EUROMIX ROLLTRUCK CMT 4000R concrete mixers

The EUROMIX ROLLTRUCK CMT 4000R self—propelled concrete mixer is a highly efficient solution for work on construction sites where autonomy and high productivity are required. Equipped with a 6.1 m3 double-cone mixing drum, this model is capable of producing up to 4 m3 of concrete in one cycle. The design of the drum with a double spiral screw and blades ensures uniform and high-quality mixing of the concrete mixture. The 116 hp YUNNEI turbocharged and water-cooled engine ensures reliable operation even in difficult conditions.

An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas.

Mixing drum:

The drum is a double-cone drum with a double spiral mixing screw, a mixing blade and a convex bottom
Geometric volume 6.1 m3
Capacity 4.0 m3/cycle
The rotation speed of the drum is 17 rpm
The volume of the water tank is 2×330 liters
The bucket is equipped with a serrated blade at the front and a hydraulic opening gate. The lifting levers are controlled by double-acting hydraulic cylinders.
Bucket capacity 600 l

Engine:

YUNNEI model, YCD 4J22G, turbocharged and water-cooled (4-cylinder)
Rated power 85 kW (116 hp)
Position The engine is mounted transversely at the rear
Euro-2 Environmental Standard

Chassis:

Wheelbase 2400 mm

The car:

Automatic transmission, 4F+ 4R shift
Cab The ROPS & FOPS type enclosed front cab is installed to the side of the loading bucket
The maximum speed is 32 km/h.
The slope to be overcome at full load is 40°
Turning radius 4000 mm
Curb weight 18,800 kg
Overall dimensions (L×W×C) 7500×2850×3600 mm (loading height 4700 mm)

Refueling tanks:

Fuel tank 230 L
The total capacity of the hydraulic system is 170 liters
Oil tank 16 L