Vehicle Characteristics
- Manufacturer of LLC "KCC";
- Car model
6590-120921-48 - Vehicle type On-board vehicle with CMU
- KANGLIM 1256 manipulator model
- Type of CMU Cable
- The boom type is L-shaped
- Column rotation angle, degree 360
- Control location upper control post
- Control location when mounted on outriggers from the ground
- Number of sections, pcs. 6
- Load torque, t*m (kNm) 15
- Maximum departure, m 18.7
- Minimum departure, m 2
- Lifting capacity of the manipulator at maximum reach, kg 300
- Lifting capacity of the manipulator with a minimum reach, kg 6500
- Internal body length, 6818 mm
- Inner width of the body, mm 2470
- Internal height of the body, mm 730
- Additional sliding rear supports
- Wooden floor covering
- The rear and side sides of the platform are metal, folding
- Maximum speed, 80 km/h
- Pin-loop towing device
- Length, mm 10550
- Width, mm 2550
- HEIGHT, MM 3695
- Remote control panel on the right in the database
- Weight parameters, loads
- Load capacity, kg 10100
- Curb weight, kg 13000
- on the FRONT AXLE 5460
- on the REAR CART 7540
- Total weight of the car, kg 23100
- on the front axle of the 5120
- ON THE REAR CART 17980
- The total weight of the towed trailer, kg 14000
- Total weight of the road train, kg 37100

Engine
- Internal combustion ENGINE MODEL KAMAZ 667.511-300
- Number and arrangement of 6 cylinders, in-line
- Environmental class EURO-5
- Diesel fuel
- Maximum power, hp 292
- Maximum power, kW 215
- at a rotation speed, rpm 2500
- Maximum torque, Nm 1087
- at a rotation speed, rpm 1300
- Max. idle speed, rpm 2850
- Min. idle speed, rpm 600-800
- Maximum operating height, m 3000
- Working volume, l 6.7
- Compression ratio 17.2

Transmission box
- The ZF KAMA 1310 TO gearbox model
- Type of manual transmission gearbox
- Number of forward gears - 9, reverse - 1
- Maximum torque, Nm 1300
- Gear ratios 9.48-0.75

The cabin
- Cabin performance Restyling-1
- Sleeping place 1 sleeping place
- The roof is high
- Tilting of the cabin hydraulic lift
- There is an aerodynamic sun visor
- The driver's seat is sprung
- There is a tachograph
- There is a UVEOS

Chassis Characteristics
- Base chassis: 65117-3010-48
- Double-sided bushing
- There is an ICD
- There is a MOB
- There is ABS
- Clutch ZF-Sachs MFZ-430
- Tires 11.00 R20 or 11R22.5
- Wheels 7.5-20 or 8,25-22,5/7,5-22,5
- Main gear ratio 5.94
- There is a preheater
- Exhaust direction to the left
- Wheelbase, mm 4970+1320
- Remote control panel on the right in the database

Cranes (manipulators)