Washed sand 1st class

Washed construction sand has unique characteristics, namely, its purity and the absence of any impurities. If we consider its composition from a chemical point of view, then the volume of impurities in it will not exceed 0.3%, and this is a fantastic result.

The washed sand can be finely and coarsely fractionated, it can have different colors, for example, gray and yellow shades. You can buy any of these types from us!

The use of washed sand is acceptable both in the construction sector and in landscaping. It is used for laying tiles and for other construction purposes. The highly refined material is suitable for masonry work, concrete mixes and brick production. Provides excellent coupling and minimal shrinkage. The only nuance that needs to be paid attention to when storing and transporting raw materials is the need to protect it from moisture and water. The structure will then remain homogeneous and loose.

The washed sand has unique properties, but the main thing is purity and absence of impurities.

Washed sand 1st class
If we consider its composition, the amount of impurities in it will not exceed 0.3-0.7% of the total volume, and this is an excellent result for any construction tasks.

It can have both small and large fractions, it can have different colors and shades from gray to yellow.

The scope of use of washed sand is very wide: from landscape design and landscaping to the preparation of building mortars and laying roads. The raw materials do not require maintenance even during storage. The only thing to remember is to protect against moisture. In this case, the structure will be as homogeneous and loose as possible.

The sand is called washed because of the unique cleaning procedure, and it can be done in different ways. For example, there are special hydromechanical devices, and there is washed sand directly from the riverbed. At the same time, the cost of such sand will always be higher than that of quarry sand, both due to the complexity of extraction and the need for washing.

Washed sand 1st class
Technical characteristics of the washed sand
All the properties of sand that the material should have are regulated by GOST standards. During the purchase, it is necessary to make sure that it meets the requirements and has a quality certificate – this is provided by GMR Group.

The most important properties are the following:

The density is 1.60 grams per cm3;
Fraction diameter from 0.15 to 0.5 cm;
The specific gravity of 1 cube (m3) is about 1.5 grams per cm3.
If the material meets these standards, it is considered high-quality and can be sold at a market price. The GMR Group company is always responsible for the quality of its materials and offers to buy them for the best price in the region for any batch wholesale and retail inexpensively with delivery in Moscow.

Washed sand 1st class
Varieties of washed sand
Each type of material may differ in its basic properties. The most popular types can be considered alluvial, river, construction, quartz, quarry and other sands. Each of them is used for different construction purposes, so before buying it is necessary to familiarize yourself with the characteristics in more detail. You can do this with the GMR Group managers.

There are several mining methods, and they differ mainly in the source of the sand. But to clean the material, you will definitely need high-quality rinsing on special equipment.

Washed sand 1st class
It is usually the quarry type that is washed, since the river type already has a sufficient level of purification from impurities. A complex cleaning procedure makes cheap quarry sand more expensive, however, it is already becoming much more versatile and suitable in a wide variety of construction fields and beyond.

It is literally indispensable for many types of activities.:

Filling the floor screed with mortar;
Production of concrete mortars;
Installation of drainage systems;
Landscaping;
Road construction;
Plastering works;
Construction of various foundations and other structures.
Washed sand 1st class
How to buy high-quality washed sand?
The choice of washed sand is very important for the quality of work. You need to pay attention and show responsibility when choosing, and it is better to talk with our experts who will help you buy the right washed sand.

The key parameters are the following:

The purity of the sand;
Compliance of characteristics with GOST standards;
Matching the type of sand activity you are going to undertake.
The washed sand undergoes a special cleaning procedure, which can be carried out by various methods. At GMR Group, flushing is carried out using hydromechanical equipment, which guarantees its high quality at a low final price per cubic meter or per ton. Order the required volume — calculate the cost and deliver it by email or phone. Payment is possible by card or by invoice.

Washed sand 1st class
The lowest price of washed construction sand in Moscow and the region
GMR group offers a huge catalog of products that meet GOST standards. The company's experts can help the client find out full information about the product, find out information about discounts, types of delivery, and the cost of products.

The price of washed construction sand per ton will depend on the volume of supplies, the brand of the material, transportation costs and other aspects.

The more impressive the batch, the lower the total cost of 1 ton or cube. GMR Group offers to buy products in any volume with pickup or prompt delivery.

Washed sand 1st class
Modern own transshipment of washed sand in Moscow and Moscow region
We provide a whole list of transshipment services, which includes:

Weighing and issuing a package of documents.
Other loading and clearance services.
Product surveillance and security system.
Storage in a warehouse.
Interaction with the railway station.
Loading using loaders.
Loading and unloading of wagons.
GMR group cooperates with quarries under direct contracts for the supply of high-quality products, therefore it guarantees optimal conditions for the purchase of material in any volume for 1 cubic meter or 1 ton.

Washed sand 1st class
Convenient and fast delivery and pickup of washed sand in Moscow and the region
If you have a large fleet of special equipment, it is more efficient to pick up the sand on your own, especially considering that we have our own transshipment. If you suddenly do not have expensive transportation equipment, our professionals will bring the raw materials on dump trucks and semi-trailers to any address in Moscow and the region, guarantee loading and unloading.

Pickup is done on dump trucks with lifting capacity from 10 to 35 tons. You arrive at the set time, the forwarder guides you, implements the full loading of the order in full accordance with the declared order. At the same time, raw materials can be purchased both from quarries and from storage sites.