Your city — Москва?
Нерудные материалы в Улан-Удэ
Found 9 service listings
Granite crushed stone, fractional 120-200 mm
Granite rubble of 120-200 mm fraction is a large building material with high strength and wear resistance. Due to its characteristics, such crushed stone is widely used in heavy construction, especially for strengthening foundations for large facilities, the construction of railway embankments, hydraulic structures and dams. Crushed stone of this fraction is also often used in landscape design, to create decorative elements and strengthen slopes.
The bulk density of crushed stone is 1,400 t/m3, which makes it possible to ensure its resistance to external influences, including temperature fluctuations and moisture. Granite rubble is resistant to erosion and compacts well, making it ideal for use under heavy loads. ...
The bulk density of crushed stone is 1,400 t/m3, which makes it possible to ensure its resistance to external influences, including temperature fluctuations and moisture. Granite rubble is resistant to erosion and compacts well, making it ideal for use under heavy loads. ...
#2552
Granite crushed stone, fractional 16-22 mm
Granite rubble of 8-16 mm fraction is made from gabbro by crushing and sorting. This granular material has high strength characteristics and complies with international standards, which makes it ideal for a wide range of construction work. It is especially in demand in the construction of highways, as it has unique properties that increase the service life of road surfaces.
The 8-16 mm euro fraction differs from the standard fractions, providing increased resistance to frost and wear, which in turn increases the repair time for road structures. It is used in various fields, including: ...
The 8-16 mm euro fraction differs from the standard fractions, providing increased resistance to frost and wear, which in turn increases the repair time for road structures. It is used in various fields, including: ...
#2553
Granite crushed stone, fractional 4-8 mm
Granite rubble of 4-8 mm fraction is a medium-grained material, which is characterized by high strength and durability. This fraction is ideal for creating high-strength concrete mixes and reinforcing road surfaces, which makes it indispensable in the construction of various facilities.
Due to its characteristics, 4-8 mm crushed stone is actively used in the construction of reinforced concrete structures, where a high degree of strength and stability is required. It is also widely used to create decorative elements in landscape design, which makes it possible to decorate parks, gardens and homesteads. The bulk density is 1,370 t/m3, which ensures the reliability and durability of the created structures. ...
Due to its characteristics, 4-8 mm crushed stone is actively used in the construction of reinforced concrete structures, where a high degree of strength and stability is required. It is also widely used to create decorative elements in landscape design, which makes it possible to decorate parks, gardens and homesteads. The bulk density is 1,370 t/m3, which ensures the reliability and durability of the created structures. ...
#2554
Granite crushed stone, fractional 70-120 mm
Granite crushed stone of the 70-120 mm fraction is a crushed igneous rock obtained as a result of magma crystallization. This material is characterized by high strength and excellent technical characteristics, which makes it ideal for use in the production of concrete mortars and in construction. Crushed stone of this fraction complies with the GOST 8267-93 standard and is shipped from the MBZ transshipment base with the necessary documents, including waybills and a quality certificate.
The base always has crushed stone of the highest, first and second class. The classification of the material is based on strength, radiation background and the percentage of small fractions: the highest class is the purest and most durable, class 1 is with small impurities (up to 5%), class 2 is with impurities up to 10%. MBZ stores more than 3,000 m3 of non-metallic materials, which ensures the constant availability of various fractions of crushed stone. The bulk density of crushed stone of the 70-120 mm fraction is 1,400 t/m3. ...
The base always has crushed stone of the highest, first and second class. The classification of the material is based on strength, radiation background and the percentage of small fractions: the highest class is the purest and most durable, class 1 is with small impurities (up to 5%), class 2 is with impurities up to 10%. MBZ stores more than 3,000 m3 of non-metallic materials, which ensures the constant availability of various fractions of crushed stone. The bulk density of crushed stone of the 70-120 mm fraction is 1,400 t/m3. ...
#2555
Sand from crushing screenings 0-5 mm (Grade 1)
Sand from crushing screenings of 0-5 mm (grade 1) is a high—quality building material with a bulk density of 1,517 t/m3, which is actively used in various construction works. Its main advantages are its strength and precise grain fraction, which makes it ideal for use in road construction, landscaping, and as a drainage layer for tiles and paving stones.
This sand is widely used in the construction of highways, curbs and concrete screeds. The material does not contain clay, which makes it an excellent choice for the production of concrete mortars and building mixes. Screening has also found application in landscaping, in the construction of playgrounds, park areas and sidewalks. ...
