Belarus wheeled tractors BELARUS-3522, Krasnodar

Engine
Type diesel with Common Rail fuel injection system, turbocharged and intercooler
Model C9CPXL08.8ESK (Caterpillar)
Engine power, kW (hp) 268 (364)
Rated speed of rotation of the crankshaft, rpm 2100
Number of cylinders, pcs. 6
Working volume, l 8,8
Maximum torque, N•m 1694
Specific fuel consumption at operating power, g/kWh 243
Torque reserve ratio, % 39
Fuel tank capacity, L 650
Transmission
The clutch is dry, two-disc
The gearbox is hydromechanical with friction clutches
Electrohydraulic gear shifting
Number of gears: forward/backward 36/24 with speed suppressor
Movement speed: forward/backward 0.34-40/0.43-20.8
PTO rear: independent, two-speed, with hydromechanical control system
independent I, rpm 1000
independent II, rpm 1450
Max. power at the front PTO, kW (hp) 58 (79)
Max. power at the rear PTO, kW (hp) 219 (298)
PTO hydraulic control
Differential lock hydraulic
Hydraulic suspension system
A universal hydraulic control system for working bodies of agricultural implements with a variable-capacity pump, an electronically controlled distributor and the ability to program the sequence of on/off sections, flow rate, and operating time by reading signals from two sensors. With power, positional and mixed methods of regulating the depth of tillage, 4 pairs of independent terminals.
Maximum load capacity on the suspension axis, kg: PNU/ZN 10000/5000
Maximum pressure, 20 MPa
Pump capacity, l/min. 0-160
Hydraulic system capacity, l 100
Dimensions and weight
Total length (with PNU ballast), mm 6500
Width, mm 2740
Cabin height, mm 3350
Tractor base, mm 3000
Track, mm:
on the front wheels 2000, 2150
on the rear wheels 2130-2220, 2316-2636
Agrotechnical clearance, 450 mm
The smallest turning radius, m 6.5
Operating weight, kg 12300
Tires:
front wheels 600/65R34
rear wheels 710/70R42
4x4 wheel formula
Basic equipment
A set for doubling the rear wheels, a running damper, an air conditioner, a front attachment device (PNU), a front power take-off shaft (PTO).

Model Features

Hydromechanical transmission with electrohydraulic control.
The tractor is designed to perform energy-intensive agricultural work in traction and traction-drive modes as part of wide-range and combined units, including for echelon loading, basic and pre-sowing tillage, sowing grain and other crops, foraging, harvesting root crops, grain and industrial crops; for performing transport work, stationary work, in construction and industry. Model: Caterpillar C9 Power, kW (hp): 268 (364)