Your city — Moscow?
Sale of special equipment in Arkhangelsk
Found 233 sales listings
XCMG XE55DA Crawler Mini Excavators
The coordinated optimization of the hydraulic system and engine reduces fuel consumption by more than 6%. By increasing the working volume and pressure of the rotary motor, the torque increases by 15%, which makes it easier to work on the slope. The industry's first closed sunshade for a 6-ton cabin, which avoids direct sunlight and protects drivers from all sides.
Warranty: 24 months or 3000 m/h ...
Warranty: 24 months or 3000 m/h ...
#30344
XCMG XE210WD Wheeled Excavators
By using an exclusive low-speed, high-torque motor, after careful design and adjustment, it can achieve steady stability and high power output at low speed, as well as improve energy efficiency and fuel economy.
The advanced wheel braking system increases the braking efficiency of the car. This eliminates the problem of swinging the machine when excavating. ...
The advanced wheel braking system increases the braking efficiency of the car. This eliminates the problem of swinging the machine when excavating. ...
#30340
XCMG XC8-S2570 Backhoe Loaders
The 3-in-1 backhoe loader from XCMG, the No. 1 manufacturer of special equipment in China, is a multifunctional equipment that can be equipped with various auxiliary equipment for excavation, material harvesting, removing and crushing the pavement, leveling the site, digging ditches, laying pipelines and other operations.
This machine is widely used in agriculture, construction, laying of municipal sewage and telecommunication lines, maintenance of highways - it is a multifunctional model for performing several tasks with one machine. ...
This machine is widely used in agriculture, construction, laying of municipal sewage and telecommunication lines, maintenance of highways - it is a multifunctional model for performing several tasks with one machine. ...
#30338
Empty container wheel loaders XCMG XCS1009K
Maksim. Load capacity, kg 10000
Stack capacity 6-5-4
Maksim. lifting height, mm ≥13600 ...
Stack capacity 6-5-4
Maksim. lifting height, mm ≥13600 ...
#30320
XCMG XGH90X55R Scrubbing machines
The XCMG XGH90X55R floor cleaning machine is a device that is capable of cleaning any type of floor covering due to the mechanical action of a rotating brush and the chemical action of a solution of water and detergent. As you move, the machine removes dirt and prevents the cleaning solution from soaking into the floor. The floor can be treated with plain water or with the addition of a chemical detergent. A spacious solution tank with a volume of 90 liters provides a cleaning width of 560 mm. Two 12 V rechargeable batteries with a capacity of 100 Ah provide a working time of up to 3.5 hours.
Cleaning area width, mm ...
Cleaning area width, mm ...
#30318
XCMG GR256 Heavy Graders
The GR256 heavy grader is widely used to level the ground and create a stable layer in quarries. Due to their versatility and high performance, graders have been used for bulldozing, laying roadbed mixes, and restoring the original landforms. They are also used for snow removal in cold regions. The GR256 model is designed for heavy duty applications. It is equipped with a 260 horsepower engine, high-strength components and sufficient motive power.
Weight, t 19.5 ...
Weight, t 19.5 ...
#30325
XCMG XQZ178 Drilling Rigs
The XQZ178 drilling rig is designed for efficient drilling with a submersible pneumatic hammer in difficult geological conditions. Its high maneuverability, compact size and high productivity make it an ideal choice for the construction and mining industries, where high precision and drilling performance are required over a wide range of diameters. The installation is equipped with modern hydraulic and electrical systems that ensure the accuracy and reliability of operation. The power plant includes a modern, economical internal combustion engine with a large reserve of power, meeting high environmental standards, produced by the world leader in the engine industry. The robust frame and transmission design guarantees durability and resistance to mechanical stress. The installation meets the requirements of ROPS/FOPS and meets the high requirements of safety, ergonomics and comfort for the operator and maintenance personnel....
#30326
Geax EK60 CFA Drilling Rigs
Drilling piles with kelly rod
Continuous Hollow Auger -CFA ...
Continuous Hollow Auger -CFA ...
#30317
Drilling rigs MAIT HR40
The maximum drilling diameter is 900 mm.
Drilling depth 26 mm ...
Drilling depth 26 mm ...
#30314
Drilling rigs MAIT BABY DRILL
The maximum drilling diameter is 600 mm
Drilling depth is 18 meters ...
Drilling depth is 18 meters ...
#30313
Drilling rigs Enteco E 9000
The complete list of the E9000 series includes five main models with a total operating weight from 60 to 220 tons. Within this range, there are powerful drilling rigs capable of handling large construction projects.
Depending on the tasks set, drilling rigs can be equipped with various rotor feeding systems, such as a hydraulic cylinder and a Pull-Down winch. ...
Depending on the tasks set, drilling rigs can be equipped with various rotor feeding systems, such as a hydraulic cylinder and a Pull-Down winch. ...
#30310
Drilling rigs Enteco E 6000
The E6000 series includes drilling rigs with an operational weight of 40 to 70 tons with a traditional mast connection via a pantograph. Depending on the customer's needs, it is possible to install both a hydraulic cylinder and a Pull-Down winch to move the rotor.
