Your city — Москва?
Sale of concrete mixing equipment in Murmansk
Found 15 sales listings
Concrete mixers FAW J6P CA5250 6x4
FAW AMKAR Mixer-704783-30 - a truck with a rotating capacity of 10 cubic meters mounted on the chassis. to deliver the finished concrete mix to the construction site.
Description of the model ...
Description of the model ...
#30033
Concrete mixers FAW J6P CA5250 8x4
The AMKAR 704783-31 mixer is a construction machine with a mixing drum with a volume of 12 cubic meters on the FAW 3310 chassis with an 8x4 wheel formula.
Description of the model ...
Description of the model ...
#30034
Sany HBT6013C-5D Stationary Concrete pumps
Diesel concrete pump SANY HBT6013C-5D, 2022
Specifications: ...
Specifications: ...
#30142
Silos for cement and dry mixes EUROSILO MOBILE 25
The EUROSILO MOBILE horizontal cement silo is designed to receive cement from a cement truck, store and deliver it via a screw conveyor.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
#30167
Silos for cement and dry mixes EUROSILO collapsible structure D 9.2 m
EUROSILO collapsible cement silos are designed for receiving cement from a cement truck, storing and delivering it via a screw conveyor to a concrete mix preparation site. Cement is loaded into the silo via a pneumatic cement pipeline, and an aeration system is installed in the lower (conical) part of the silo to ensure non-stop material supply.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
#30168
EUROMIX ROLLTRUCK CMT 4000R concrete mixers
The EUROMIX ROLLTRUCK CMT 4000R self—propelled concrete mixer is a highly efficient solution for work on construction sites where autonomy and high productivity are required. Equipped with a 6.1 m3 double-cone mixing drum, this model is capable of producing up to 4 m3 of concrete in one cycle. The design of the drum with a double spiral screw and blades ensures uniform and high-quality mixing of the concrete mixture. The 116 hp YUNNEI turbocharged and water-cooled engine ensures reliable operation even in difficult conditions.
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
#30172
EUROMIX ROLLTRUCK CMT 1200 concrete mixers
Self—propelled concrete mixer with self-loading EUROMIX ROLLTRUCK CMT 1200 is a modern technology designed for autonomous preparation and transportation of concrete mixes directly on the construction site.
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
#30173
EUROMIX 400.4 mortar pumps
Screw (gerotor) mortar pumps of the EUROMIX 400.4 series manufactured by the EUROMIX PLANT are designed for transportation under pressure of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.4 series gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600 series mixers or with turbulent type mixers of the NAVIGATOR series. The EUROMIX 400.4 series pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30177
EUROMIX 400.1 MINI mortar pumps
EUROMIX 400.1 MINI screw (gerotor) mortar pumps manufactured by the EUROMIX PLANT are designed for pressure transportation of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.1 MINI gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600, EUROMIX SUPERMIX series mixers or EUROMIX NAVIGATOR series turbulent type mixers, EUROMIX 400.1 MINI pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30179
Concrete pumps KRANMASH TP49RZ6-Sinotruk
Advantages
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
#30382
XCMG HB37V Concrete Pumps
The XCMG HB37V concrete pump is a specialized construction equipment that ensures the efficient supply of concrete mix from the concrete mixer truck to the installation site. It is a pumping unit mounted on a cargo chassis with a concrete distribution boom. The concrete pump is widely used on a wide variety of construction sites due to its convenience and efficiency. The maximum feed height of this model is 36.3m, with a capacity of 120/170 m3/h. The use of a concrete truck pump increases the speed and quality of construction work.
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
#30289
XCMG HB37V concrete pump on ISUZU 6x4 chassis
NEW XCMG concrete pump on ISUZU GIGA 6x4 chassis, feed height 37 m.
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
#29844
YUGONG SDM3000 Concrete mixers
Mobile concrete batching plant on wheels. In size!
A highly efficient machine that combines the functions of loading, mixing and transporting concrete mix.
Available with EPSM in Blagoveshchensk, Ulan-Ude, Krasnodar. ...
A highly efficient machine that combines the functions of loading, mixing and transporting concrete mix.
Available with EPSM in Blagoveshchensk, Ulan-Ude, Krasnodar. ...
#29843
ISUZU Giga concrete mixer truck 9 m3 barrel with distribution boom and pump
ISUZU GIGA 8x4 concrete mixer 9 m3 barrel with concrete pump and 28 m distribution boom.
In production at the factory.
It takes 30-60 days to order. ...
In production at the factory.
It takes 30-60 days to order. ...
#29839
ISUZU ELF concrete mixers 3 m3 barrel
Available with EPTS in Blagoveshchensk!
THE BARREL DRIVE has been IMPROVED (the barrel does not stop, the gears turn on, the rotation speed is adjusted).
Custom-made concrete mixers with a barrel volume of 4-10 m3 are available. ...
THE BARREL DRIVE has been IMPROVED (the barrel does not stop, the gears turn on, the rotation speed is adjusted).
Custom-made concrete mixers with a barrel volume of 4-10 m3 are available. ...
#29836
You might also be interested in other listings:
Trailers of the MEUSBURGER NOVTRAK AH-342 sorting trucks
Three-axle sorting trailer with swivel drawbar, model AH-342
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...
#29998
Woodchip semi-trailers MEUSBURGER NOVTRAK SP-345
Three-axle woodchip semi-trailer, SP-345 with a body volume of 120 m3
Updated SP-345 three-axle woodchip semi-trailer with a record body volume of 120 m3! The trailer's load capacity is 29 tons. Like all products from Meusburger Novtrak, the semi-trailer is equipped with modern systems!
