The closest analogues are: Ditch Witch JT60, JT100 All Terrain, Vermeer D36x50DR Series 2
Housing and chassis of the HDD installation ...
#30590
Installing the Drillto ZT 36/72CDF HDD
The Drillto ZT 36/72CDF installation, increasing the pulling force to 72 tons, allows you to move the boom column in difficult situations and continue drilling without any problems.
Housing and chassis of the HDD installation
ZT 36/72CDF tracks are metal with rubber spacers. This allows the HDD complex to be used in urban conditions with almost any coating, without causing damage to it. The body of the model is additionally noise-insulated, which allows drilling even at a late hour of the day. ...
Housing and chassis of the HDD installation
ZT 36/72CDF tracks are metal with rubber spacers. This allows the HDD complex to be used in urban conditions with almost any coating, without causing damage to it. The body of the model is additionally noise-insulated, which allows drilling even at a late hour of the day. ...
#30591
Installation of HDD ZT-35/55CDF
The Drillto ZT-35/55CDF transition model. A new model of the series with a feed force of 35 tons. Additionally, the machine is equipped with a patented cylinder tightening system up to 55 tons, which makes it possible to move the boom column in a difficult (emergency) situation and continue drilling normally. The installation is equipped with a powerful 160kW power unit. The hydraulics of the installation consists of hydraulic motors and hydraulic pumps from manufacturers such as Danfoss and Poclain, which ensures not only reliability and durability of the hydraulic system, but also high performance. The model is transitional, because it has the ability to work with drilling rods 73.76.83, 89mm, depending on the configuration of the installation. The closest analogues of the installation by class are: Vermeer D60x90, D60x90 S3, D80x100 S2, V400H, Ditch Witch JT100M1, JT60, JT7020 M1, JT8020 M1, DDW 28/09, DDW 36/13, DDW 38/14, XCMG XZ 360E.
HDD installation case
The small size of the complex - 7500x2300x2530mm and weight - 11000kg make it possible to effortlessly use this model in urban environments. The presence of rubber spacers on metal tracks also contributes to this. ...
HDD installation case
The small size of the complex - 7500x2300x2530mm and weight - 11000kg make it possible to effortlessly use this model in urban environments. The presence of rubber spacers on metal tracks also contributes to this. ...
#30592
Installing the Drillto ZT 21/32CDF HDD
The best-selling HDD installation of the Drillto brand. Thanks to the joint work of engineers from ALBRECHT LLC and Drillto, it was possible to create an ideal HDD installation for urban drilling with 3-meter rods. The model has absorbed the latest developments from the HDD world. At the same time, the machine has not only high power indicators, but also has reliability due to the installed DANFOSS and POCLAIN hydraulics. At the moment, this model has no analogues. Nearest neighbors in class: Vermeer D24x40, D24x40a, D24x40 S1, D24x40 S2, D24x40 S3, D36x50, D36x50 S2, D40x55, Ditch Witch JT4020, JT40, DDW 20/08, DDW 22/08, DDW 28/09, XCMG XZ200, XZ230E, FORWARD RX25x90
Dimensions and dimensions ...
Dimensions and dimensions ...
#30593
Installing the Drillto ZT 21/32CDF HDD
The best-selling HDD installation of the Drillto brand. Thanks to the joint work of engineers from ALBRECHT LLC and Drillto, it was possible to create an ideal HDD installation for urban drilling with 3-meter rods. The model has absorbed the latest developments from the HDD world. At the same time, the machine has not only high power indicators, but also has reliability due to the installed DANFOSS and POCLAIN hydraulics. At the moment, this model has no analogues. Nearest neighbors in class: Vermeer D24x40, D24x40a, D24x40 S1, D24x40 S2, D24x40 S3, D36x50, D36x50 S2, D40x55, Ditch Witch JT4020, JT40, DDW 20/08, DDW 22/08, DDW 28/09, XCMG XZ200, XZ230E, FORWARD RX25x90
Dimensions and dimensions ...
Dimensions and dimensions ...
