Installing the DRILLTO ZT 60/120 HDD.

One of the largest overall HDD installations. The pulling force is 60 tons, with an increase in force to 120 tons. At the same time, the installation is compact and works easily in urban environments!

One of the largest HDD installations for large-scale transportation and operation in urban environments is the DRILLTO ZT 60/120. At the same time, the pulling force is 60 tons, and the increase is up to as much as 120 tons. An ideal installation for making difficult transitions in urban environments. Powerful engine - 264KW. 4 DANFOSS oil pumps allow you to develop a torque of up to 38,000 nm. And the rotation speed thanks to 2 POCLAIN motors can reach up to 153 revolutions per minute. At the same time, the installation is large and a standard trawl can be used to transport it.

Installation body
The modern design format of the installation with sound insulation allows you to work in urban environments in dense buildings. And the overall dimensions of 11800x2300x2563mm with a weight of only 18 tons make it possible to transport the installation to the facilities even with a standard trawl.

Drilling carriage
The carriage, designed for drilling angles of 12-20 degrees, is mounted on a frame with metal tracks. The tracks themselves have rubber spacers, which allows the installation to be used in conditions with almost any coating, without the risk of damage.

Feeding of drilling rods
Optionally, the installation can be equipped with automatic carousel and cassette feeding rods. Semi-automatic feeding can also be installed.

Rear stabilizers
Two position stabilizers located in the rear part fix the drilling complex not only during drilling, but also during the transportation of the installation on a trawl. The stabilizers are controlled using an operator's remote control.

Operator's cabin
A modern operator's cabin with panoramic glass, protection and the ability to rotate 90 degrees gives a complete view of the entire drilling rig from the carriage to the vise. This allows you to control the operation of all systems of the complex without getting up from a comfortable operator's chair with many adjustments and comfortable armrests. The cabin has air conditioning and a heater for comfortable operation at any time of the year.

The Control panel
An LCD monitor is located opposite the operator's chair to display all the parameters of the drilling complex operation. The location of the monitor does not block the view of the installation sites, at the same time it is always in front of the operator's eyes. Additionally, a panel with control keys and additional backup pressure gauges is located to the left of the chair.

Anchor plate
A plate for drilling anchors is located in the front of the installation. This allows the drilling rig to be securely fixed at the drilling site.

The rod rotation reducer
and rack-and-pinion drive system used in the installation allows you to increase the strength and smoothness of the carriage. The carriage itself is equipped with a mechanism for increasing the pulling force to 120 tons, which makes it possible to easily move the column of drilling rods and finish drilling in difficult situations. Two Poclain/Danfoss motors for rotation - allow you to develop a torque of up to 38000Nm, with a rotation speed of up to 153rpm.

Barbell Unwinding vise
When using a vise, minimal wear of the drilling rod threads is achieved. The vise is equipped with an automatic lubrication system for drilling rod threads.

Bentonite pump
A drilling pump with ceramic cylinders is located at the rear of the drilling complex.
The pump capacity is 760l/min and the pressure is 10MPa.

Engine
The ZT 60/120 is equipped with a 194KW CUMMINS engine. This power unit is sufficient for the operation of all components of the drilling complex.

Hydraulics
Sauer-Danfoss oil pumps for rotation, feed and reverse thrust ensure reliability, stability and guaranteed operation of the hydraulic system of the HDD installation.

Crane manipulator
A manipulator crane with a lifting capacity of 2 tons is installed on the machine. It is possible to install a faucet up to 3.5tons.

Washing gun
It is intended for cleaning the drilling tool and the machine itself after drilling.