ООО МЗ "ТОНАР"

A trailer for transporting poultry in metal containers.
It has windows for ventilation.
The floor is covered with a corrugated galvanized metal sheet. There are stops for containers on the trailer floor. The front and back walls are hot-dip galvanized, which provides corrosion protection for a long period of time. ...

The lightweight dump truck semi-trailer is suitable for transporting various bulk building materials. For effective operation of the coupling, a tractor with a 4x2 wheel formula is required.

Dimensions: ...

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

The Tonar-9598 grain semi-trailer is suitable for transporting goods with a total weight of up to 30 tons. The technique can be used for various purposes. Its direct purpose is bulk transportation of grain crops and mixed feed.

Features ...

The Tonar-9599 grain semi-trailer with an aluminum body is suitable for transporting goods with a total weight of up to 35 tons. The technique can be used for various purposes. Its direct purpose is bulk transportation of grain crops and mixed feed. But the rest of the time, palletized cargo can be delivered on a semi-trailer.

Features ...

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

The semi-trailer is designed to transport poultry for slaughter in metal containers from various manufacturers.

Advantages: ...

We install bodies on cars of the customer's choice, including foreign-made ones.
A body for transporting poultry in metal containers. It has windows for ventilation.
The floor is covered with a corrugated galvanized metal sheet. There are stops for containers on the floor. ...

The advantage is the two-level loading, which allows you to accept 66 Euro pallets. In a semi-trailer, the height of the "top shelf" inside the body can be adjusted depending on the height of the pallets.

A special feature of this semi-trailer is that during its production, "thermal bridges" were avoided in the places where the racks supporting the "upper floor" were installed. The racks almost do not reduce the interior space of the body, and at the same time they do not protrude into the thermal insulation panel, thereby not causing heat loss. A cooling and heating system can be installed on this model. ...

Designed for transporting pigs and sheep with 3 loading floors.
The body is made entirely of aluminum profiles. Loading on a floor-by-floor basis.
...

Designed for transportation of pigs and sheep with 3 loading floors.
The body is made entirely of aluminum profiles. Loading on a floor-by-floor basis. Hydraulic lifting of floors with locking.
...

A new model of a 2-tier semi-trailer for transporting small livestock (pigs, sheep).
The semi-trailer is based on a two-axle Tonar-98262 chassis. The body of the semi-trailer is made entirely of aluminum profile. The second tier is stationary. Cattle are loaded onto the second tier by means of a retractable ladder from the lower tier. The model will be produced in two versions – 13.6 m and 16.5 m long. The estimated number of pigs transported will be up to 150 heads for a 13.6-meter semi-trailer....

It is intended for transportation of young piglets to rearing and fattening sites located far from reproductive farms.

Advantages: ...

Sizes:
Rear overhang, mm
1175 ...

Advantages:
- elimination of idle time of combine harvesters while waiting for cars ;
- reduction of pressure on the fertile soil layer due to wide wheels (P=1.2 kg/cm2); ...

Sizes:
Body volume, cubic meters
. 26 ...

The specialized Tonar-9984 semi-trailer is designed to facilitate the transportation of bulky tires for mining and technological dump trucks. The equipment is designed for loading four 40 R57 tires or six 33 R51 tires. Vertically fixed tires fit into the overall size and do not require special permits for transportation on public roads.

Dimensions: ...