Trailers and semi-trailers TONAR SDP4-89, Krasnodar

Dimensions:
Length (internal dimensions), mm

14 100

Width (internal dimensions), mm

2 480

Height (internal dimensions), mm

2 550

Height of the coupling device, mm

1 150

Weight:
The weight of the loaded semi-trailer, not more than, kg

9 700

Technically permissible maximum weight, kg

37 500

Load on the SSU, kg

10 500

Load on the wheeled trolley, kg

20 250+6 750

Axes "Tonar":
Wheel axles

Tonar

Tires

Tubeless 385/65R 22.5

Pendant

dependent, on longitudinal elastic levers with pneumatic elastic elements and telescopic hydraulic shock absorbers

Lifting axle

the front

Other features
Back wall

aluminum swing gates

Side walls

made of aluminum profile

Paul

Cargo Floor sliding floor system

Body volume, cubic meters

89

Support device

for 24 tons

Configuration options
Model
95894

SSU
1150


Semi-trailer type with sliding floors

Body
aluminum body

Volume
89 cubic meters

Number of axes
3

The type
of bushing is single-pitched

Pendant
lever type; Wabco pneumatic system

Awning
with mechanical drive, included in the basic package

The braking system
TEBS_E

Additional options
installation of unloading hatches
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body.