Sale vertical construction lifts in Russia

Максимальная грузоподъемность: 2 000 кг
Внутренняя ширина кабины: 1400 мм
Внутренняя длина кабины: 3000 мм ...

This scissor lift is made of high-strength steel and is used for low-altitude work. The load capacity of the PF0524 is 240 kg, the working height is 5 m. The power supply is provided by a high-capacity rechargeable battery, the charger is included in the delivery package.

Due to its small size and weight, the lift can operate in confined spaces and is used for installation, maintenance, cleaning and finishing work. The secure work platform is designed for one person. ...

PromServisGroup LLC is the official representative of ZHEJIANG CONSTRUCTION ENGINEERING MACHINERY GROUP CO., LTD(China). We offer for delivery a NEW Tower crane ZTTZ QTZP125 (ZJT6019)headless. The boom is 60 m long. The load capacity is 8 tons. The height of the free-standing crane is 45 m. The maximum lifting weight at the end of the boom is 1.9 tons. Base mounting: 1 set of anchors. The basic section 1,6*1,6*7,5 m 1 pc. Standard section 1,6*1,6*3 m 12 pcs. Conditioner. The cable length is 120 m. Lifting wire rope Φ14*500 m. Voltage/Frequency 380V/50Hz. With a Russified safety monitor (with a collision prevention device and zone protection).

We cooperate with all federal leasing companies, and we also have the opportunity to order and bring a new tower crane to any point in the Russian Federation and install it on a construction site. ...

We accept orders for shipment after the New Year holidays. We assemble it ourselves, all the parts are always available at the factory in Chelyabinsk.
A postponement is possible under the agreement.
It is silent, smokeless, charges from a regular outlet, does not require any handling skills, and can be used both outdoors and indoors. ...

Самоходный электрический коленчатый подъемник XCMG XGA16ACK по акционной стоимости до 01.10.2025

✔️ Размер платформы, мм: 1800х 760х1150 ...

In general, the design of ATS-type amphibious lifts is similar to BHT-type lifts. The main difference is that the amphibious lift is not located in a special dock when lifting the vessel, but drives directly into the water along a special inclined plane – a slip. The use of such lifts is justified if the customer already has a previously built slip, or there are strong fluctuations in the water level in the water area – more than 7 meters.
The maximum slope covered by the lift is 14%. To overcome a large slope, the lift has an all-wheel drive. The engine compartment, hydraulic and electrical equipment are placed above the crossbeam to protect against immersion. All parts that sink into the water, as well as all connections, are carefully sealed.
The vessel is lifted as follows: the lifter is lowered down the slip into the water to a depth sufficient for the vessel to enter. The slings are lowered, the vessel is positioned above them, and the vessel is lifted out of the water with the help of winches. Next, the lift slides out of the water onto the work site. During the lifting process, the operator must constantly monitor and adjust the horizontal position of the vessel's hull. At the end of the lifting, the vessel is transported to the parking place, or reloaded onto a trailer for further transportation....

BHT self-propelled lifts are used for lifting pleasure yachts, ships and ships with a dock weight from 450 to 1200 tons in marinas, yacht parks, shipyards, shipbuilding and ship repair enterprises, etc. The standard range of models includes cranes with the following lifting capacity: 470, 570/600, 670/700, 850, 900, 1000, 1100, 1300 and 1,500 tons. With a double designation, the first number indicates the lifting capacity of the crane of increased width, the second – the standard width. The dimensions, lifting capacity and configuration of cranes can be changed depending on the customer's requirements and the conditions of the tasks performed – the width of the vessels being lifted and the available docks, the size of gates, passageways, etc.
Such lifts are a spatial frame that moves on 16, and for a load capacity of over 1,100 tons - 32 wheels with pneumatic tires. The lift frame does not have a bridge in the front part, which allows lifting vessels with developed superstructures. The engine compartment is located at the bottom of the longitudinal beam of the frame, and lifting winches from 4 to 16 pieces are installed on top. The winches are capable of both synchronous and independent operation, and are equipped with electronic lifting speed control. The models in this series have a different number of lifting points, some of them are stationary, and some can be moved using hydraulics to lift vessels of various lengths, different configurations are used to solve various tasks. Polyester slings are attached to the lifting points, on which the vessel being lifted is located. The lift can have 1 or 2 (with or without load) lifting speed.
The lift engine is diesel, liquid-cooled, usually IVECO-FPT brand, engines from other manufacturers, in particular VOLVO PENTA or John Deer, can be installed on request. The engine's emission rate is TIER III. 2 motors can be installed for heavy-duty cranes. The drive of all units is hydraulic, with proportional control. ...

