On-board KAMAZ vehicle-65117-3010-48 with PALFINGER INMAN IT150 CMU (without additional rear supports, 6818 mm platform)
Model 6590-110921-48
Cummins internal combustion engine ISB6.7 E5 300, GEARBOX ZF 9S1310 TO

Sales from the official dealer of PJSC KAMAZ and PJSC NEFAZ!
Warranty for all equipment. Delivery to the regions!

A brief presentation of our company, as well as other video reviews of special equipment, can be viewed on our YouTube channel (KAMAZ CENTER).

TECHNICAL CHARACTERISTICS OF THE CRANE MANIPULATOR UNIT:
«PALFINGER INMAN IT 150»
Cable control, control from the upper seat (during operation),
control from the ground (when mounted on outriggers)
Load moment, t·m 15.0
Load capacity, kg:
- maximum 7050
- at a maximum flight of 300
Departure, m:
- maximum 19.0
- minimum 2.2
Curb weight
of an automobile manipulator crane, kg 12730
- on the front axle, kg 5270
- on the rear trolley, kg 7460
The largest mass of the transported cargo, kg
10350
Technically permissible mass
of an automobile manipulator crane, kg 23150
- on the front axle, kg 5150
- on the rear trolley, kg 18000
Technically permissible mass of towed trailer, kg
14000
Technically permissible weight of the road train, kg
37150
Overall dimensions, mm:
Length 10350
Width 2550
Height with tires 11.00 R22,5 3630
Height with tires 11.00 R20 3645
Side platform, without frame and awning, rear and
side sides – metal, folding,
wooden flooring
Internal dimensions, mm
Length 6648
Width 2470
Height 730

Details about the technical characteristics of the KAMAZ chassis-65117-3010-48 :
Weight parameters, loads
Load capacity, kg 16000
Total weight of the car, kg 24000
- on the front axle 6000
- on the back cart 18000
Engine
Internal combustion engine model KAMAZ 667.511-300 (Cummins ISB6.7 E5 300)
Number and arrangement of cylinders 6, in-line
Environmental class EURO-5
Diesel fuel
Maximum power, hp 292
Working volume, l 6.7
Transmission
Gearbox model ZF KAMA 1310 TO (ZF 9S1310 TO)
Manual transmission type
Number of forward gears - 9, reverse - 1
The cabin
Cabin design Restyling-1
Sleeping place 1 sleeping place
Tilting of the cabin hydraulic lift
UVEOS Preparation for installation
Chassis Characteristics
Double-sided bushing
Fuel tanks, l 500
There is a tank of neutralizing liquid
There is an ICD
There is a MOB
Tires 11.00R20 or 11.00R22.5
The rear suspension is spring-loaded
The availability of a remote control is
Location of the control panel on the right under the frame

By contacting our company, you receive:
1. Equipment from the official dealer of PJSC KAMAZ, PJSC NEFAZ and PJSC Tuymazinsky Concrete Truck Plant
2. Extended warranty
3. Assistance at all stages of equipment selection and delivery
4. Service center for warranty and post-warranty service
5. Our company sells special equipment on the KAMAZ chassis (utility vehicles, cranes, concrete mixers, vacuum and suction machines, hydraulic manipulators, etc.)
6. In the warehouse of KAMAZCENTER-KURGAN LLC, there is always a large assortment of original spare parts, aggregates and components at inexpensive, low prices.
7. Our equipment is represented in all cities of Russia, in particular Moscow, St. Petersburg, Novosibirsk, Yekaterinburg, Nizhny Novgorod, Kazan, Chelyabinsk, Samara, Ufa, Perm, Krasnodar, Naberezhnye Chelny
You can also get acquainted with and buy other models of new cars, trucks, trailers and semi-trailers at our dealership.
Sales from the official dealer of PJSC KAMAZ and PJSC NEFAZ!
Warranty for all equipment. Delivery to the regions!

Cranes (manipulators)