This sand is widely used in the construction of highways, curbs and concrete screeds. The material does not contain clay, which makes it an excellent choice for the production of concrete mortars and building mixes. Screening has also found application in landscaping, in the construction of playgrounds, park areas and sidewalks. ...
#2556
Sand from crushing screenings 0-5 mm (Grade 2)
Sand from 0-5 mm (Grade 2) crushing screenings with a bulk density of 1,517 t/m3 is a high—quality and reliable building material that is widely used for a variety of construction and finishing works. This type of sand is particularly suitable for the production of concrete, asphalt, plaster and mortar, providing stable and high performance characteristics. Due to compliance with GOST 31424-2010 standards, sand guarantees consistent quality.
It is used to create building mixes, process various materials, as well as to arrange ground coverings. The material is suitable for both large construction projects and small repairs, contributing to the durability and strength of structures, providing reliable results in all conditions. ...
It is used to create building mixes, process various materials, as well as to arrange ground coverings. The material is suitable for both large construction projects and small repairs, contributing to the durability and strength of structures, providing reliable results in all conditions. ...
#2557
Crushed stone and sand mixture C4
The C4 crushed stone-sand mixture with a bulk density of 1,700 t/m3 is a high-strength building material that combines both coarse and fine aggregates. The mixture consists of 65% crushed stone and 35% sand, with a grain size of up to 80 mm, which provides an excellent degree of compaction and increased durability of structures.
SHPS C4 is widely used in construction for the production of concrete products, the construction of monolithic structures, the creation of foundations and road surfaces. Its high frost resistance (up to 300 freeze-thaw cycles) and weather resistance make this material indispensable for long-term construction projects, especially in harsh climates and intensive use. ...
SHPS C4 is widely used in construction for the production of concrete products, the construction of monolithic structures, the creation of foundations and road surfaces. Its high frost resistance (up to 300 freeze-thaw cycles) and weather resistance make this material indispensable for long-term construction projects, especially in harsh climates and intensive use. ...
#2558
Crushed stone and sand mixture C5
Crushed stone-sand mixture (SHPS) C5 with a bulk density of 1,700 t/m3 is a building material consisting of 60% crushed stone and 40% sand, with a grain size of 5-30 mm. SHCHPS C5 is used for the construction of foundations, road foundations, as well as for decorative coatings in landscape design. Due to its strength characteristics (M800-M1200) and frost resistance (F300), this material ensures durability and stability of structures.
The main applications include the construction of residential and industrial facilities, paving and drainage systems. SHCHPS C5 also prevents the erosion of roads and the formation of ice in winter, which makes it indispensable for various climatic conditions. ...
The main applications include the construction of residential and industrial facilities, paving and drainage systems. SHCHPS C5 also prevents the erosion of roads and the formation of ice in winter, which makes it indispensable for various climatic conditions. ...
#2559
Crushed stone and sand mixture C6
Crushed stone-sand mixture (SHPS) C6 is a high-quality building material consisting of 45% sand and 55% crushed stone with a grain size of up to 20 mm. Due to its characteristics such as high strength and frost resistance (the ability to withstand up to 300 freeze-thaw cycles), this material is widely used in the construction of roads, foundations, as well as as a base for sidewalks, playgrounds and paths.
One of the key advantages of the C6 shield is its water resistance and self-sealing ability, which greatly facilitates the installation process and increases the reliability and durability of the finished coatings. This makes the material an ideal choice for creating stable and durable coatings, especially in regions with harsh climates where resistance to extreme temperature conditions and environmental influences is important. ...
One of the key advantages of the C6 shield is its water resistance and self-sealing ability, which greatly facilitates the installation process and increases the reliability and durability of the finished coatings. This makes the material an ideal choice for creating stable and durable coatings, especially in regions with harsh climates where resistance to extreme temperature conditions and environmental influences is important. ...
#2560
You might also be interested in other listings:
Quarry sand grade 1-3
Today, quarry sand is one of the most popular materials in construction. It consists of small solid particles of grain and has excellent natural properties along with low cost. The highly refined material is suitable for masonry work, concrete mixes and brick production.
Quarry sand is versatile and is used in all areas of agriculture and industry. It is often used for road construction, as a means for leveling construction sites, for adding to dry mixes and for mixing concrete mortars. Provides excellent coupling and minimal shrinkage. It is used for laying tiles and for other construction purposes. ...
