Sand spreaders FAW J6CA3250, Chelyabinsk

COMBINED ROAD VEHICLE
MK-9534-08 based on FAW J6CA3250 dump truck:
- The volume of the hopper sand spreader is 14 cubic meters (Quick-release)
- OSG-6 front rotary blade
- Communal interbase brush

Warranty for all equipment. Delivery to the regions!
We work with all leasing companies!

You can also get acquainted with and buy other models of new cars, trucks, trailers and semi-trailers at our Dealership.

We work without holidays and weekends. We sell equipment at the best prices

Quick-release sand-throwing equipment installed in the dump truck body: 13.8 cubic meter hopper
Hydraulic lifting of the spreader
COM protection (switching the gearbox into motion with the attachments running)
Front rotary blade OSG6: blade width – 3500 mm, knife type – technical plate
The average sweeping brush ShchO-10 is highly rotating up to 470 rpm, floating mode

Chassis Characteristics
Car model FAW J6
Wheel formula 6x4
The cabin
There is a sleeping place
Platform volume, m3 20 cubic meters
Engine
Engine CA6DM2-39E51
Engine power, hp 390
Maximum torque (n/m) 1900 Nm / 1300 rpm
Power supply system (type) Common rail, Bosch
Electronic control unit (marking), Bosch
Air filter (type, marking) Two-stage, with the first stage of the vortex type (dry)
SCR exhaust and neutralization system with urea, without a particulate filter
Pendant
The front suspension is dependent, spring-loaded, balanced with shock absorbers
Rear balancing suspension
Transmission box
CHECKPOINT FAST
The type of gearbox is Mechanical FAST
Number of steps: 12 forward and 2 backward with synchronizer
Clutch (brand, type) YIDONG F430
Bodywork
Hydraulic Lift JEAHENG Hydraulic lift front arrangement
Weight parameters
Permissible total weight, kg 35100
Chassis load capacity 19850
Tires
Tires 315/80 R 22.5 or 12.00 R 20
Other characteristics
Tank, L 400
Price, including VAT from 8700000
Maximum speed, km/h 90 km/h
Double-circuit Pneumatic brake system with ABS WABCO

By contacting our company, you receive:
1.Equipment from the official dealer of PJSC KAMAZ, PJSC NEFAZ and PJSC Tuymazinsky Concrete Truck Plant
2.Extended warranty
3.Assistance at all stages of equipment selection and delivery
4.Service center for warranty and post-warranty service
5.Our company sells special equipment on the KAMAZ chassis (utility vehicles, cranes, concrete mixers, vacuum and suction machines, hydraulic manipulators, etc.)
6.In the warehouse of KAMAZCENTER-KURGAN LLC, there is always a large assortment of original spare parts, aggregates and components at inexpensive, low prices.
7.Our equipment is represented in all cities of Russia, in particular Moscow, St. Petersburg, Novosibirsk, Yekaterinburg, Nizhny Novgorod, Kazan, Chelyabinsk, Samara, Ufa, Perm, Krasnodar, Naberezhnye Chelny

The body of the sand and salt distributing equipment (the volume of the hopper is 14 cubic meters) is a welded metal structure made of structural steel 09G2S with a thickness of 4mm. The body is reinforced internally with crossbars and braces made of 60x40x3 pipes, and externally with supports made of 6 mm thick sheet steel to prevent deformation. Internal reinforcements - crossbars and braces eliminate the hanging of anti-icing materials (sand and salt mixture) on the walls of the body.

The conveyor type is a scraper type (with high–rigidity scrapers). Two roller sleeve chains with a breaking force of 20.5t.
The reverse branch of the conveyor passes through the sand-salt mixture, which allows for a visual inspection of the condition of the chain regardless of the presence of the sand-salt mixture in the body.
The bottom of the hopper is made of 5mm thick steel
Chain guides – 20x20mm square

The RGC hydraulic distributor with manual duplication of sections, control valves and the control unit of the hydraulic control system of the equipment are located behind the driver's cabin in a dust and moisture proof box (IP54-60), which eliminates the ingress of dirt, moisture and other aggressive materials, which increases the service life of the equipment.

Equipment management system
The attachments are controlled from the driver's cabin via the control panel.
The control panel for the attachment system is located in the cabin, which allows you to adjust the speed of the conveyor, the speed of rotation of the spreading disc, and the lifting of the spreader

Folding spreading device
Lifting the mechanism of the spreading equipment using a hydraulic cylinder from the driver's cabin.
The processed strip is 2-12 m,
The density of distribution by deicing materials is 50-400 g/m2

OSG-6 front rotary blade
The dump is designed for patrol cleaning of freshly fallen snow or cleaning the road surface, previously treated with anti-icing materials.
Weight: 600 kg.
Blade width: 3500mm.
Height: 1160 mm.
Operating speed: no more than 40 km/h.
Working angle of rotation: 37 degrees.
Retroreflective hangers – available, 2 pcs.
Obstacle collision protection: floating suspension

The average sweeping brush
The total width of the brush on the pile is at least 2.84 m.,
The width of the processed strip is at least 2.3 m.,
Pile diameter: 550 mm.
Pile material: polypropylene.
Weight: 150 kg.
Distance from the road surface to the brush in
the transport position: 160 mm.
Rotation speed - no more than 470 rpm
Operating speed - no more than 40 km/h
The exclusion of debris and aggressive materials from the vehicle's power units is ensured
Warranty for all equipment. Delivery to the regions!
We work with all leasing companies!