Scope of application multifunctional
country of manufacture South Korea
warranty, month 36
length, mm 3742
width, mm 1665
height, mm 2429
weight, kg 1988
front tire size 9.5 - 16
Rear tire size 13.6 - 26
ground clearance, mm 376
max. speed (forward/backward), km/hr 30/30
The technique is without problems
The warranty for the tractor is 1,500 operating hours or 3 years after purchase.

Buyers can be sure that in case of problems they will be able to contact a certified service center in their region. KIOTI service centers are located in all regions of Russia where sales of mini tractors are conducted. They have international standards of service and employ employees who have completed mandatory advanced training courses and trainings.

The technique is without problems
Engine
The tractor is equipped with a tested diesel engine with a capacity of 50 hp, which reaches its maximum torque at 1,700 rpm, while fuel consumption is no more than 4.9 liters / hour of operation.

This configuration allows you to use all the features of a universal tractor with various attachments, while having low operating costs when performing energy-intensive tasks.

Engine
Hydrostatic transmission
KIOTI uses KANZAKI's HST hydrostatic transmission to simplify the operation of the NX5020 CH tractor.

Stepless shifting with 2 downshifts makes it possible to simultaneously control the speed and direction of movement with just two pedals.

The reliable transmission design eliminates the risk of clutch wear even when the tractor's operating modes are constantly changing. The controls are intuitive and easy for beginners.

Hydrostatic transmission
Repair and maintenance without problems
The design of the tractor is designed in such a way as to reduce the cost of repairs and increase the reliability of machinery.

The entire contents of the engine compartment can be replaced and adjusted by removing the side panels and lifting the hood.

The hood of the new design leans back, which simplifies the replacement of filters, oil and antifreeze filling for the owner, and also speeds up the process, which means that it reduces the cost of authorized service centers.

Repair and maintenance without problems
Increased cross-country ability
The tractor has a high ground clearance (336 mm) and a large front wheel size (9.5−16), so it is able to perform work on uneven surfaces and in conditions of difficult terrain of other types of equipment, for example, in agriculture or when clearing roads after heavy snowfall.

Increased cross-country ability
Maneuverability and load capacity
With an engine power of 50 hp, the tractor is only 1.66 m wide, 3.55 m long, and 2.4 m high. With such dimensions, the turning radius does not exceed 3 m, which makes it possible to perform all types of communal and agricultural work even in conditions of limited space.

The load capacity of the front loader, optionally installed on the KIOTI NX5020 CH, is 1.06 tons. With its help, the load can be lifted to a height of 2.8 m, and this makes it possible to use equipment for cleaning and loading snow, earth, sand, and gravel into a container or truck body.

Maneuverability and load capacity
Electro-hydraulic connection of all-wheel drive
On the KIOTI NX5020 CH tractor, the all-wheel drive is connected electronically by pressing a button. This connection allows you to save the clutch and eliminate breakdowns due to the careless operation of the tractor driver.

Electro-hydraulic connection of all-wheel drive
Hydraulic system
The tractor is equipped with a high-performance hydraulic system of 67.6 liters/min with independent control of the rear and front hydraulics.

This capacity makes it possible to choose from a wide range of attachments, and they will work quickly, stably and efficiently: from excavators and cranes to pallet forks and grader knives.

Hydraulic system
Three-point coupling
The category 1 three-point coupling has a quick-release mechanism, with which the operator can attach or detach any attachments in a matter of seconds, and the longitudinal and transverse rods allow flexible adjustment of the equipment to meet the conditions of the tasks.

Three-point coupling
Adjusting the hitch position
The system of power adjustment of the coupling position using levers is convenient when working with a plow in conditions of changing density and relief of the cultivated soil.

Without leaving the cab, the operator has the ability to raise or lower the hitch, controlling the plowing process without stopping the tractor.

Adjusting the hitch position
Cabin with heating and air conditioning
A cabin with heating and air conditioning, which is included in the standard equipment of the tractor, provides comfortable conditions and safety for the operator at any time of the year.

Panoramic glazing provides excellent visibility, the functional arrangement of the levers and dashboard elements simplifies operation, reliable seals allow you to work comfortably in frosts up to -30 ° C. Ventilation is performed by opening up to 50% of the cabin glazing.

Cabin with heating and air conditioning

Mini tractors