Lifting height of the platform, m 12.0
Height of the working area, m 14.0
Load
capacity (with non-movable/sliding, working platform), kg 450/360
Lifting capacity of the sliding section, kg 150
Dimensions:
-length, m
-width, m
-height/with railings removed (folded), m —
2.74
1.20
2.61/2.01
Reference contour
-width, m
-length, m —
1.834
2.280
Front/rear wheel track, mm 540/810
Wheelbase, m 1.860
Maximum transport speed, no more than 3 km/h
Weight, kg 1500
Ground clearance, 0.95 mm
The overcome longitudinal slope, not less than 30 %
Size of the working platform:
-length/with sliding section, m
-width, m
-height, m —
2.30/3.25
1.200
1.230
The greatest slope of the working area is longitudinal/ transverse, no more than 3/3 °
The operation of non-self-propelled scissor lifts is carried out from an electric network of 220v or 380v. The equipment is moved manually or using an optional drive. The cost of renting non-self-propelled scissor lifts is approximately equal to the cost of renting a tura tower (scaffolding), but compared to a tour you will not need to pull the load manually and constantly climb up, which saves a lot of time and effort, and consequently reduces the cost of work performed. Such lifts are used for maintenance and installation of engineering networks inside buildings, warehouses and industrial premises, where it is not necessary to frequently move the lift over long distances.Such lifts pass through any door of a building or warehouse.This type of scissor lift is suitable for various indoor altitude tasks.

Scissor lifts