Zoomlion ZD160-3 crawler bulldozers, Novosibirsk

Engine Model WD10G178E25
Working weight with ripper 17,882 kg
Engine type Vertical and 4-stroke supercharged and intercooled engine
The number of cylinders is cylinder diameter x stroke 6-126 x 130 mm.
Cylinder capacity 9.726L
Rated power 120KW
The nominal speed is 1850 rpm.
Maximum torsional torque 830/1100-1200N.m/r/min
Specific fuel consumption 215 g/KW.h
Starting method Engine start
Starting motor 24 V, 6.6 kw.
Generator 28 V, 1.54kw
Battery pack 24V(12V*2)
The model of the torque converter is a three-element with one degree and one phase
Cooling method water cooling
The gearbox model is a planetary gearbox crankcase for gear shifting.
Satellite, multi-disc clutch, hydraulic control, forced lubrication

Central transmission shaft Hypoid gear wheel, bubbling grease
The position of the transmission stage is 3 gears forward, 3 gears backward.
Forward speed 0~3.8 / 0~6.6 / 0~10.6 km/h.
Reverse speed 0~4.9 / 0~8.5 / 0~13.6 km/h
On-board clutch, Wet clutch, multi-disc clutch, spring clamping, hydraulic compartment, manual control.
Side brake Wet brake, Floating brake, Foot control (oil pressure booster)
Final drive Speed reduction of the second stage of the spur wheel ,bubbling lubrication
The suspension method of the trolley frame is semi-rigid, the balancing bar is floating
The number of support rollers (on each side) is 2 pcs.
The number of support rollers (on each side) is 6 pcs.
The number of guide rollers (on each side) is 1 pc.
The caterpillar model is a collapsible, single-track tooth
The step length is 203.2 mm.
The width is 510 mm.
The height of the spur is 65 mm.
The number of ground hooks (on each side) is 37 pcs.
The center-to-center distance of the caterpillar is 1880 mm.
The length of the track grounding is 2430 mm.
Specific grounding pressure 65.8 kpa
The ground clearance is 400 mm.
Weight without equipment is 16402 kg.
Hydraulic pump model gear pump
The litre of the hydraulic system is 207 liters.
The model of the control valve is a spool valve
The blade is a straight-tilt shovel
The blade width is 3416 mm.
The blade height is 1150 mm.
The maximum lifting height of the blade is 1560 mm.
The maximum blade drop is 560 mm.
The maximum inclination of the blade is 1095 mm.
The dump volume is 4.5 m3.
Type of ripper (three teeth)
The maximum baking height is 572 mm.
The maximum lifting height is 702 mm.
Soil Loosener model Parallelogram model,
Oil pressure control
Length without ripper is 5025 mm.
The width without ripper is 3416 mm.
Height without ripper 2783 mm
16,200 kg., without ripper, straight blade, Weichai E2 internal combustion engine.
17,200 kg., 3-rack ripper, straight blade, Weichai E2 internal combustion engine.
Payment terms: by agreement.