Wheel Formula 6x4
GEARBOX Fast Gear 9JS135TA
YAMZ-53623.10 engine (270 hp)
Boom length (m) 20.75
Load Capacity (Tons) 25

The 4x2 wheel formula
Maximum load capacity of the midi (on ropes), t:
- with mounting on supports with extended outrigger beams 16.2
- with mounting on supports with retracted outrigger beams 4.0
Load capacity at maximum reach, t:
- main boom 8.75 m 4.0
- boom 20.75 m 0.6
Maximum load moment, t·×m 48.6
Maximum lifting height, m:
- main boom 8.75 m 9.2
- boom 20.75 m 20.4
Lifting height at maximum reach, m:
- main boom 8.75 m 2.8
- boom 20.75 m 10.0
Maximum lowering depth, m:
- when working with a load equal to 50% of the load capacity, with a main boom of 8.75m 11.0
- with a boom of 20.75 m 3.0
Reach, m:
- with a maximum load capacity of 3.0
- maximum boom 20.75 m 18.0
- minimum boom 8.75 m 3.0
The maximum weight of the load from which the boom can be telescoped, t: within
the cargo characteristics,
but not more than 1.5 t
Parameters of the reference contour:
- outrigger base, m 4.25
- distance between outriggers, m:
- with outrigger beams extended 5.4
- when the outrigger beams are retracted 2.3
Nominal lifting (lowering) speed of the load, m/min of the load, m/min 10
Increased lifting (lowering) speed of the empty hook and loads up to 2 tons, m/min 20.0
Landing speed, m/min 0,4
Rotation speed, rpm:
- maximum 1.6
- minimum 0.4
Travel speed, km/h 60
Overall dimensions in the transport position, mm:
- length 10700
- width 2550
- height 3900
Load distribution on the axle of the crane chassis in the transport position with the main boom, t:
- total 16.95
- on the front axle 6.95
- on the rear axle 10
Without overloading on the axes
Priority cargo altitude indicators in its class
Possible options: removable counterweight, jib, tires with a road construction pattern (BEL -268 in the database)
The KS-45729A-C-02 and KS-45729A-W-02 automobile crane with a lifting capacity of 16.2 tons (on ropes) is designed for loading and unloading and construction and installation work with conventional loads at dispersed facilities.
The hydraulic system of the crane installation provides smooth control of all mechanisms with a wide range of operating speeds, as well as the possibility of simultaneous combination of several crane operations. The hydraulic equipment of the crane uses components from the world's leading manufacturers.
The three–section boom with a length of 8.75 m in the retracted position provides the crane with compactness and maneuverability when moving, and when fully extended, 20.75 m provides an extensive working area and a large height of cargo movement during operation. The possibility of telescoping the boom with a load of up to 1.5 tons on a hook allows the crane to perform special work: install loads in hard-to-reach places, carry loads among mounted structures.
The possibility of installing the crane on a reduced support contour (on retracted supports) allows you to work in cramped conditions.
The gearboxes of the lifting and turning mechanism are planetary type with disc brakes, which meets modern requirements for lifting cranes. The lower frame is box-shaped with inclined hydraulic extendable outriggers.
The driver's cabin of the new design and modern design is comfortable and has a large internal volume. Circular glazing provides excellent visibility of the work area at any boom length and any angle of inclination of the boom.
The safe operation of the crane is ensured by a set of devices and devices, including a microprocessor-based ONK-160C load limiter with digital parameter indication in the driver's cabin. The load limiter can operate in the coordinate protection mode, and has a built-in "black box" device for recording characteristics, and a built-in module for protection against dangerous voltage when operating near power lines.

Truck cranes