Your city — Москва?
Sale cranes in Москве
Found 235 sales listings
基于BT10M20t推土机的TENEL集团铺管机，莫斯科
Basic tractor BT10MB
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14960
TENEL Group pipe laying machines based on the BT10M 20t bulldozer, Moscow
Basic tractor BT10MB
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14958
TENEL Group pipe laying machines based on BT10M bulldozer, 12t, Moscow
Basic tractor BT-10M
Track width, mm 500
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 500
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14955
莫斯科XCMGXCT30S汽车起重机
Power: 340 hp (250 kW)
Boom length: 43.6 m
Lifting capacity: 55 t
Boom length: 43.6 m
Lifting capacity: 55 t
#13775
XCMG XCT30S Truck cranes, Moscow
Power: 341 hp (251 kW)
Boom length: 42 m
Lifting capacity: 30 t
Boom length: 42 m
Lifting capacity: 30 t
#13774
莫斯科XCMGRP705沥青摊铺机
Power: 341 hp (251 kW)
Boom length: 42 m
Load capacity: 25 t
Boom length: 42 m
Load capacity: 25 t
#13772
KLINTSY cranes KS-55713-5K-4V, Moscow
Truck crane 25t 33-meter Klintsy KS-55713-5K-4V on Kamaz 43118. 6x6 chassis with a lifting capacity of 7 tons, boom reach of 33.6 meters, Euro 5,300 hp Bosch fuel system.
#4392
KLINTSY cranes KS-55713-5K-4V, Moscow
Truck crane 25t 33-meter Klintsy KS-55713-5K-4V on Kamaz 43118. 6x6 chassis with a lifting capacity of 7 tons, boom reach of 33.6 meters, Euro 5,300 hp fuel system Bosch.
#4391
TEREX COMEDIL CTT 141 A-6 TS tower cranes, Moscow
Method of movement: stationary
Terex Comedil CTT 141/A-6 TS16 Tower Crane
Excellent technical condition ...
Terex Comedil CTT 141/A-6 TS16 Tower Crane
Excellent technical condition ...
#1995
Potain tower cranes, Moscow
Method of movement: stationary
Construction: quick-to-assemble
For sale is a Potain IGO T70A 2013 quick-mount tower crane with operating time. Main technical specifications: ...
Construction: quick-to-assemble
For sale is a Potain IGO T70A 2013 quick-mount tower crane with operating time. Main technical specifications: ...
#1994
GIRAFFE tower cranes, Moscow
Method of movement: mobile
Undercarriage: rail
Construction: bottom-turning ...
Undercarriage: rail
Construction: bottom-turning ...
#1993
Potain tower cranes, Moscow
Method of movement: stationary
Construction: headless
A FRESH POTAIN MCT 188 J8 ON THE L68B3 TOWER ...
Construction: headless
A FRESH POTAIN MCT 188 J8 ON THE L68B3 TOWER ...
#1992
Huba Tm6016-8 QTZp125 Tower Cranes
Huba Tm6016-8 QTZp125 Tower Crane
Specifications: ...
Specifications: ...
#30144
GEARSEN TL20238 mini cranes
The GEARSEN TL hydraulic crane is an autonomous folding (folding not only the upper part, but also the lower) mobile device designed for lifting, lowering and moving cargo over short distances. It is most often used in warehouses, workshops, car service stations and other places where it is difficult to place a stationary crane. The crane has a boom that easily allows you to transport a particular part or unit. The boom has several departure positions, which makes it possible to better adapt the crane to perform specific tasks. Despite its compactness and mobility, the model has an impressive load capacity of 2000 kg. The hydraulic system is operated manually.
Features and benefits: ...
Features and benefits: ...
#30215
Короткобазные автокраны XCMG XCR30_S
Короткобазный автокран XCMG XCR30_S – самый маленький кран в линейке самоходных. Обладает грузоподъемностью 30 т и максимальной длиной стрелы с гуськом до 42 м. Может использоваться как при погрузочно-разгрузочных, так и при строительно-монтажных работах.
Макс. грузоподъемность, т 30 ...
Макс. грузоподъемность, т 30 ...
