XILIN SDJAS500 Stackers WITH SLIDING FORKS AND EXTENDED SUPPORTS, Nizhny Novgorod

Article number
1006807
Packing height, mm
2100
Packing depth, mm
745
Load capacity, kg
500
The brand's homeland
China
Country of manufacture
China
Package width, mm
1500
Lifting height, mm
70
Lifting height, mm
1600
Fork length, mm
1060
Fork width, mm
210-745
Width of one fork, mm
100
Turning radius, mm
2158
Height in the folded position, mm
2000
Ground clearance, mm
25
Maximum lifting height, mm
2100
Total length, mm
1600
Overall width, mm
1500
Lowering speed (with/without load), mm/s
Controlled manual operation
Lifting speed (with/without load), mm/s
25
Load center, mm
500
Aisle width (1000x1200mm pallets), mm
1975
Aisle width (800x1200mm pallet), mm
1915
Fork thickness, mm
48
XILIN SDJAS500 Manual Stacker/1000/1500 — A series of manual stackers with extended supports. Due to this arrangement of the supports, the stacker is more stable and, in addition, its forks sink lower, since they fall between the supports rather than on them, and therefore the lifting height is 70 mm with a typical lifting height of 85-90 mm for stackers. This model has a lifting capacity of 500 kg and a lifting height of 1.6 meters.#|---|#Xilin warehouse equipment is an excellent solution for any warehouse. Xilin warehouse equipment is supplied to 152 countries worldwide, including Russia and the EU. Xilin brand manual stackers have proven themselves only on the good side. The model range includes both economical models and models for heavy loads. XILIN SDJAS500 Manual Stacker/1000/1500 — A series of manual stackers with extended supports. Due to this arrangement of the supports, the stacker is more stable and, in addition, its forks sink lower, since they fall between the supports rather than on them, and therefore the lifting height is 70 mm with a typical lifting height of 85-90 mm for stackers. This model has a lifting capacity of 500 kg and a lifting height of 1.6 meters. Main Features: • The width of the supports reaches 1300 mm with a load capacity of 500 kg, 1250 mm with a load capacity of 1000 kg. • All structural elements including the mast and the power structure of the stacker are made of high-quality steel, which ensures rigidity and durability. • Adjustable forged forks. • Lifting the load can be carried out either by hand, with a classic handle, or by foot using an additional lever, which allows the operator to choose a convenient method or alternate them for a lower load. • The highly efficient pump makes it much easier to manage the load. • Metal mesh protects the user from lifting chains. • The wheels and the brake system are protected by a casing to ensure safety during operation. Detailed technical specifications of the stacker can be found in the technical specifications section below. When choosing a stacker, pay attention to its main performance characteristics, which are important to you. If you need specialist advice, use a convenient communication method for you to obtain comprehensive information on the choice of a stacker.