On-board vehicle with KMU IT-150 on URAL Next chassis (model Borus 4621)

CHASSIS CHARACTERISTICS
Model
URAL 4320-72
Gross weight, kg 21 300 / 22 500
YAMZ-536 engine
Net net power, hp 283
Maximum rotation speed, min-1,2300
Maximum torque, kgf*m 120
Rotation speed at maximum torque, min-1 1 300 - 1 600
Transmission YAMZ-1105, manual, 5 st.
Transfer case of JSC "AZ URAL", 2 steps. with center differential (high gear 1.04; low gear 2.15)
NEXT cabin, behind the engine, triple
Platform Wheelbase - 4,755 mm
Driving axles of A3 URAL JSC, gear ratio 7.49
Fuel tank capacity, L 300
Tires 425/85 R21
The brake system drive is pneumatic
Preheater 14TS+10E4
CHARACTERISTICS OF THE CRANE MANIPULATOR
The IT-150 model
Number of hydraulic sliding sections 5 pcs
Load moment, tm 15
Maximum load capacity, 7,050 kg (increased)
Lifting capacity, kg at boom reach:
- 2.2 m
- 7.4 m
- 10.3 m
- 19.0 m
- at maximum flight

7 050
1 400
800
300
300
Maximum boom reach, m 19
Ambient operating temperature, °C -40...+40
Maximum lifting height / lowering depth, m 19.5 / 19.5
The control method is hydraulic
Column rotation angle, degrees. 420
Seat control position
The transport position of the supports is up
The method of extending the supports is hydraulic
Standard base of supports, mm 5,630
Weight without hydraulic pump and working fluid, kg 2,900
Capacity of the hydraulic tank, l (full / max / min) 127 / 120 / 103
Pump capacity, l/min 60
Working pressure, 24 MPa
The size of the hairpin axes, mm 703
Frame mounting size, mm 1,200