All models of the E6000 series are equipped with a reinforced frame, which allows the installation of rear hydraulic supports (outriggers) to increase the force generated during tool immersion, which in turn is very important when working with technologies such as well rolling and drilling piles in the casing. ...
All models of the E6000 series are equipped with a reinforced frame, which allows the installation of rear hydraulic supports (outriggers) to increase the force generated during tool immersion, which in turn is very important when working with technologies such as well rolling and drilling piles in the casing. ...
#30308
Enteco E 5000 drilling rigs
E5000 Series: Among the main drilling technologies for which the E5000 series was developed, the following technologies can be distinguished: CFA - continuous hollow auger and Soil Displacement – well rolling, drilling with a submersible pneumatic hammer using DTH technology, soil Mixing.
...
...
#30307
Container semi-trailers NovosybARZ 98132A
Technical specifications
Length, mm 12725 ...
Length, mm 12725 ...
#30301
Flatbed semi-trailers and platforms NovosybARZ 2-axle 98131C
Technical specifications
Width of the platform, mm ...
Width of the platform, mm ...
#30304
NovosybARZ 4-axle sorting truck trailers 84342A
Technical specifications
Width of the platform, mm 2550 ...
Width of the platform, mm 2550 ...
#30300
NovosybARZ 951050 dump truck semi-trailers
Width of the platform, mm 2550
Platform length, mm 10000
Loading height, mm 3500..4000 ...
Platform length, mm 10000
Loading height, mm 3500..4000 ...
#30292
NovosybARZ 2-axle dump truck semitrailers 95100C
Technical specifications
Width of the platform, mm ...
Width of the platform, mm ...
#30293
Semi-trailers-logging trucks (semi-trailers-sorting trucks) NovosybARZ 3-axle 98134A
Technical specifications
Width of the platform, mm 2550 ...
Width of the platform, mm 2550 ...
#30298
XCMG XS412 Concrete mixers
The XCMG XS412 concrete mixer truck is a specialized vehicle that performs the function of safe, reliable and efficient transportation of the finished concrete mix from the mixing plant to the construction site. The concrete mixer truck is used in combination with a concrete pump for efficient mechanized construction. The barrel is mounted on a 4-axle XCMG chassis, with a mixing volume of 12 m3....
#30288
XCMG HB37V Concrete Pumps
The XCMG HB37V concrete pump is a specialized construction equipment that ensures the efficient supply of concrete mix from the concrete mixer truck to the installation site. It is a pumping unit mounted on a cargo chassis with a concrete distribution boom. The concrete pump is widely used on a wide variety of construction sites due to its convenience and efficiency. The maximum feed height of this model is 36.3m, with a capacity of 120/170 m3/h. The use of a concrete truck pump increases the speed and quality of construction work.
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
#30289
XCMG GR2205AT Motor Graders
The GR2205AT grader is a powerful and reliable machine that is used to perform various tasks in the construction, agriculture and mining industries. It is used for distributing materials, processing trenches, profiling slopes, loosening and moving soil, as well as for snow removal. The GR2205AT grader is great for harsh environments and can be used in various fields of activity, such as the construction of highways, buildings, water transport facilities, and many others. Due to its compact design and high reliability, this grader has become an indispensable assistant for the defense industry and other industries where high-quality construction equipment is required.
Weight, t 16,5 ...
Weight, t 16,5 ...
#30284
XCMG XE225F Tracked harvesters
The XE225F excavator is designed specifically for efficient solutions in the field of forestry and landscaping. Compact size and good maneuverability make it easier to operate in the cramped conditions of forests and parks.
Operating weight, t 23.2 ...
Operating weight, t 23.2 ...
#30281
XCMG XE27U Crawler Mini Excavators
The XE27U crawler mini excavator is designed to operate in dense urban areas, private sectors, road works and municipal facilities. This excavator model has a mass of 2.88 tons and a bucket volume of 0.06 m3. In addition to turning the tower, the mini excavator can rotate the boom relative to the upper platform. The car is equipped with a zero-overhang cabin, Kubota engine, reversible hydraulic line and rubber tracks. It belongs to the Euro-3 environmental standard.
Working weight, t 2.8 ...
Working weight, t 2.8 ...
#30252
NORSU VR-80 vibrating racks
The NORSU VR-80 gasoline vibrating rack with a reliable HUASHENG 140FA engine allows you to quickly and evenly lay concrete. It is distinguished by its strength, compactness, maneuverability, and low dead weight — 15.4 kg. The ergonomic design ensures an even distribution of vibration over the entire surface of the blade, allowing you to comfortably hold the tool in your hands and maneuver it effortlessly. The support leg on the frame reliably protects the controls from contamination during stopping. The fuel tank capacity in this model is 0.65 liters.
The blades used for this model can be from 1 to 5 m long (in 1 m increments). They are not included in the standard package, they must be ordered separately. ...
The blades used for this model can be from 1 to 5 m long (in 1 m increments). They are not included in the standard package, they must be ordered separately. ...
#30213
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access