The main characteristics of the crane manipulator car
KMA-150-9 "GALICHANIN"
CRANE MODE
Load moment, t*m 15.0
Number of sections, pcs. 6
Lowering of the boom below the horizon, ° 15
Boom length, m 4,9 - 19,0
Load capacity, t (gross):
- maximum 7.0
- at maximum departure 0.2
Departure, m:
- maximum (without additional equipment); 19.0
- minimum; 1.2
Maximum lifting height
(hook suspension), m 20.9
Maximum lowering depth, not less than 20.9 m
Column rotation angle 360 °,
without rotation angle limitation
Max. reach of the front telescopic supports, m. 5.65
Max. reach of the rear telescopic supports, m. 4.57
Load capacity limiter availability
The service area restriction system. availability
Operating hours counter availability
The presence of sound and light warning alarms:
- sound
- light (indicators)
intermittent beep
green, red
Boom angle limiter availability
The searchlight on the boom is available
The emergency stop button is available
Emergency lowering mechanism (mini hydroelectric power station) availability
A device that blocks the lifting of supports, when operating a crane manipulator with a working platform, the presence of
A device that blocks a crane manipulator from a work platform if the chassis is not mounted on supports. availability
Oil cooler availability
Control location
when working with the main boom from a seat on a column or
from a portable control panel
when mounted on outriggers, two control panels are located on the support frame on different sides of the cabinet
2 drawers in the rear of the KMA for storage and transportation of support pads.
Characteristics of the FAW J6 chassis (6x6)
The wheel formula is 6x6
Wheelbase, mm. 5200
A cabin with a sleeping place
FAW engine, CA6DM2-42E51
Maximum useful power, 420 hp
Fuel tank 400 L
On-board platform
External dimensions, mm 8000 x 2550
Side height, mm 730
There are also modifications available:
- with drilling equipment
- with drilling equipment and a certified cradle.

Truck-mounted cranes