Sale of concrete mixing equipment in Anadyr

The AMKAR 704783-31 mixer is a construction machine with a mixing drum with a volume of 12 cubic meters on the FAW 3310 chassis with an 8x4 wheel formula.

Description of the model ...

The EUROSILO cement silo of welded construction is designed for receiving cement from a cement truck, storing and delivering it via a screw conveyor to the concrete mix preparation site. Cement is loaded into the silo via a pneumatic cement pipeline, and an aeration system is installed in the lower (conical) part of the silo to ensure non-stop material supply.

The EUROSILO cement silo of welded construction is designed for receiving cement from a cement truck, storing and delivering it via a screw conveyor to the concrete mix preparation site. ...

ZHS3000P self—propelled forced concrete mixer with self-loading is a powerful and reliable equipment designed for efficient preparation and transportation of concrete mixes on various types of construction sites. With innovative solutions and a high level of automation, the ZHS3000P provides maximum productivity and user-friendliness, making it an ideal choice for large construction projects.

Main Features of ZHS3000P: ...

The EUROMIX ROLLTRUCK CMT 6500R self-propelled concrete mixer is a high-performance and multifunctional equipment designed for autonomous production, transportation and unloading of concrete mixes on construction sites. This model is equipped with a 9.2 m3 double-cone drum, which can produce up to 6.5 m3 of concrete in one cycle. The drum is equipped with a double spiral screw and blades for efficient mixing of the components, and the convex bottom contributes to a more uniform discharge of the mixture.

Main Features: ...

EUROMIX 400.8 screw (gerotor) mortar pumps manufactured by the EUROMIX PLANT are designed for pressure transportation of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX gerotor mortar pumps 400.8.300/500/1000 They are used in production lines to supply the prepared concrete mix from the mixing plant to the forming equipment. Paired with concrete mixers, EUROMIX pumps 400.8.300/500/1000 They can be used on construction sites when installing floors and insulating roofs, as well as when mixing and pouring the mixture into the formwork.

EUROMIX mortar pumps 400.8.300/500/1000 They are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...

Advantages
The boom is made of high-strength grade 900 structural steel with high strength and light weight. Due to the final element and dynamic analysis, the structure is optimized, and the boom has a beautiful shape and good bearing capacity.
The boom is a six-section arm of the RZ type that folds, unfolds and has flexible fabrics, and the angle of the boom allows for a wider range of fabrics to meet different fabric needs. ...

Zoomlion HBT60.16.110SU electric concrete pump, 2020

Specifications: ...

The AS-MK-4 unmanned aircraft system surpasses similar copters in its class in flight time — 80 minutes with a payload of 2 kg on board. The ground control station allows you to fly accurately, skirting the terrain.

It is a compact UAV with vertical takeoff and landing, capable of handling a large number of target loads: from cameras and thermal imagers to airborne laser scanning systems and atmospheric pollution sensors. ...

Country of manufacture Turkey
6-in-1 front bucket (1.1 cubic meters)
Maximum digging depth 5800 mm ...

The XGMA XG614H ground vibration rollers are in stock and available for test drive.

All-wheel drive, weight 15 tons ...

Trucks on the FAW 8x4 chassis are powerful and easy–to-maintain, comfortable and easy-to-drive vehicles with a lifting capacity of up to 30 tons. The maximum speed in full gear is 90 km/h.

Description of the model ...

Non–mileage logging truck based on FAW J6 CA3250 truck with CA6DL2-37E5 engine, EURO 5 Transmission: manual, 12-speed, synchronized, with demultiplier.

Description of the model ...

The FAW 6x4 multi–lift is a Chinese-made machine that is used to transport containers from 4,800 to 7,200 mm long.

Model description Multi-lift FAW J6 6x4 HYVA ...

The FAW J6 series truck tractors with the factory code CA4250 P66K24T1E5 are trucks from a Chinese manufacturer of commercial vehicles that are adapted to the peculiarities of climatic and road conditions in Russia.

Scope of application ...

Unmanned cargo helicopter SH-3000 with a lifting capacity of up to 1000 kg

Air transportation of various cargoes to remote infrastructure facilities. ...

AC-MK-6 Flight time is 75 minutes with a payload of 2 kg on board. The AS-MK unmanned aircraft system with vertical takeoff and landing is capable of operating with a large number of target loads: from cameras and thermal imagers to airborne laser scanning systems and atmospheric pollution sensors.

The flight time is 75 minutes with a payload of 2 kg on board. The ground control station allows you to fly accurately around the terrain. The only difference from the AC-MK-4 model is the number of engines. The hexacopter scheme, unlike the quadcopter, has one main operational advantage — if up to two engines fail in the air, the device will be able to continue flying and land safely. ...

Three-axle sorting trailer with swivel drawbar, model AH-342
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...

D-20 With the ability to fly at a distance of up to 1,000 km and an autonomy of up to 14 hours

The D-20 unmanned aircraft system with an internal combustion engine is designed to perform work on remote, extended facilities and large-area facilities. In 14 hours of flight, the D-20 is capable of covering more than 1,000 km. The D-20 UAS includes: ...

ZALA T-22 medium-range UAV helicopter with autopilot for aerial photography, laser scanning and cargo delivery
Range of 5+ km
Flight duration 35+ minutes ...

ZALA T-16
The time-tested most popular type of UAV in the Russian Federation.
...

The Albatross D5 is used to deliver special cargoes to the work site and video monitoring with an optical tracking system.

To perform autonomous flight, the device is equipped with an autopilot and various sensors. ...

The M5 AGRO unmanned complex is designed for
agricultural enterprises. The M5 AGRO unmanned complex is a ready-made solution for agriculture. It allows you to receive and independently process information about your fields and the operations taking place on them. The kit includes: an Albatross M5 UAV, a camera, a ground control station, and additionally a multispectral camera can be included in the complex. The warranty is 1 year or 100 take-off/landing cycles.
...

Albatross M1
This device is characterized by ease and speed of deployment, the ability to launch from any location. It is optimal for aerial photography and video monitoring at medium distances. Flight time of 1.5 hours and easily replaceable batteries will allow you to solve almost any task with it. The body of the device is made of composite materials, with mainly carbon fiber power elements.
...

Geoscan 201 Geodesy

A complex for aerial photography and modeling of vast territories and extended objects with a photogrammetric camera and a GNSS receiver. A complex for aerial photography with a flight time of up to 3 hours. Geoscan 201 Geodesy allows you to shoot up to 80 square kilometers per day and obtain orthophotographs with geo-reference accuracy that meets the requirements of the 1:500 scale. And thanks to the geodetic GNSS receiver on board, it is possible to obtain the exact coordinates of the snap images and improve the quality of data processing. ...

BONUM Machine-building Plant, a popular manufacturer of specialized trailers and semi-trailers, as well as special cargo and agricultural machinery in Russia, offers to buy a roll truck: a curtain three-axle semi-trailer for transporting steel coils at a bargain price in Moscow.

A special feature of semi-trailers is the presence of special recesses in the floor, into which the rolled cargo is placed and fixed. If not necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...