Quarry sand is versatile and is used in all areas of agriculture and industry. It is often used for road construction, as a means for leveling construction sites, for adding to dry mixes and for mixing concrete mortars. Provides excellent coupling and minimal shrinkage. It is used for laying tiles and for other construction purposes. ...
#2700
Washed sand 1st class
Washed construction sand has unique characteristics, namely, its purity and the absence of any impurities. If we consider its composition from a chemical point of view, then the volume of impurities in it will not exceed 0.3%, and this is a fantastic result.
The washed sand can be finely and coarsely fractionated, it can have different colors, for example, gray and yellow shades. You can buy any of these types from us! ...
The washed sand can be finely and coarsely fractionated, it can have different colors, for example, gray and yellow shades. You can buy any of these types from us! ...
#2701
Seeded sand 1st class
Quarrying sand is often impractical from an economic point of view, and if the task is to maximize flowability, it is dried with heated gases and sieved. Therefore, seed sand is considered one of the highest quality – it provides a homogeneous fraction and protection from impurities.
The sifted material with homogeneous particles is suitable for mortars, plaster, decorative coatings. It is used in various fields: from private construction to industrial. ...
The sifted material with homogeneous particles is suitable for mortars, plaster, decorative coatings. It is used in various fields: from private construction to industrial. ...
#2702
River sand 1st class
River sand is the cleanest, safest and highest quality material without foreign impurities in comparison with any analogues. Plus, it is versatile in its application – it is great for road and construction work, for landscaping and even for filling sandboxes.
River sand has round-shaped particles, due to which it has special properties and characteristics, it does not contain clay and other impurities. ...
River sand has round-shaped particles, due to which it has special properties and characteristics, it does not contain clay and other impurities. ...
#2703
Concrete batching fraction 5-20 mm
A 5-20 mm concrete hammer is a small piece of building material, mainly a dried cement-sand mixture. It is obtained by crushing concrete products. This category also includes cinder blocks, broken bricks, and other elements that remain after the destruction of building walls, floors, ceilings, and other structures. A fine fraction for the production of mixtures, filling and strengthening of foundations.
Such a building material has a lot of applications: grouting, which reduces the cost of construction, filling to form roads, or to create cushions for the main road surface. Such a battle of concrete may well replace crushed stone and will significantly save on construction. Its price is much cheaper than that of granite, gravel and other materials. At the same time, it must be borne in mind that the concrete fight cannot be compared with them in strength. ...
Such a building material has a lot of applications: grouting, which reduces the cost of construction, filling to form roads, or to create cushions for the main road surface. Such a battle of concrete may well replace crushed stone and will significantly save on construction. Its price is much cheaper than that of granite, gravel and other materials. At the same time, it must be borne in mind that the concrete fight cannot be compared with them in strength. ...
#2704
Concrete batching fraction 20-40 mm
A 20-40 mm concrete batching fraction is a durable material obtained after crushing concrete and bricks.
20-40 mm concrete batches are medium–sized pieces of building materials, mainly concrete slabs and iron-concrete structures, which have been recycled and carefully sifted, so they can be reused in construction. It is widely used in various works, from filling pits to strengthening road foundations and producing asphalt and sand-concrete mixtures. Such a material is economically advantageous where it is necessary to save money, and where the load on the structure will not be excessive. ...
20-40 mm concrete batches are medium–sized pieces of building materials, mainly concrete slabs and iron-concrete structures, which have been recycled and carefully sifted, so they can be reused in construction. It is widely used in various works, from filling pits to strengthening road foundations and producing asphalt and sand-concrete mixtures. Such a material is economically advantageous where it is necessary to save money, and where the load on the structure will not be excessive. ...
#2705
Concrete batching fraction 40-70mm
40-70 mm concrete batching is the largest type of concrete batching – it is extracted by destroying old reinforced concrete and concrete structures, crushing the resulting materials and sifting them into fractions. A large fraction for filling sites, strengthening the foundations and leveling the terrain. It is obtained by crushing concrete slabs and bricks. It is advisable to use such a building material, which cannot boast of high strength, in order to save money for filling pillows, for mixing solutions for non-capital structures and for many other purposes. It is used in various facilities, including building construction.
You can buy high-quality materials that meet quality standards from GMR Group with fast delivery in Moscow and at an affordable price. Deliveries by dump trucks, wholesale and retail. We work quickly and accurately, observing deadlines and conditions. ...