#30594
Installation of HDD Drillto ZT 20/32AT
A unique HDD installation for rock drilling built on the basis of the 21/32CDF installation. The powerful 133kW Cummins engine, 6000Nm torque on the outer and 2000Nm on the inner rod allow drilling in hard, rocky and frozen rocks. At the same time, the rotation speed is 300 rpm. A powerful bentonite pump with proportional control of 360 l/min with a sharp bentonite feed function perfectly washes and removes drilled soil from the well. And the small dimensions of 6600x2250x2380mm and a weight of 12,000 kg make it possible to move the installation even on a tow truck.
Dimensions and dimensions ...
Dimensions and dimensions ...
#30595
Deep-pit HDD installation DRILLTO ZT-20KD-AT
A deep-pit HDD installation with double rods. Brand ZT-20KD-AT the DRILL TO factory (China), with a pulling force of 20t.
Installation body ...
Installation body ...
#30596
Drillto ZT-15DF Drilling complex
The ZT-15DF drilling complex, with relatively small dimensions (6800x2250x2500mm), has high torque values of 5,500 Nm, as well as good rotational speeds of 0-120 rpm. A 100kW Cummins engine is used to provide the necessary power, which is enough to spare. Bentonite pump 0-240l/min. The closest analogues are: Vermeer D24x40, D24x40a, D24x40 Series 2, D24x40 S3, Ditch Witch JT3020, JT3020m1, JT4020, JT4020m1, DDW 10/04, 13/05, 18/06, Forward rx14x50, XCMG XZ120E, XZ180.
Dimensions of the drilling complex ...
Dimensions of the drilling complex ...
#30597
Installing the Drillto ZT-12CDF HDD
Installing the Drillto ZT-12CDF HDD. A simple and reliable rack-and-pinion model, it is equipped with a cabin with a heater and air conditioning for operation in all weather conditions, which similar machines of this class cannot boast of. The 93KW Cummins engine combined with high-quality hydraulics allows you to develop a torque of up to 4500Nm, while the rotation speed can reach 200 rpm. A powerful bentonite pump with ceramic cylinders with a capacity of 240 liters/min and a shut-off valve ensures the supply of drilling mud. An anchor system, a cassette for 32 drilling rods with automatic feeding and lubrication of drilling rods - everything for fast and comfortable work of the crew. There is also an electric oil heater if you need to warm up the system during the cold season. For operation, the complex uses drilling rods 50x3000mm, the thread D16 FS-1 is the same as on the VERMEER D16X20, 16x20 SII, D18X20, DDW 10/04 installations. A similar drilling rod is used on the Forward RX14x50, DDW 13/05, but 2 meters long.
Dimensions of the complex ...
Dimensions of the complex ...
#30598
Installing the Drillto ZT-06 HDD
The Drillto ZT-06 HDD is an excellent analogue to such models of drilling machines as the Vermer D7x11, D7x11a, D7x11Series 2, D8x12S3 Navigator, Ditch Witch JT520, JT9, DDW 06/03. At the same time, the technical characteristics of this model are above those listed. Its small size makes it easy to use it in urban environments and conditions with insufficient space for work. At the same time, the drilling angles are 7-15 degrees. The Japanese YANMAR engine with a power of 56.5kW allows you to develop a rod torque of 1,650 Nm, which in turn is a value close to the permissible torque limit for a rod of this diameter. Despite the fact that the rotation speed can reach 185 rpm. You must agree - good performance compared to classmates! The performance of the bentonite pump (80l/min) is also higher than that of competitors. In simple words, the Chinese were able to squeeze the most out of the mini HDD installation.
Overall advantages ...
Overall advantages ...
#30600
Installation of HDD brand DRILL ZT-80/120B
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. This power unit is sufficient to develop a torque of 66,000 Nm, and the speed of rotation of the drive shaft can reach up to 90 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine.
The installation dimensions are 12000x2500x3020mm and the weight is 28 tons.
... ...
The installation dimensions are 12000x2500x3020mm and the weight is 28 tons.
... ...
