Hansin HS 450A hydraulic lift (6x6) on KAMAZ 43118 chassis (SPM 732705)

Technical Specifications of Hansin HS 450A
Main Length 9660 mm
Width 2450 mm
Height 3920 mm
The weight of the attachments is 9,800 kg
7-section telescopic boom
The shape is octagonal (8-angle)
, the type of extension is Synchronous of all sections: chain from 2 to 4 sections and cable on safety rails from 5 to 7.
Material DOMEX 700 Steel
Outriggers Type Front and rear X-shaped, hydraulic,
ATOS60 material
Take-out width, mm 7,740 front, 6,435 rear
Operating characteristics Working height 45 m
Lifting height of the platform is 43.2 m
Load capacity of 2 persons or 400 kg
Rotary mechanism Type Hydraulic motor (manual transmission – double gearbox)
The angle of turning Right and left by 350°
Work platform (aluminum basket) Size 1,900 x 575 x 1,000 (L x W x H) - folded, 2,800 x 1,100 x 1,000 (L x W x H) mm - unfolded
Type of rotation Hydraulic motor (mechanical gearbox)
Rotation angle Right and left 360°
Control type Outriggers Lower lever control on the platform on the left and right
Boom Remote control, lower lever control on the platform on the left and right and from the operator's cabin


AGP EQUIPMENT

• Closed operator's cabin – equipped with levers for:

- boom section controls

- by turning the platform

- by turning the work area

• Outrigger and work area lights

• Remote control

• An intercom system between the operator's cabin and the work area

• Electrical insulation of the cradle – 0V.



SAFETY DEVICES:

• Non-return operated valve

• Digital anemometer with wind speed output on the operator's cabin display, an alarm is triggered when the permissible wind speed (10 m/s) is exceeded.

• Automatic limitation of work processes in case of overload

• Sensor for exceeding the angle of rotation of the site

• Automatic leveling and rollover limitation system for the work area

• Weight load sensors

• Boom position monitoring sensors

• Emergency operation stop key

• An electric motor and an additional hydraulic pump for folding the car lift, in case of failure of the main engine of the car.

• Outrigger position sensors

• The system of automatic calculation of the working radius based on the reference contour