Your city — Москва?
ООО "АКВАМАРИН"
On the portal since 2024 yr.
Operates in
yr. Самара
About company
17
Rental listings
Website
https://akvamarinooo.ru/
ИНН
6316261169
Physical address
Самара
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Search section:
履带式推土机Chetra T15with blade and ripper,萨马拉
The CHETRA T20 bulldozer represents the category of tracked industrial vehicles of the 20th traction class. This model is effective when performing tasks that require high power.:
logging operations; ...
logging operations; ...
Available
#14057
Front wheel loaders SDLG / LINGONG 936 L, Samara
The LG936L front loader is a new development by the Chinese company SDLG, focused on the European market. It is a heavy machine with a load capacity of up to 3 tons, equipped with a wide bucket with a volume of 1.8 m3. Due to its size, the loader is versatile in use: it can move independently on public roads, and no special permit is required for trawl transportation.
The scope of this model is extensive. It can be used in utilities, agriculture, farming and forestry, construction sites and even mining. The LG936L loader is used to perform the following types of work: ...
The scope of this model is extensive. It can be used in utilities, agriculture, farming and forestry, construction sites and even mining. The LG936L loader is used to perform the following types of work: ...
Available
#14066
Pipe laying machines Komatsu D355,萨马拉
The Reschke 3500F medium hydraulic hammer is an impact—type attachment for a tracked excavator, which is used to solve the following tasks:
– destruction and opening of rocky soils;
– destruction of concrete and reinforced concrete structures; ...
– destruction and opening of rocky soils;
– destruction of concrete and reinforced concrete structures; ...
Available
#14064
Pipe laying machines Komatsu D355, Samara
The Komatsu D355 is a heavy tracked pipelayer that is designed to perform a full range of work during lifting and installation operations in the construction of oil and gas pipelines, where laying pipes with a diameter of more than 48 inches is required.
This special vehicle is characterized by high reliability and autonomy in operation, the ability to effectively perform its tasks in conditions of complete off–road conditions - on flat or mountainous, swampy or desert terrain, in a wide variety of climatic zones....
This special vehicle is characterized by high reliability and autonomy in operation, the ability to effectively perform its tasks in conditions of complete off–road conditions - on flat or mountainous, swampy or desert terrain, in a wide variety of climatic zones....
Available
#14063
Pipe laying machines Komatsu D155-C1, Samara
The Komatsu D155 is a heavy tracked pipelayer that is designed to perform a full range of work during lifting and installation operations in the construction of oil and gas pipelines, where laying pipes with a diameter of more than 48 inches is required.
Main work: holding the pipe thread during the operation of cleaning and insulating mechanisms; carrying out butt welding and repair operations; lowering the pipe thread into the trench; moving parts of the pipeline or other equipment (as a tractor)....
Main work: holding the pipe thread during the operation of cleaning and insulating mechanisms; carrying out butt welding and repair operations; lowering the pipe thread into the trench; moving parts of the pipeline or other equipment (as a tractor)....
Available
#14062
Pipelayers of Chetra, Samara
The TG-301 is an average pipelayer used in the construction of pipelines with diameters from 600 to 1000 mm. Performs a wide range of operations: lifting and laying pipes and weaves in trenches, loading and unloading and installation during welding, cleaning, and pipeline insulation.
The sufficient track width and heavy weight of the machine allow you to work confidently at maximum boom reach. The pipelayer is additionally equipped with a rear and front towing device. Special engine and radiator protection is provided....
The sufficient track width and heavy weight of the machine allow you to work confidently at maximum boom reach. The pipelayer is additionally equipped with a rear and front towing device. Special engine and radiator protection is provided....
Available
#14061
Caterpillar D7R crawler bulldozers with blade and ripper, Samara
Caterpillar D7R is a medium—range mining bulldozer (traction class 15). The main application of the bulldozer is working with soil of various categories. The model is suitable for arranging driving along highways, laying roads in the forest, digging and filling channels, trenches, pits, quarries, and moving land over short distances....
Available
#14060
履带式推土机Chetra T15with blade and ripper,萨马拉
Caterpillar D6R is a medium—class bulldozer (10th traction class) based on a tractor of the same brand. The model was developed for use in harsh conditions. The main purpose is to move significant volumes of materials and soil of 1-3 categories at a distance of up to 350 m. Modern and powerful attachments allow you to work with frozen soil and loose soil.
CAT D6R is also used for rock mining, a powerful engine allows you to cope with this task. The machine can be operated in high-altitude conditions, and the controls remain effective in areas with heights up to 3,000 m....
CAT D6R is also used for rock mining, a powerful engine allows you to cope with this task. The machine can be operated in high-altitude conditions, and the controls remain effective in areas with heights up to 3,000 m....
Available
#14059
履带式推土机Chetra T15with blade and ripper,萨马拉
CHTZ B10M is a bulldozer of the 10th traction class. It is produced by the Chelyabinsk Tractor Plant (CHTZ). Currently, the model is one of the most common bulldozers in its class.
The model is widely used in the forestry, oil, mining and gas industries, in construction and agriculture. The main purpose of the CHTZ B10M is to work with soil of category 1-3 (loam, sand, gravel, clay) without preliminary loosening and with soil of category 4 (frozen earth, rocks, heavy clay) with additional preparation. A bulldozer is often used to eliminate large blocks of snow....
