Scissor lift SJZY-0.3-13 (300 kg, lifting height 12.8 m) SMART
Self-propelled scissor lifts of the SMART SJZY series differ from non-self-propelled models by the presence of an electric wheel drive system, which makes it easy to move them from one work site to another. Designed to perform high-altitude work from a platform: lifting workers, tools and materials to the required height. Designed for use in open and enclosed spaces. They are mainly used for finishing and repairing industrial premises, repairing overhead equipment and other construction and installation work. The reinforced design of the scissor mechanism ensures increased lifting capacity and stability of the lift, as well as guarantees the safety of its operation.
...
The GEARSEN TL hydraulic crane is an autonomous folding (folding not only the upper part, but also the lower) mobile device designed for lifting, lowering and moving cargo over short distances. It is most often used in warehouses, workshops, car service stations and other places where it is difficult to place a stationary crane. The crane has a boom that easily allows you to transport a particular part or unit. The boom has several departure positions, which makes it possible to better adapt the crane to perform specific tasks. Despite its compactness and mobility, the model has an impressive load capacity of 2000 kg. The hydraulic system is operated manually.
Короткобазный автокран XCMG XCR30_S – самый маленький кран в линейке самоходных. Обладает грузоподъемностью 30 т и максимальной длиной стрелы с гуськом до 42 м. Может использоваться как при погрузочно-разгрузочных, так и при строительно-монтажных работах.
XCMG XCA60_S all–terrain truck crane is a high-performance construction equipment for loading and unloading operations of any complexity. Due to the all-wheel drive mechanism, the chassis provides good maneuverability over difficult terrain and off-road terrain, and is suitable for working on a mountain slope. The crane has a maximum lifting capacity of 60 tons and a fully extended boom length of 64 m. Several driving modes in four different types of operating conditions – urban, rural, highway and off-road, allow you to set the appropriate mode.
SKYER PLH0823 is a scissor electric lift from the reliable SKYER brand. It is suitable for installation, repair, finishing, and maintenance work both indoors and outdoors. Easy to learn and maintain. It is in demand in warehouses and construction sites. Due to its narrow base, it can work in cramped conditions.
One charge of the SKYER PLH0823 battery is enough for 8 hours of continuous operation. The built-in counter allows you to track the number of hours worked. Solid-cast tires do not damage the floor covering, ensure the stability of the SKYER PLH0823 when lifting. The load capacity of the model is 230 kg, the working height is 7.8 m.
...
The SKYER DKP2025 is a compact and maneuverable self—propelled diesel crank lift. The working height of the model is 20.1 m, the load capacity is 250 kg. It is equipped with a boom with a rotating jib, which allows you to overcome obstacles and reach difficult work areas. It is designed for operation in an open area, as it is equipped with a diesel engine that generates exhaust gases during operation. It is also possible to use the lift indoors, but only if it is well ventilated.
Three-axle sorting trailer with swivel drawbar, model AH-342
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...
BONUM Machine-building Plant, a popular manufacturer of specialized trailers and semi-trailers, as well as special cargo and agricultural machinery in Russia, offers to buy a roll truck: a curtain three-axle semi-trailer for transporting steel coils at a bargain price in Moscow.
A special feature of semi-trailers is the presence of special recesses in the floor, into which the rolled cargo is placed and fixed. If not necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer.
...
A complex for aerial photography and modeling of vast territories and extended objects with a photogrammetric camera and a GNSS receiver. A complex for aerial photography with a flight time of up to 3 hours. Geoscan 201 Geodesy allows you to shoot up to 80 square kilometers per day and obtain orthophotographs with geo-reference accuracy that meets the requirements of the 1:500 scale. And thanks to the geodetic GNSS receiver on board, it is possible to obtain the exact coordinates of the snap images and improve the quality of data processing.
...
Albatross M1
This device is characterized by ease and speed of deployment, the ability to launch from any location. It is optimal for aerial photography and video monitoring at medium distances. Flight time of 1.5 hours and easily replaceable batteries will allow you to solve almost any task with it. The body of the device is made of composite materials, with mainly carbon fiber power elements.
...
The M5 AGRO unmanned complex is designed for
agricultural enterprises. The M5 AGRO unmanned complex is a ready-made solution for agriculture. It allows you to receive and independently process information about your fields and the operations taking place on them. The kit includes: an Albatross M5 UAV, a camera, a ground control station, and additionally a multispectral camera can be included in the complex. The warranty is 1 year or 100 take-off/landing cycles.
...
We use cookies. By continuing to use the site, you agree to the use of cookies and personal data processing in accordance with
the Personal Data Processing Policy.