#30257
XCMG XCA60_S all-terrain cranes
XCMG XCA60_S all–terrain truck crane is a high-performance construction equipment for loading and unloading operations of any complexity. Due to the all-wheel drive mechanism, the chassis provides good maneuverability over difficult terrain and off-road terrain, and is suitable for working on a mountain slope. The crane has a maximum lifting capacity of 60 tons and a fully extended boom length of 64 m. Several driving modes in four different types of operating conditions – urban, rural, highway and off-road, allow you to set the appropriate mode.
Max. load capacity, t 60 ...
Max. load capacity, t 60 ...
#30258
Liugong LTC550L5 Truck Cranes
The LiuGong LTC550L5 truck crane is a safe, reliable and easy-to-maintain machine with a 45 m U-shaped five-section boom and a maximum lifting height of 61 m.
Max. lifting capacity 55 tons ...
Max. lifting capacity 55 tons ...
#30432
Liugong LTC750L5 Truck Cranes
The LiuGong LTC750L5 truck crane is a versatile machine for handling loads.
Max. load capacity 75 tons ...
Max. load capacity 75 tons ...
#30433
Liugong JHT6013N-6 Tower Cranes
The JHT6013N-6 tower crane can lift loads up to 6 tons with a maximum boom reach of 60 m, as well as with a maximum mast height of up to 198 m.
The maximum boom length is 60 m ...
The maximum boom length is 60 m ...
#30437
BHT self-propelled lifts with a lifting capacity of 25-140 tons
Specifications:
4 wheels ...
4 wheels ...
#30734
JC cantilever cranes
Cantilever cranes are used for lifting boats, yachts and other small vessels in yacht ports, marinas, yacht clubs and other enterprises. The use of such ship-lifting equipment is optimal in conditions of a shortage of space near the water, when it is difficult to place a full-fledged slip or dock. The lifting capacity of the crane can range from 5 to 80 tons.
A cantilever crane for lifting boats and yachts is a steel column mounted on a mooring structure or embankment, in the upper part of which there is a boom capable of 360° rotation. The boom reach, the height of lifting and lowering the slings below the zero mark are determined based on the customer's request.
Such a crane can have 1 or 4 lifting points. Each lifting point is equipped with a winch. The standard winches are electrically driven, and hydraulic winches can be installed on request. ...
A cantilever crane for lifting boats and yachts is a steel column mounted on a mooring structure or embankment, in the upper part of which there is a boom capable of 360° rotation. The boom reach, the height of lifting and lowering the slings below the zero mark are determined based on the customer's request.
Such a crane can have 1 or 4 lifting points. Each lifting point is equipped with a winch. The standard winches are electrically driven, and hydraulic winches can be installed on request. ...
#30738
CLS Gantry lifts
CLS type pneumatic wheeled gantry lifts are used on construction sites for lifting and transporting large and heavy objects of various geometries and mass characteristics – beams of superstructures, bridge structures, metal structures, reinforced concrete products, blocks for modular housing, building materials, tunneling boards and other mechanisms and equipment. The lifting capacity of such cranes can range from 15 to 1000 tons, depending on the tasks being solved.
A self-propelled gantry crane of the CLS type is a spatial frame with one or two arches mounted on wheels with pneumatic tires. The dimensions of the crane – span, height under the hook, wheelbase – are determined according to the customer's technical specifications and dimensional restrictions. There are lifting points on the arches, which can be from 1 to 4. They can move along the arches using cargo trolleys. The cargo is lifted using one, two or four hydraulically operated winches, which can operate independently or synchronously. Lifting points can be equipped with hooks or other equipment. The crane can be equipped with specialized traverses and lifting devices, including manually and hydraulically adjustable ones; automatic ones that do not require additional personnel to sling cargo.
The lift has a diesel-hydraulic drive, the diesel engine and hydraulic equipment are located in the engine compartment located under one of their longitudinal beams. The crane is moved using hydraulic motors built into the wheel gearboxes. The drive is carried out on 2 or 4 wheels, the maximum slope to be overcome is 4% as standard, and the travel speed is up to 10 km/h. The steering is self-correcting on all wheels, which allows for good maneuverability and a long tire life. Electronic steering is available as an option, which significantly improves maneuverability and allows you to perform the following maneuvers: turning the front /rear /all wheels, turning all wheels 90°, crab stroke 45°, carousel stroke. A diesel-electric crane can be manufactured on request. ...
