Characteristic Value
The maximum load capacity of the midi, t 16.0
Maximum load torque, kNm (tm) 588.6 (60.0)
Maximum lifting height, m 8,7-19,4
Lifting height at maximum reach, m3
The maximum lowering depth when working with a load equal to 50% of the load capacity, with the main boom and the maximum storage capacity, m 11.0
Reach at maximum load capacity, m 3.6
Departure, maximum, m
— a) "design" (without load) 6.95
— b) "working" (with load on the hook) 7.0
Minimum departure, m 2.6
The maximum weight of the load from which the boom can be telescoped, t: 4.0
Base, m 4.0
Track, m:
— front wheels 2.05
— rear wheels 2.05
Outrigger base, m 4.7
Distance between outriggers, m: 5.4
Rear dimension, m 2.75
Turning radius, m 12.0
Overall dimensions of the crane (length x width x height), m 10.1x2.55x3.74
Movement speeds:
— transport crane (under its own power), 60 km/h
— towed transport crane, 40 km/h
— single-track crane transport (under its own power), 40 km/h
The speed of the boom section telescoping mechanism (extension-retraction of the boom section), m/s (m/min), not more than 0.25 (15)
Turning mechanism speed (rotation speed), rad/s (rpm):
— lowest, not more than 0.042 (0.4)
— highest, with load, not less than 0.262 (2.5)
— highest with single file and load, not more than 0.078 (0.75)
Angle of rotation, rad (°) 6.28 (360)
Weight of the crane and its main parts, t:
— the structural weight of the crane in the transport position is 19.32 (complete with a planetary winch)
— the weight of the counterweight 1 and 3
— the weight of the boom is 3.55
— the weight of the crane installation is 10.95
— the weight of the goose is 0.35
Fuel consumption, l/h:
— in crane mode (depending on the loading mode) 7-10
— in transport mode in accordance with the RE for the base vehicle
CS-35719-7-02- high throughput

CS Car Crane-35719-7-02 With a lifting capacity of 16 tons, it is mounted on a three-axle chassis of a KamAZ 43118 all-terrain vehicle.

The crane is mounted on a KAMAZ chassis, the most advanced chassis in Russia, which guarantees that it can be operated in conditions with poor road surfaces, in hard—to-reach places and in conditions of complete off-road conditions. A powerful chassis engine, single—pitch wide-profile tires, a tire pumping system that allows you to change the pressure in them on the move depending on the road surface, the presence of axle and wheel locks on the chassis - all this makes the crane indispensable in hard-to-reach places with poor road conditions, where conditions of complete off-road are the norm of life. The crane can operate in a 360 degree zone.

The crane in the basic configuration is designed for construction and installation work at dispersed facilities when working with conventional loads. At the request of the customer, the crane can be supplied with a complete set for handling DANGEROUS goods.

Actuator drive

Truck cranes