Installing the Drillto ZT-12CDF HDD

Installing the Drillto ZT-12CDF HDD. A simple and reliable rack-and-pinion model, it is equipped with a cabin with a heater and air conditioning for operation in all weather conditions, which similar machines of this class cannot boast of. The 93KW Cummins engine combined with high-quality hydraulics allows you to develop a torque of up to 4500Nm, while the rotation speed can reach 200 rpm. A powerful bentonite pump with ceramic cylinders with a capacity of 240 liters/min and a shut-off valve ensures the supply of drilling mud. An anchor system, a cassette for 32 drilling rods with automatic feeding and lubrication of drilling rods - everything for fast and comfortable work of the crew. There is also an electric oil heater if you need to warm up the system during the cold season. For operation, the complex uses drilling rods 50x3000mm, the thread D16 FS-1 is the same as on the VERMEER D16X20, 16x20 SII, D18X20, DDW 10/04 installations. A similar drilling rod is used on the Forward RX14x50, DDW 13/05, but 2 meters long.

Dimensions of the complex
A small HDD installation with a cabin. Dimensions 5610x2000x2500mm.
It can be easily transported on almost any body, and it moves on rubber tracks.
The weight of the installation is only 7,410 kg.

...
Operator's cabin
One of the distinctive features of this model in comparison with competitors is the presence of an operator's cabin.
The cabin is equipped with a heater and air conditioning, which allows you to work comfortably in almost any weather conditions.

...
Position stabilizers
Two stabilizers located in the rear of the rig are used for stable operation of the drilling complex.

...
Anchoring system
An automatic anchoring system is used to securely secure the drilling rig at the work site.
4 drilling anchors securely hold the installation when working on the site.

...
Rack and pinion drive system and rod cassette
A distinctive feature of the model is also the rack-and-pinion drive system. Similar models of this class often use a chain, which is less reliable and requires more frequent maintenance.
The machine has an automatic drilling rod feeding system
with a cassette for 32 50x3000mm drilling rods.

...
Drilling rod vise
A vise for unscrewing the drilling rods is located in the front of the installation.
The vise is equipped with a cleaner, as well as a thread lubrication system.

...
Bentonite pump
Drilling pump with ceramic cylinders.
It is equipped with a valve for shutting off the drilling fluid, which works when the vise is triggered.
The pump capacity is 0-240 l/min.

...
Engine
Cummins 93KW capacity
It is more powerful than similar installations of this class, which allows you to provide a resource for high torque and rotational speeds.

...
Washing gun
For cleaning drilling tools after drilling operations.