On-board KAMAZ vehicle-65117-3010-48 with HORYONG HRS216 CMU (additional supports included, platform 6818 mm)
Model 6590-160121-48
Cummins internal combustion engine ISB6.7 E5 300, GEARBOX ZF 9S1310 TO

Sales from the official dealer of PJSC KAMAZ and PJSC NEFAZ!
Warranty for all equipment. Delivery to the regions!

A brief presentation of our company, as well as other video reviews of special equipment, can be viewed on our YouTube channel (KAMAZ CENTER).

Technical characteristics of the Horyong HRS 216 CMU
Parameter Position Value
Load torque 18 tons.m
Maximum working radius 19.7 m
Maximum working height 22.7 m
Load capacity
1st 3,900 kg/4.6 m
2nd 1,850 kg/7.6 m
3rd 1,100 kg/10.7 m
4th 850 kg/13.7 m
5th 620 kg/16.7 m
6th 470 kg/19.7 m
Boom Type Hexagonal, 6 sections, 3 cylinders, 2 cables
Boom hydraulic cylinder Tilt angle range from -17° to 81°
2 hydraulic cylinders
Winch type cylindrical gear reducer, automatic mechanical brake
cable diameter 10 mm × 120 m
Rotation Type Reducer screw-nut, Hydraulic brake
360 degree rotation range (infinite)
Rotation speed 2.5 rpm
The front supports are hydraulically expandable type
Expansion width 6.1 m
Rear supports Type Hydraulically expandable
Extension width 4.3 m
Hydraulic system Nominal flow rate 70 l/min (1500 rpm)
Nominal pressure 210 bar
Tank capacity 200 l
Crane assembly weight 3368 kg
Rear supports 328 kg

Details about the technical characteristics of the KAMAZ chassis-65117-3010-48 :
Weight parameters, loads
Load capacity, kg 16000
Total weight of the car, kg 24000
- on the front axle 6000
- on the back cart 18000
Engine
Internal combustion engine model KAMAZ 667.511-300 (Cummins ISB6.7 E5 300)
Number and arrangement of cylinders 6, in-line
Environmental class EURO-5
Diesel fuel
Maximum power, hp 292
Working volume, l 6.7
Transmission
Gearbox model ZF KAMA 1310 TO (ZF 9S1310 TO)
Manual transmission type
Number of forward gears - 9, reverse - 1
The cabin
Cabin design Restyling-1
Sleeping place 1 sleeping place
Tilting of the cabin hydraulic lift
UVEOS Preparation for installation
Chassis Characteristics
Double-sided bushing
Fuel tanks, l 500
There is a tank of neutralizing liquid
There is an ICD
There is a MOB
Tires 11.00R20 or 11.00R22.5
The rear suspension is spring-loaded
The presence of a remote control is
Location of the control panel on the right under the frame

By contacting our company, you receive:
1. Equipment from the official dealer of PJSC KAMAZ, PJSC NEFAZ and PJSC Tuymazinsky Concrete Truck Plant
2. Extended warranty
3. Assistance at all stages of equipment selection and delivery
4. Service center for warranty and post-warranty service
5. Our company sells special equipment on the KAMAZ chassis (utility vehicles, cranes, concrete mixers, vacuum and suction machines, hydraulic manipulators, etc.)
6. In the warehouse of KAMAZCENTER-KURGAN LLC, there is always a large assortment of original spare parts, aggregates and components at inexpensive, low prices.
7. Our equipment is represented in all cities of Russia, in particular Moscow, St. Petersburg, Novosibirsk, Yekaterinburg, Nizhny Novgorod, Kazan, Chelyabinsk, Samara, Ufa, Perm, Krasnodar, Naberezhnye Chelny
You can also get acquainted with and buy other models of new cars, trucks, trailers and semi-trailers at our dealership.

Cranes (manipulators)