KDM (ADU-10.0 (SX3258 ) ST.070) on a dump truck SHACMAN SX32586V384 Chelyabinsk

KDM (ADU-10.0 (SX3258 ) ST.070) on a SHACMAN SX32586V384 dump truck
Wheel formula: 6x4
Engine Name: WP12.430E50
Cabin Model: X3000
Stamp: 12JS180TA
Model: SX32586V384
The sand spreader
Volume of the dry product container, m3 12
Hopper wall thickness, mm 4
The height of the screening grate, 350 mm
Coloring
High-quality paint coatings. Primer-enamel
PRODEKOR 1203 RAL 2004(orange), PRODEKOR 1102 primer(grey), Enamel primer
PRODEKOR 1202 RAL 9005(black)
Sand collector tray
It has an increased cross-section for
working with a low-quality mixture and consists of two parts. Spreader disc
It is made of steel (5mm), 8 blades (4mm)
located at an angle of 45 degrees from
the shaft
MS-80/MGP-80 spreader disc drive (or analog)
The method of feeding the material is a 530 mm wide chain conveyor
Number of conveyor chains, pcs 2
The width of the sand receiver tray, mm 600
The type of conveyor chain is Sleeve-roller
Conveyor drive
Hydraulic, from the base
vehicle unit, by means of
a hydraulic pump
Conveyor drive
Berma RT500 gearbox (or equivalent)
powered by MR 125/160 hydraulic motor
The density of the sand–and-salt mixture is 10 - 500 g/sq.m.
Rear protected flashing light
Equipment Control Joystick
City dump
Overall width of the blade wing, mm 3000
Overall blade height, mm 1000
Blade wing working height, mm 900
Snowplow width, at least, mm 2600
Longitudinal stiffeners, pcs longitudinal tube 60x40x3.5
Rear stiffeners, 6 mm thick plate, pcs 6
Width of the rubber knife, mm 250
The length of the rubber knife is 3000
Thickness of the rubber knife, mm 40
The number of bolts securing the rubber knife is 26
Number of hydraulic cylinders for turning 2
Protection against snow falling on the front window
of the base vehicle cabin
It is provided by the original
design of the blade body + a rubber apron
Device for fixing the blade in the transport position
One-way hydraulic lock
Ensuring smooth operation of hydraulic cylinders Throttle
Mounting plate on the car. 16 mm thick, universal, allows you to install front
urban, high-speed dumps, brushes of various modifications.
The brush is interbase
Cylindrical with polypropylene pile
Initial diameter, mm 550
Brush shaft diameter, mm, not more than 120
Number of brush discs 62
Lifting height, mm. at least 80
Installation angle, deg. 30 +/- 5
Weight, kg 440
Overall dimensions, mm
length 3000
width 600
height 550
Working width, m 2.3 - 2.6
Transport speed, km/h 60
Technological speed, km/h 20
Hydraulic drive
MS 200 hydraulic motor (or equivalent)
An oil cooler is installed
Lifting lowering by hydraulic cylinder
Sales from the official dealer of PJSC KAMAZ and PJSC NEFAZ! Delivery to the regions! We cooperate with all leasing and credit organizations.