The model is widely used in the forestry, oil, mining and gas industries, in construction and agriculture. The main purpose of the CHTZ B10M is to work with soil of category 1-3 (loam, sand, gravel, clay) without preliminary loosening and with soil of category 4 (frozen earth, rocks, heavy clay) with additional preparation. A bulldozer is often used to eliminate large blocks of snow....
Available
#14058
SCHMITZ flatbed trailer,克拉斯诺达尔
If you pay in cash, the rental price is lower.
Good discounts for long-term rentals!
Delivery to the facility by our trawl is possible. ...
Good discounts for long-term rentals!
Delivery to the facility by our trawl is possible. ...
Available
#14040
Crawler bulldozers Chetra T15 with blade and ripper, Samara
Heavy crawler bulldozer, 15th traction class. The CHETRA T15 represents a range of medium-sized machines that are suitable for performing a large amount of work. The model is designed for layer-by-layer removal of soil, mixing and moving it over short distances (up to 300 m) as part of site leveling or other work.
The technique is used in road construction, housing and landscaping. The bulldozer is suitable for handling bulk materials and snow....
The technique is used in road construction, housing and landscaping. The bulldozer is suitable for handling bulk materials and snow....
Available
#14056
Caterpillar bulldozers Chetra T11 with blade and ripper, Samara
Heavy crawler bulldozer, 10th traction class. The main area of activity of the CHETRA T11 is the loading and unloading of materials, soil, waste of various types and their movement over a distance of up to 300 m.
The bulldozer has also found its application in the following areas: oil and gas construction; earthmoving and road construction; hydraulic engineering; mining; housing construction; cleaning and removal of household garbage....
The bulldozer has also found its application in the following areas: oil and gas construction; earthmoving and road construction; hydraulic engineering; mining; housing construction; cleaning and removal of household garbage....
Available
#14055
Liebherr A902履带式挖掘机,克拉斯诺达尔
The Hyundai R520LC-9S crawler excavator is a special equipment for quarries and large construction sites. Thanks to the robust platform structure and powerful hydraulics, the machine can handle large amounts of excavation work and withstand extreme loads.
The car is being used: ...
The car is being used: ...
Available
#14054
Liebherr A902履带式挖掘机,克拉斯诺达尔
The Komatsu PC300 universal crawler excavator belongs to the middle class of special construction equipment. The model has a wide support, which provides high stability, as well as increases cross-country ability on loose and viscous soils.
The Komatsu PC300 excavator is multifunctional and capable of performing such tasks as: developing excavation pits for monolithic foundations, digging trenches for oil and gas pipelines, carrying out stripping operations, installing shafts and embankments from the ground, digging artificial ponds and pools, loading and unloading various kinds of materials, moving heavy loads over short distances....
The Komatsu PC300 excavator is multifunctional and capable of performing such tasks as: developing excavation pits for monolithic foundations, digging trenches for oil and gas pipelines, carrying out stripping operations, installing shafts and embankments from the ground, digging artificial ponds and pools, loading and unloading various kinds of materials, moving heavy loads over short distances....
Available
#14053
履带式挖掘机现代R305LC-7,克拉斯诺达尔
The Hitachi ZX330LC mid-range excavator was designed specifically for heavy-duty applications. Therefore, the main field of application is work in fields, quarries, mining, as well as in road construction.
The equipment is able to cope with such tasks as loosening solid ground masses and rocks; compaction of loose soils; creation of soil embankments; loading and unloading of various cargoes; leveling the work site; opening the asphalt layer of road sections; digging trenches and ditches; dismantling concrete or reinforced concrete objects and much more. ...
The equipment is able to cope with such tasks as loosening solid ground masses and rocks; compaction of loose soils; creation of soil embankments; loading and unloading of various cargoes; leveling the work site; opening the asphalt layer of road sections; digging trenches and ditches; dismantling concrete or reinforced concrete objects and much more. ...
Available
#14050
Tractor trucks MAZ6430S9-520-020,克拉斯诺达尔
The Hitachi ZX 200 crawler excavator belongs to the middle class of special construction equipment. As standard, it is equipped with a single bucket, which is operated hydraulically. Thanks to the powerful hydraulic system, the excavator can operate in difficult conditions.
It is a full-turn machine with high efficiency and productivity, reliability and stability, high cross-country ability and robust construction. Such qualities allow the technique to be used in conditions of limited space, in any climate and any type of foundation, including on weak soils....
It is a full-turn machine with high efficiency and productivity, reliability and stability, high cross-country ability and robust construction. Such qualities allow the technique to be used in conditions of limited space, in any climate and any type of foundation, including on weak soils....
Available
#14047
Caterpillar 320DL crawler excavators, Samara
The CAT 320DL universal crawler excavator belongs to the middle class of special construction equipment. The model has a wide support, which provides high stability, as well as increases cross-country ability on loose and viscous soils.
The CAT 320DL excavator is multifunctional and capable of performing such tasks as: digging trenches and ditches; creating embankments; loading and unloading cargo; crushing rocks and loosening hard ground; compacting loose soil; clearing industrial debris; leveling the work site; dismantling concrete and reinforced concrete structures....
The CAT 320DL excavator is multifunctional and capable of performing such tasks as: digging trenches and ditches; creating embankments; loading and unloading cargo; crushing rocks and loosening hard ground; compacting loose soil; clearing industrial debris; leveling the work site; dismantling concrete and reinforced concrete structures....
Available
#14043
Items per page:
Adding to Favorites
Your comment: