Поиск продавцов спецтехники по городам
Your city — Москва?
Sale chip semi-trailers in Russia
Found 8 sales listings
Woodchip semi-trailers MEUSBURGER NOVTRAK SP-345
Three-axle woodchip semi-trailer, SP-345 with a body volume of 120 m3
Updated SP-345 three-axle woodchip semi-trailer with a record body volume of 120 m3! The trailer's load capacity is 29 tons. Like all products from Meusburger Novtrak, the semi-trailer is equipped with modern systems!
...
Updated SP-345 three-axle woodchip semi-trailer with a record body volume of 120 m3! The trailer's load capacity is 29 tons. Like all products from Meusburger Novtrak, the semi-trailer is equipped with modern systems!
...
#30001
Semi-trailer with sliding floors Tonar SPD4-55
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30686
Semi-trailer with sliding floors Tonar SDP3-89
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30698
Semi-trailer with sliding floors Tonar SDP4-89
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30699
Woodchip semi-trailers STAS, Yekaterinburg
Volume: 91 m3
Lifting capacity: 25 tons ...
Lifting capacity: 25 tons ...
#4500
Semi-trailer with sliding floors Tonar SPD4-55
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30697
NovosybARZ 3x-axle woodchip semi-trailers 97183V
3x-axle woodchip truck model 97183V
12-ton axles
Volume of transported wood chips:110 m3
12-ton axles
Volume of transported wood chips:110 m3
#30305
Woodchip semi-trailers MEUSBURGER NOVTRAK SP-368
SP-368 three-axle woodchip semi-trailer
The durable steel profiled body allows you to transport a wide variety of loads! New technologies in the production of our woodchip trucks make operation more convenient and easier!
The three-axle woodchip semi-trailer is designed to transport various cargoes, both bulk and packaged. ...
The durable steel profiled body allows you to transport a wide variety of loads! New technologies in the production of our woodchip trucks make operation more convenient and easier!
The three-axle woodchip semi-trailer is designed to transport various cargoes, both bulk and packaged. ...
#30002
You might also be interested in other listings:
Timber trucks Trailer ARMADA MX-14 (LPP-14), Rostov-on-Don
Loading range (cross-section) 2.5 m2
Overall width 2.56 m
Total length 5.6 - 6.6 m ...
Overall width 2.56 m
Total length 5.6 - 6.6 m ...
#17175
Tower crane
PromServisGroup LLC is the official representative of ZHEJIANG CONSTRUCTION ENGINEERING MACHINERY GROUP CO., LTD(China). We offer for delivery a NEW Tower crane ZTTZ QTZP125 (ZJT6019)headless. The boom is 60 m long. The load capacity is 8 tons. The height of the free-standing crane is 45 m. The maximum lifting weight at the end of the boom is 1.9 tons. Base mounting: 1 set of anchors. The basic section 1,6*1,6*7,5 m 1 pc. Standard section 1,6*1,6*3 m 12 pcs. Conditioner. The cable length is 120 m. Lifting wire rope Φ14*500 m. Voltage/Frequency 380V/50Hz. With a Russified safety monitor (with a collision prevention device and zone protection).
We cooperate with all federal leasing companies, and we also have the opportunity to order and bring a new tower crane to any point in the Russian Federation and install it on a construction site. ...
We cooperate with all federal leasing companies, and we also have the opportunity to order and bring a new tower crane to any point in the Russian Federation and install it on a construction site. ...
#32541
Electric cargo trolley (truck) "Progress"
We accept orders for shipment after the New Year holidays. We assemble it ourselves, all the parts are always available at the factory in Chelyabinsk.
A postponement is possible under the agreement.
With a hydroboard, price: 2,335,000 with VAT. ...
A postponement is possible under the agreement.
With a hydroboard, price: 2,335,000 with VAT. ...
#32536
Platform trolley "Record" Plus 100/20 electric
We accept orders for shipment after the New Year holidays. We assemble it ourselves, all the parts are always available at the factory in Chelyabinsk.