#30601
Installing the Drillto ZT 80/160AT HDD
The Drillto ZT 80/160AT is a unique model using double rods, which has no analogues in the world! The installation allows you to work in soils of any category. For this purpose, a motor drill with a ball chisel is used. The model is widely used because it allows drilling operations in rocky soils, both in the field and in urban conditions.
Increasing the pulling force to 160 tons allows you to move the column of rods in difficult situations and continue drilling without any problems.
...
Increasing the pulling force to 160 tons allows you to move the column of rods in difficult situations and continue drilling without any problems.
...
#30602
Installing a DRILL TO ZT-95/135 HDD
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. This power unit is sufficient to develop a torque of 50,000 Nm, and the speed of rotation of the drive shaft can reach up to 90 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine.
The installation dimensions are 12000x2500x3020mm and the weight is 28 tons.
... ...
The installation dimensions are 12000x2500x3020mm and the weight is 28 tons.
... ...
#30603
Installing the DRILLTO ZT 42A HDD.
Horizontal directional drilling rig DRILLTO ZT 42A. A budget model with a powerful 179KW engine.
With a high torque of 18,500 nm, a sufficient thrust force of 42 tons, as well as a high-performance bentonite pump of 650 l/min, with proportional control directly from the operator's cabin. For drilling, the HDD installation uses a rod with a length of 3m and a diameter of 83mm. Analogues are similar in characteristics: Goodeng GD 420L, DDW 40/15, DDW 43/20, XCMG XZ420E, FORWARD RX38×160, FORWARD RX45×180, VERMEER C430 NAVIGATOR, VERMEER NAVIGATOR D80X100 SERIES II
Drilling carriage ...
With a high torque of 18,500 nm, a sufficient thrust force of 42 tons, as well as a high-performance bentonite pump of 650 l/min, with proportional control directly from the operator's cabin. For drilling, the HDD installation uses a rod with a length of 3m and a diameter of 83mm. Analogues are similar in characteristics: Goodeng GD 420L, DDW 40/15, DDW 43/20, XCMG XZ420E, FORWARD RX38×160, FORWARD RX45×180, VERMEER C430 NAVIGATOR, VERMEER NAVIGATOR D80X100 SERIES II
Drilling carriage ...
#30604
Installing the HDD DRILL TO ZT-110/135
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. This power unit is sufficient to develop a torque of 55,000 Nm, and the speed of rotation of the drive shaft can reach up to 110 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine.
The installation dimensions are 12000x2500x2950mm and the weight is 28 tons.
... ...
The installation dimensions are 12000x2500x2950mm and the weight is 28 tons.
... ...
#30605
Installing the HDD DRILL TO ZT-120/180
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. This power unit is sufficient to develop a torque of 66,000 Nm, and the speed of rotation of the drive shaft can reach up to 100 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine. The installation dimensions are 12000x2520x2950mm and the weight is 28 tons
...
The installation body ...
...
The installation body ...
#30607
Installing the HDD DRILL TO ZT-180/240
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. The development of a torque of 78000Nm is sufficient for this power unit, and the speed of rotation of the drive shaft can reach up to 120 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine. The installation dimensions are 12000x3100x2950mm and the weight is 34 tons
...
The installation body ...
...
The installation body ...
#30608
Installing the HDD DRILL TO ZT-280
A model in a number of ZT installations of the Maxi class. It is equipped with a Cummins engine with a capacity of 373 kW. The development of a torque of 90,000 Nm is sufficient for this power unit, and the speed of rotation of the drive shaft can reach up to 120 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine. The installation dimensions are 20500x3200x3450mm and the weight is 50 tons
...
The installation body ...
...
The installation body ...
#30609
Installing the HDD DRILL TO ZT-360
A model in a number of ZT installations of the Maxi class. It is equipped with two Cummins engines with a capacity of 264KW each. This power unit is sufficient to develop a torque of 130,000 Nm, and the speed of rotation of the drive shaft can reach up to 98 rpm. All this is possible thanks to the Sauer-Danfoss pumps installed on the machine. The installation dimensions are 19800x3850x3700mm and the weight is 63,500 tons.
...
The installation body ...
...
The installation body ...
#30610
#27159
#27170
#27169
1
2
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access