Universal road vehicle ADU 14.0 based on a KAMAZ 6595 (K5) dump truck, Chelyabinsk

Universal road vehicle ADU 14.0 based on the KAMAZ 6595 dump truck
The sand spreader
Volume of the dry product container,m3 9
The number of vertical stiffeners on one wall of the hopper is 5
The stiffeners are angular, bent
Hopper wall thickness, mm 4
The sand intake tray has an increased cross-section for working with a low-quality mixture.
The spreader disc is made of steel (6mm), 8 blades - angle 45
Spreader disc drive Hydraulic motor, operating V 80 l/min
Hydraulic distributor MVA 5/5S with electro-pneumatic control and manual duplication
The sleeve is a high-pressure hydraulic sleeve with a metal braid
The method of feeding the material is a 530 mm wide chain conveyor
Number of conveyor chains, pcs. 2
Width of the sand collector tray, mm 600
Conveyor chain type Collapsible traction chain with fixed rollers R2-80-290, removed from the PGM loading area
The conveyor is hydraulically driven from the base vehicle by means of a hydraulic pump
Conveyor drive Gear RT-500 with hydraulic motor drive working V 160 l/min
The width of the sprinkling Is From 2-10 m
Control Panel in the cabin, W/C monitor
Control the equipment using a joystick
Hydraulic lifting of the spreader tray to the transport position
LED signs In the package
Anti-corrosion treatment of the bunker Zinc-containing soil

City dump
Overall width of the blade wing, mm 3000
Overall blade height, mm 1260
Working height of the blade, mm 1093
Blade wing metal thickness, mm3
Snowplow width, at least, mm 2600
Rear stiffeners, 6 mm thick plate, 10 pcs
. Width of the rubber knife, mm. 250
Length of the rubber knife, mm 3000
Working angle of the transverse position to the left/right, not less than, degrees From minus 30 to plus 30
Additional protection to prevent arbitrary lowering of the blade of double-acting hydraulic locks 1/2
Copying of the roadway in the vertical and horizontal planes
The brush is interbase
Cylindrical with polypropylene pile
Initial diameter, mm 550
Brush shaft diameter, mm, not more than 120
Number of brush discs 62
Lifting height from the ground, not less than 80 mm.
Installation angle, deg. 30 +/- 5
Weight, kg 260
Overall dimensions, mm.:
length 3000
width 900
height 550
Working width, m 2.3 – 2.6
Transport speed, km/h 60
Technological speed, km/h 20
Lifting/releasing drive Hydraulic drive
Sales from the official dealer of PJSC KAMAZ and PJSC NEFAZ! Delivery to the regions! We cooperate with all leasing and credit organizations.