Scope of application multifunctional
country of manufacture South Korea
warranty, month 36
length, mm 2770
width, mm 1121
height, mm 1970
weight, kg 1025
front tire size 7-12
rear tire size 11.2 - 16
ground clearance, 330 mm
max. speed (forward/backward), km/h 17.34 /6.73
The technique is without problems
The warranty for the tractor is 1,500 operating hours or 3 years after purchase.

Buyers can be sure that in case of problems they will be able to contact a certified service center in their region. KIOTI service centers are located in all regions of Russia where sales of mini tractors are conducted. They have international standards of service and employ employees who have completed mandatory advanced training courses and trainings.

The technique is without problems
Engine
The KIOTI CK2810 mini tractor is equipped with a modern powerful Daedong 3A139LWB engine. It is produced under license from the Japanese manufacturer KUBOTA at a facility in South Korea.

This is a 28 hp engine with a volume of 1.39 liters, powered by diesel fuel. The 3-cylinder liquid-cooled engine allows the mini tractor to easily handle heavy agricultural work, consuming only 2.5 liters per hour. Thus, the fuel tank with a volume of 25 liters will ensure continuous operation of the machine for 10 hours.

Engine
Hydraulic system
The hydraulic system with a capacity of 42.9 liters/min provides a wide working capacity of the minitractor. The hydraulics have an operating pressure of 157 bar, allowing you to install a variety of attachments on the machine and maintain its stable operation.

The rear three-point tractor hitch has a load capacity of 739 kg with a tractor weight of 1025 kg. When working with a front loader, its movement time when lifting the load is 2.5 seconds, and when lowering it is 1.5 seconds.

Hydraulic system
Transmission
The SK2810 is equipped with a manual transmission with a pair of synchronized reverse gears and a total of 6 + 2 speeds. The synchronized reverse makes it easier to work with the loader and perform many utility tasks. A mechanical checkpoint simplifies heavy work, such as plowing the land.

Since KIOTI independently manufactures engines for its mini tractors, this allows their gearbox and motor to interact most effectively. The sophisticated design of the power plant and transmission allows the tractor to perform the most difficult tasks without the risk of damage to machinery.

Transmission
Increased cross-country ability
The 340 mm high ground clearance (30 mm higher than that of the CK22) ensures convenient operation in the field, forest, greenhouse, and construction site. The aggressive tire tread makes it easy and reliable to control the tractor when driving on snow and ice, while working on slippery and uneven surfaces.

Increased cross-country ability
Dimensions
The SK2810 is one of the most compact KIOTI mini tractors. Thanks to the use of the CK22 transmission housing, it has dimensions of 2.8×1.25×2.3 m (length, width, height with safety arc) and a turning radius of 2.7 m. In a complex with a significant weight of 1025 kg and a relatively high engine power of 28 hp, the tractor successfully operates in greenhouses, yards, warehouses, parking lots, vineyards and other cramped conditions.

Dimensions
Three-point coupling
The coupling of category 1 (global standard) does not limit the choice of attachments for the mini tractor. Any equipment of this category can be installed, its position can be adjusted according to the angle of inclination in the longitudinal and transverse directions and the width of the tractor to the right or left. A joystick is provided to control the attachments.

Three-point coupling
Power take-off shaft
To work with energy-intensive attachments, the minitractor has a power take-off shaft with a standard rotation speed of 540 rpm and a power of 24.2 hp.

The PTO transmits the rotation of the engine to work with harvesting equipment, harrow, mower, seeder, active trailer, chopper, chopping machine and other equipment for tillage and snow removal.

Power take-off shaft
Operator's location
KIOTI cares not only about the reliability of its equipment, but also about the comfort of the operator, which is very important in the case of professional use of a mini tractor.

The logical and convenient arrangement of the control levers makes it easy to reach each of them, while the hydraulic levers are positioned so as not to accidentally turn on the attachments. An armchair with an adjustable shock absorber for construction machinery reduces vibration transmission to the operator's body.

Operator's location
Cabin with heating
Optionally, you can equip the KIOTI CK2810 mini tractor with a cabin equipped with a heating system. The seals make the cabin airtight, so that even in frosts below -30 ° C it is possible to work comfortably in it. In the summer heat, 40% of its glazing opens for ventilation.

Cabin with heating

Mini tractors