XCMG XCT25L5_SR Four-wheel drive truck crane

The machine has a maximum load capacity of 25 tons. It is equipped with a 5-section U-shaped telescopic boom made of high-strength steel. The boom has a reach in the range from 10 to 41 m. This crane model uses a 6-cylinder SDECSC9DF340.Q5 diesel engine that meets high standards and environmental safety standards. This power plant model is equipped with a turbocharging system.

With the help of a dependent spring balancing suspension, the operator's convenience is created when moving the crane along public roads. The ABC system was used to form a two-circuit, pneumatic braking system acting simultaneously on all wheels. A complete package of electrical equipment is used on the crane.

Warranty: 24 months without limitation of m/h

Specifications:

Maximum load capacity, t 25
Maximum permissible weight, t 30
Travel speed, km/h 80
Surmountable climb 45 °
Boom lifting time, from 35
Time of full extension of the boom, from 95
Maximum rotation speed, 2.5 rpm
The maximum lifting speed of the main winch, m/min 125
The maximum lifting speed of the auxiliary winch, m/min 125
Joystick Control
Number of seats in the cabin, pcs 3
Shangchai Engine Model SC9DF340.Q5
Output power, kW/RPM 251/1900
Fuel consumption per 100 kilometers, liters less than 35
Front axle load, t 9
Load on the rear axle, t 18
Surmountable climb 45 °
Time of synchronous extension/retraction of the outrigger beam, from 20/25

Equipment:

Shangchai Engine
Comfort Climate control
Hook block 25 t
K-shaped outriggers
Counterweight 5.5 t
Shaanxi 9-speed transmission
Full Bridge drive
Additional equipment Spare wheel, ABS, GLONASS
Optional Anemometer, independent heater, hook - 3 t

The working area:

Length of the main boom, m 10.5
Length of the fully extended boom, m 41
Length of fully extended boom + jib, m 49.3
Angle of inclination of the jib, ° 0,15,30
Longitudinal distance of outriggers, m 6
Lateral distance of outriggers, m 6.4
Minimum nominal reach, m3

External dimensions:

Total length, mm 12097
Overall width, mm 2550
Total height, mm 3650
Minimum turning diameter, m 22
Minimum ground clearance, mm 351