XILIN CTDR15-III LI-ION STACKERS, SLIDING FORKS AND SUPPORTS (ACCOMPANIED), Nizhny Novgorod

Article number
1040922
Package height, mm
2480
Packing depth, mm
2100
Load capacity, kg
1500
The brand's homeland
China
Country of manufacture
China
Package width, mm
1560
Lifting height, mm
90
Lifting height, mm
5600
Fork length, mm
1150
The size of the support rollers, mm
98x82
Fork width, mm
200-800
Turning radius, mm
1575
Lifting engine power, kW
3.0
Height when folded, mm
2480
Maximum lifting height, mm
5600
Total length, mm
2100
Overall width, mm
1170-1560
The size of the drive wheel, mm
250x70
Lowering speed (with/without load), mm/s
140/190
Lifting speed (with/without load), mm/s
90/160
Aisle width (1000x1200mm pallets), mm
2480
Aisle width (800x1200mm pallet), mm
2465
Engine power of movement, kW
1,2
Battery, V/Ah
24/150
Battery type
Lithium-ion
Battery dimensions, mm
800x254x320
Total height, mm
2480
The size of the rotary balance wheels, mm
150x60
Movement speed (with/without cargo), km/h
5,8/6
Battery weight, kg
160
Slope to be overcome (with or without load), %
6/15
Distance to the load center, mm
600
Displacement engine power, hp
1.63
The XILIN CTDR-III stacker has a well-thought-out, safe design, which is achieved by having a modern AC control system and an emergency reverse button; as well as emergency power off capabilities and an integrated pressure relief valve that protects against overloads. In addition, the equipment has a lifting limit switch that is triggered when the maximum height is reached. This stacker has the ability to adjust the width of forks and supports, so that you can not only work with non-standard loads, but also gain additional stability when working on uneven surfaces. The lifting capacity is 1.5 tons, the lifting height is 5.6 m, and the lifting height starts from 90 mm. The stacker is easy to maintain and operate due to its easy, fast and reliable CANbus connection. This is also facilitated by an economical and easy-to-operate brushless motor, high maneuverability and compactness, as well as requiring minimal effort. The XILIN CTDR-III stacker has a well-thought-out safe design, which is achieved through the presence of a modern alternating current control system and an emergency reverse button; as well as emergency power off capabilities and a built-in a pressure relief valve that protects against overloads. In addition, the equipment has a lifting limit switch that is triggered when the maximum height is reached. This stacker has the ability to adjust the width of forks and supports, so that you can not only work with non-standard loads, but also gain additional stability when working on uneven surfaces. The lifting capacity is 1.5 tons, the lifting height is 5.6 m, and the lifting height starts from 90 mm. The stacker is easy to maintain and operate due to its easy, fast and reliable CANbus connection. This is also facilitated by an economical and easy-to-operate brushless motor, high maneuverability and compactness, as well as minimal effort-consuming charging and battery replacement. The additional advantages of the design include: - Fork and support width adjustment - Stepless speed control system. - Waterproof and dustproof motor design. - Easy access to the battery and nodes. - Emergency stop button and emergency reverse. - High capacity battery. - Vertical engine with a small turning radius. - Low risk of collision, achieved by minimizing blind spots. - Low center of gravity, providing a balance of stability and efficiency of movement speed. - Intuitive multi-function control knob.