You can buy high-quality materials that meet quality standards from GMR Group with fast delivery in Moscow and at an affordable price. Deliveries by dump trucks, wholesale and retail. We work quickly and accurately, observing deadlines and conditions. ...
#2706
Asphalt chips of 5-30mm fraction
Asphalt chips are a popular building material that is in high demand. Recyclable materials are extracted by recycling old asphalt, so it is cheap and helps to save money on construction. It is used for strengthening foundations, filling out road facilities and landscaping. It is suitable for laying in a mixture with peat or crushed stone.
You can buy asphalt chips with a fraction of 5-30 millimeters at GMR at a low price and with fast delivery throughout Moscow and the region.
...
You can buy asphalt chips with a fraction of 5-30 millimeters at GMR at a low price and with fast delivery throughout Moscow and the region.
...
#2707
Asphalt chips of 30-100mm fraction
Asphalt chips can be attributed to widely demanded building materials, which are in great demand. It is extracted by recycling old asphalt, so it is cheap and allows you to save a lot on road construction. It is used for filling temporary roads, industrial facilities and territories with increased load. It has high strength and can be used as a reagent or as an alternative to brick and stone. You can buy asphalt chips of 30-100 mm in GMR at a low price and with prompt delivery throughout Moscow. The sale is carried out from our own warehouse — from one cube.
Features and types of asphalt chips 30-100 mm ...
Features and types of asphalt chips 30-100 mm ...
#2708
Asphalt chips from under the milling cutter
Asphalt chips are widely in demand in various spheres of human activity, including due to their low price. It is extracted by processing asphalt using a transport with a milling cutter – it is cut and crushed directly on site, loaded and delivered to customers or warehouses. Durable and versatile material for filling temporary roads, playgrounds and landscaping. It has a high density and stability, and can be used as an alternative to brick and stone.
GMR Group is ready to offer you to buy fresh and high-quality asphalt chips from milling cutters in any quantities with delivery throughout Moscow and at a reasonable price. ...
GMR Group is ready to offer you to buy fresh and high-quality asphalt chips from milling cutters in any quantities with delivery throughout Moscow and at a reasonable price. ...
#2709
Asphalt chips from under the crusher
Asphalt chips are a widely demanded building material, which is in great demand. It is extracted by recycling old asphalt, so it is cheap and allows you to save a lot on road construction. Durable and versatile material for filling temporary roads, playgrounds and landscaping. It has a high density and stability, and can be used as an alternative to brick and stone.
You can buy asphalt chips of 30-100 mm in GMR at a low price and with prompt delivery throughout Moscow. Deliveries from 1 cube from our own warehouse, dump truck delivery to any place in Moscow and the region. ...
You can buy asphalt chips of 30-100 mm in GMR at a low price and with prompt delivery throughout Moscow. Deliveries from 1 cube from our own warehouse, dump truck delivery to any place in Moscow and the region. ...
#2710
Crushed stone 4-8 mm
Specifications
Gost 32703
Crushing grade M1400 ...
Gost 32703
Crushing grade M1400 ...
#2711
Crushed stone 8 - 11.2 mm
Specifications
Gost 32703
Crushing grade M1400 ...
Gost 32703
Crushing grade M1400 ...
#2712
Crushed stone 11.2 - 16 mm
Specifications
Gost 32703
Crushing grade M1400 ...
Gost 32703
Crushing grade M1400 ...
#2713
Crushed stone 16 - 22.4 mm
Specifications
Gost 32703
Crushing grade M1400 ...
Gost 32703
Crushing grade M1400 ...
#2714
Screening of crushed stone 0 - 4 mm
The screening of 0-4 mm crushed stone is a by-product of the crushed stone production process. This material is formed as a result of screening and separation of crushed stone into different fractions using sorting sieves. It consists mainly of fine crumbs and dust, which are not suitable for use as crushed stone of a certain fraction.
It can contain particles of various shapes and structures. Screening of 0-4 mm crushed stone can be used in various construction industries, such as asphalt production, as well as in road construction. This material is often used as a filler or filler, as well as as an additive to other building materials to improve their properties. It can be used in the construction process to create concrete mixes, asphalt pavements or other building structures. ...
It can contain particles of various shapes and structures. Screening of 0-4 mm crushed stone can be used in various construction industries, such as asphalt production, as well as in road construction. This material is often used as a filler or filler, as well as as an additive to other building materials to improve their properties. It can be used in the construction process to create concrete mixes, asphalt pavements or other building structures. ...
#2715
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access