A self-propelled gantry crane of the CLS type is a spatial frame with one or two arches mounted on wheels with pneumatic tires. The dimensions of the crane – span, height under the hook, wheelbase – are determined according to the customer's technical specifications and dimensional restrictions. There are lifting points on the arches, which can be from 1 to 4. They can move along the arches using cargo trolleys. The cargo is lifted using one, two or four hydraulically operated winches, which can operate independently or synchronously. Lifting points can be equipped with hooks or other equipment. The crane can be equipped with specialized traverses and lifting devices, including manually and hydraulically adjustable ones; automatic ones that do not require additional personnel to sling cargo.
The lift has a diesel-hydraulic drive, the diesel engine and hydraulic equipment are located in the engine compartment located under one of their longitudinal beams. The crane is moved using hydraulic motors built into the wheel gearboxes. The drive is carried out on 2 or 4 wheels, the maximum slope to be overcome is 4% as standard, and the travel speed is up to 10 km/h. The steering is self-correcting on all wheels, which allows for good maneuverability and a long tire life. Electronic steering is available as an option, which significantly improves maneuverability and allows you to perform the following maneuvers: turning the front /rear /all wheels, turning all wheels 90°, crab stroke 45°, carousel stroke. A diesel-electric crane can be manufactured on request. ...
#30739
RGC Gantry Cranes
Gantry cranes are used in warehouses, construction sites, hydraulic structures and hydroelectric power plants, slipways of shipbuilding enterprises Such cranes can perform a wide range of lifting and transport operations. They are divided into transshipment, construction and installation, as well as special ones, for example, for work on hydraulic structures. The lifting capacity of gantry cranes varies widely and can range from 1 to 1000 tons or more.
A gantry crane consists of one or two beams mounted on supports that move along rails located on the work site. One or two cargo trolleys mounted on the main beam are used for the transverse movement of the load. Lifting winches are located on the trolleys. The crane has an electric drive and is powered by an industrial network. The crane can be controlled using a remote radio control, a wired remote control or a stationary remote control. The stationary remote control is usually located in the cabin, which protects the operator from adverse weather conditions.
Gantry cranes are designed and manufactured based on customer requirements and meet the set tasks as much as possible, including non-standard ones that require an original solution....
A gantry crane consists of one or two beams mounted on supports that move along rails located on the work site. One or two cargo trolleys mounted on the main beam are used for the transverse movement of the load. Lifting winches are located on the trolleys. The crane has an electric drive and is powered by an industrial network. The crane can be controlled using a remote radio control, a wired remote control or a stationary remote control. The stationary remote control is usually located in the cabin, which protects the operator from adverse weather conditions.
Gantry cranes are designed and manufactured based on customer requirements and meet the set tasks as much as possible, including non-standard ones that require an original solution....
#30741
OHC overhead cranes
Overhead cranes are used to move various loads in workshops and premises of enterprises, warehouses and other industrial buildings. The overhead crane is a beam installed under the ceiling of the workshop, which has the ability to move along the entire length of the room. One or two cargo trolleys with lifting winches are installed on the main beam for the transverse movement of cargo. The winches have the possibility of independent and synchronized operation.
The lifting capacity of cranes can vary from 1 to 100 tons or more, the span value is set depending on the size of the building or the customer's requirements.
The drive of the overhead cranes is electric, powered by an industrial network. The crane is controlled using a remote radio control, or using a wired remote control. Overhead cranes installed in one span of a building, when moving bulky and heavy loads, may be able to work in tandem, controlled by one remote control. ...
The lifting capacity of cranes can vary from 1 to 100 tons or more, the span value is set depending on the size of the building or the customer's requirements.
The drive of the overhead cranes is electric, powered by an industrial network. The crane is controlled using a remote radio control, or using a wired remote control. Overhead cranes installed in one span of a building, when moving bulky and heavy loads, may be able to work in tandem, controlled by one remote control. ...
#30742
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access