BHT self-propelled lifts are used for lifting pleasure yachts, ships and ships with a dock weight of 150 to 400 tons in marinas, yacht parks, shipyards, shipbuilding and ship repair enterprises, etc. The standard range of models includes cranes with the following lifting capacities: 150, 220, 300, 350, and 400/420 tons. With a double designation, the first number indicates the lifting capacity of the crane of increased width, the second – the standard width. The dimensions, lifting capacity and configuration of cranes can be changed depending on the customer's requirements and the conditions of the tasks performed – the width of the vessels being lifted and the available docks, the size of gates, passageways, etc.
Such lifts are a spatial frame moving on 8 wheels with pneumatic tires. The lift frame does not have a bridge in the front part, which allows lifting vessels with developed superstructures. The engine compartment is located at the bottom of the longitudinal beam of the frame, and lifting winches from 4 to 8 pieces are installed on top. The winches are capable of both synchronous and independent operation, and are equipped with electronic lifting speed control. The models in this series have a different number of lifting points, some of them are stationary, and some can be moved using hydraulics to lift vessels of various lengths, different configurations are used to solve various tasks. Polyester slings are attached to the lifting points, on which the vessel being lifted is located. The lift can have 1 or 2 (with or without load) lifting speed.
The lift engine is diesel, liquid-cooled, usually IVECO-FPT brand, engines from other manufacturers, in particular VOLVO PENTA or John Deer, can be installed on request. The engine's emission rate is TIER III. The drive of all units is hydraulic, with proportional control. ...

The Liugong LM09JE mast hoist is a compact and maneuverable model designed for efficient operation on construction sites and warehouses. The electric drive ensures environmental friendliness, low noise and the possibility of indoor use.

Maximum ...

LiuGong LS1212H is a self–propelled electric scissor lift.

Silent, non-polluting, easy to operate and maintain. It has high mobility, maneuverability and functionality. ...

LiuGong LT16JE is a self–propelled electric telescopic hoist.

Silent, non-polluting, easy to operate and maintain. It has high mobility, maneuverability and functionality. ...

LiuGong LT22JE is a self–propelled electric telescopic hoist.

Silent, non-polluting, easy to operate and maintain. It has high mobility, maneuverability and functionality. ...

Max. working height, m 11.6
Max. load capacity, kg 230
Total weight, t 6.6 ...

Электрический ножничный JCPT0808AC

Двигатель - электро ...

The mobile electric scissor lift is an improved version of the SJY model and features high build quality. Reinforced metal is used to produce the main parts.

The electric switch is duplicated by a remote control for the possibility of control at height. Silent hydraulic system with explosion-proof valve. ...

The SKYER DPL1568 is a reliable and efficient self—propelled diesel scissor lift. The working height of the model is 15 m, the load capacity is 680 kg. It is designed for operation in an open area, as it is equipped with a diesel engine that generates exhaust gases during operation. It is also possible to use the lift indoors, but only if it is well ventilated.

Advantages: ...

The single-masted telescopic lift SKYER GTWY6—100 is a reliable device for lifting people and goods to a height of up to 8 m for installation, repair and other work. It is equipped with a special bracket for hooking the safety rope. The load capacity of the model is 125 kg, which is enough to lift one worker and the necessary equipment. A retractable telescopic mast made of lightweight, durable aluminum alloy ensures smooth lifting of the work platform.