A postponement is possible under the agreement.
It is silent, smokeless, charges from a regular outlet, does not require any handling skills, and can be used both outdoors and indoors. ...
A postponement is possible under the agreement.
It is silent, smokeless, charges from a regular outlet, does not require any handling skills, and can be used both outdoors and indoors. ...
#32535
Logging trucks (sorting trucks) FAW J6P CA3250 6x4
Non–mileage logging truck based on FAW J6 CA3250 truck with CA6DL2-37E5 engine, EURO 5 Transmission: manual, 12-speed, synchronized, with demultiplier.
Description of the model ...
Description of the model ...
#30038
Trailers of the MEUSBURGER NOVTRAK AH-342 sorting trucks
Three-axle sorting trailer with swivel drawbar, model AH-342
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...
#29998
Ural4320ADCPT-10油罐车,Miass
Weight of the transported cargo, kg - 50,000
Curb weight of the semi-trailer, kg - 12,300
The total weight of the semi-trailer, kg is 62,300 ...
Curb weight of the semi-trailer, kg - 12,300
The total weight of the semi-trailer, kg is 62,300 ...
#18793
Caterpillar D9R履带式推土机
Weight of the transported cargo, kg - 50,000
Weight of the loaded semi-trailer, kg - 12000
The total weight of the semi-trailer, kg is 62,000 ...
Weight of the loaded semi-trailer, kg - 12000
The total weight of the semi-trailer, kg is 62,000 ...
#18739
ARMADA TF-5 (LP-5) logging trucks, Rostov-on-Don
Loading range (cross-section) 1.5 m2
Overall width 2.33 m
Total length 4.87 m ...
Overall width 2.33 m
Total length 4.87 m ...
#17176
John Deere 1510G forwarders, Saint Petersburg
Undercarriage: wheeled
In good condition. The engine is uncomplicated. The price includes VAT. It does not require investments. Serviced by an official dealer. Under the order. Possible sale on lease. Ready for operation. I'll help with the delivery.
In good condition. The engine is uncomplicated. The price includes VAT. It does not require investments. Serviced by an official dealer. Under the order. Possible sale on lease. Ready for operation. I'll help with the delivery.
#3042
Timber trucks Trailer ARMADA MX-12 (LPP-12), Rostov-on-Don
Loading range (cross-section) 2.5 m2
Overall width 2.47 m
Total length ...
Overall width 2.47 m
Total length ...
#17174
Timber trucks Trailer ARMADA TF-12 (LP-12), Rostov-on-Don
Loading range (cross-section) 2.5 m2
Overall width 2.4 m
Total length 6.2 m - 7.6 m ...
Overall width 2.4 m
Total length 6.2 m - 7.6 m ...
#17173
轮式拖拉机白俄罗斯320.4米，伊尔库茨克
The machine is designed for collecting, loading, transporting through logging areas and portages of sorts, as well as unloading, sorting and storing them. The use of the machine is effective on soils with medium and high bearing capacity.
Manufacturer: JSC "Minsk Tractor Plant"
...
Manufacturer: JSC "Minsk Tractor Plant"
...
#12240
#4371
Logging trucks (sorting trucks) Ural 55571-1151-60, Nizhny Novgorod
The load capacity is 10 tons.YAMZ-6565 Euro-4 engine, Ural 55571 chassis, tires:ID-P284 Analog 596009
#3138
Logging trucks (sorting trucks) Volvo FH 540, Saint Petersburg
The price includes VAT. Under the order. Free shipping. It does not require investments. Serviced by an official dealer. Possible sale on lease. Ready for operation.
#3062
John Deere 1510G forwarders, Saint Petersburg
Undercarriage: wheeled
In good condition. Under the order. The price includes VAT. Free shipping. It does not require investments. Possible sale on lease.
In good condition. Under the order. The price includes VAT. Free shipping. It does not require investments. Possible sale on lease.
#3057
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access