...
Updated SP-345 three-axle woodchip semi-trailer with a record body volume of 120 m3! The trailer's load capacity is 29 tons. Like all products from Meusburger Novtrak, the semi-trailer is equipped with modern systems!
...
#30001
Container semi-trailers MEUSBURGER NOVTRAK SW-570
Five-axle container semi-trailer, model SW-570
The SW-570 model consists of two container semi-trailers at once: a three-axle and a two-axle, which are interconnected using a saddle-bearing device. In fact, two semi-trailers can be operated either separately or together. The semi-trailer container ship model SW-570 is designed for transportation of the following types of containers:
...
The SW-570 model consists of two container semi-trailers at once: a three-axle and a two-axle, which are interconnected using a saddle-bearing device. In fact, two semi-trailers can be operated either separately or together. The semi-trailer container ship model SW-570 is designed for transportation of the following types of containers:
...
#30005
BONUM semi-trailers 914296-04
BONUM Machine-building Plant, a popular manufacturer of specialized trailers and semi-trailers, as well as special cargo and agricultural machinery in Russia, offers to buy a roll truck: a curtain three-axle semi-trailer for transporting steel coils at a bargain price in Moscow.
A special feature of semi-trailers is the presence of special recesses in the floor, into which the rolled cargo is placed and fixed. If not necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...
A special feature of semi-trailers is the presence of special recesses in the floor, into which the rolled cargo is placed and fixed. If not necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...
#30006
BONUM semi-trailers 914296-04
The BONUM Machine-building Plant is a popular manufacturer of specialized trailers and semi-trailers, which offers to buy a curtain-side semi-trailer for rolling goods or transporting cable coils, etc. Semi-trailers for transporting steel coils or coils are supplied at a bargain price in Moscow directly from the manufacturer.
A special feature of semi-trailers with a coil–tub (from coil - coil) is the presence of special recesses (baths) in the floor, into which the rolled load is placed and fixed. If necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...
A special feature of semi-trailers with a coil–tub (from coil - coil) is the presence of special recesses (baths) in the floor, into which the rolled load is placed and fixed. If necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...
#30007
Fixed wing UAV GEOSCAN 201 geodesy
Geoscan 201 Geodesy
A complex for aerial photography and modeling of vast territories and extended objects with a photogrammetric camera and a GNSS receiver. A complex for aerial photography with a flight time of up to 3 hours. Geoscan 201 Geodesy allows you to shoot up to 80 square kilometers per day and obtain orthophotographs with geo-reference accuracy that meets the requirements of the 1:500 scale. And thanks to the geodetic GNSS receiver on board, it is possible to obtain the exact coordinates of the snap images and improve the quality of data processing. ...
A complex for aerial photography and modeling of vast territories and extended objects with a photogrammetric camera and a GNSS receiver. A complex for aerial photography with a flight time of up to 3 hours. Geoscan 201 Geodesy allows you to shoot up to 80 square kilometers per day and obtain orthophotographs with geo-reference accuracy that meets the requirements of the 1:500 scale. And thanks to the geodetic GNSS receiver on board, it is possible to obtain the exact coordinates of the snap images and improve the quality of data processing. ...
#30009
Fixed-wing UAV ALBATROSS M5
Albatross M5
Productive and easy to operate
...
Productive and easy to operate
...
#30010
Fixed wing UAV ALBATROS M5 AGRO
The M5 AGRO unmanned complex is designed for
agricultural enterprises. The M5 AGRO unmanned complex is a ready-made solution for agriculture. It allows you to receive and independently process information about your fields and the operations taking place on them. The kit includes: an Albatross M5 UAV, a camera, a ground control station, and additionally a multispectral camera can be included in the complex. The warranty is 1 year or 100 take-off/landing cycles.
...
agricultural enterprises. The M5 AGRO unmanned complex is a ready-made solution for agriculture. It allows you to receive and independently process information about your fields and the operations taking place on them. The kit includes: an Albatross M5 UAV, a camera, a ground control station, and additionally a multispectral camera can be included in the complex. The warranty is 1 year or 100 take-off/landing cycles.
...
#30012
Multicopters ALBATROSS D1
Albatross D1 is an industrial quadcopter with a flight time of up to 60 minutes
The body is made of composite materials and carbon fiber power elements. The device has small dimensions and high performance. It is universal for performing a variety of tasks. It is ideal for video monitoring of the area and for cargo delivery. 1 year warranty or 100 take-off/landing cycles
...
The body is made of composite materials and carbon fiber power elements. The device has small dimensions and high performance. It is universal for performing a variety of tasks. It is ideal for video monitoring of the area and for cargo delivery. 1 year warranty or 100 take-off/landing cycles
...
#30013
ALBATROSS A5 Multicopters
Albatross A5 H
The UAV Albatros A5h is a helicopter-type aircraft designed according to a multirotor aerodynamic scheme (copter). The device has a hybrid power plant consisting of an internal combustion engine, an electric generator and electric motors. The maximum flight time of the copter is 4 hours and 30 minutes. The mass of the permissible payload is 5 kg.
...
The UAV Albatros A5h is a helicopter-type aircraft designed according to a multirotor aerodynamic scheme (copter). The device has a hybrid power plant consisting of an internal combustion engine, an electric generator and electric motors. The maximum flight time of the copter is 4 hours and 30 minutes. The mass of the permissible payload is 5 kg.
...
#30014
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access