The alcohol level allows you to control the vertical position of the lift. Retractable outrigger supports provide stability to the model. If necessary, the SKYER GTWY6-100 can be stopped and lowered using the emergency stop buttons and the platform emergency release valve. The structure is mounted on a mobile base with a hydroelectric drive and a power supply unit. The small overall dimensions and weight allow the lift to be used in conditions of limited space. ...

The single-masted telescopic lift SKYER GTWY8—100 is a reliable device for lifting people and goods to a height of up to 10 m for installation, repair and other work. It is equipped with a special bracket for hooking the safety rope. The load capacity of the model is 125 kg, which is enough to lift one worker and the necessary equipment. A retractable telescopic mast made of lightweight, durable aluminum alloy ensures smooth lifting of the work platform.

The alcohol level allows you to control the vertical position of the lift. Retractable outrigger supports provide stability to the model. If necessary, the SKYER GTWY8-100 can be stopped and lowered using the emergency stop buttons and the platform emergency release valve. The structure is mounted on a mobile base with a hydroelectric drive and a power supply unit. The small overall dimensions and weight allow the lift to be used in conditions of limited space. ...

The two-masted telescopic lift SKYER GTWY8—200 is a reliable device for lifting people and goods to a height of up to 8 m for installation, repair and other work. It is equipped with a special bracket for hooking the safety rope. The lifting capacity of the model is 200 kg, which is enough to lift two workers and the necessary equipment. Retractable telescopic masts made of lightweight, durable aluminum alloy ensure smooth lifting of the work platform.

The alcohol level allows you to control the vertical position of the lift. Retractable outrigger supports provide stability to the model. If necessary, the SKYER GTWY8-200 can be stopped and lowered using the emergency stop buttons and the platform emergency release valve. The structure is mounted on a mobile base with a hydroelectric drive and a power supply unit. The small overall dimensions and weight allow the lift to be used in conditions of limited space. ...

KETONG 630 kg front cradle lift 9-11m/min

Specifications: ...

Scissor lift SJY-0.5-7 (380V, 500 kg, lifting height 7 m) SMART

The powerful non-self-propelled scissor lifts of the SMART SJY series are designed to perform high-altitude work from a platform: lifting workers, tools and materials to the required height. Designed for use in open and enclosed spaces. They are mainly used for finishing and repairing industrial premises, repairing overhead equipment and other construction and installation work. The reinforced design of the scissor mechanism ensures increased lifting capacity and stability of the lift, as well as guarantees the safety of its operation. ...

Scissor lift SJY-0.5-9A (500 kg, lifting height 9 m) SMART

Self-propelled scissor lifts of the SMART SJY-A series differ from non-self-propelled models by the presence of an electric wheel drive system, which makes it easy to move them from one work site to another. Designed to perform high-altitude work from a platform: lifting workers, tools and materials to the required height. Designed for use in open and enclosed spaces. They are mainly used for finishing and repairing industrial premises, repairing overhead equipment and other construction and installation work. The reinforced design of the scissor mechanism ensures increased lifting capacity and stability of the lift, as well as guarantees the safety of its operation. ...

Scissor lift SJZY-0.3-13 (300 kg, lifting height 12.8 m) SMART

Self-propelled scissor lifts of the SMART SJZY series differ from non-self-propelled models by the presence of an electric wheel drive system, which makes it easy to move them from one work site to another. Designed to perform high-altitude work from a platform: lifting workers, tools and materials to the required height. Designed for use in open and enclosed spaces. They are mainly used for finishing and repairing industrial premises, repairing overhead equipment and other construction and installation work. The reinforced design of the scissor mechanism ensures increased lifting capacity and stability of the lift, as well as guarantees the safety of its operation. ...

Добрый день, мы официальные дилеры бренда LGMG

Предлагаем подъемники различных высот: ...

Электрический ножничный JCPT1212АС

Двигатель - электро ...