Your city — Moscow?
Sale of special equipment in Russia
Found 21019 sales listings
STEAM BUMBLEBEE 12A road marking machines, Moscow
increased loading volume of consumables;
advanced technological equipment;
refilling the car with consumables takes less than 50 minutes.
advanced technological equipment;
refilling the car with consumables takes less than 50 minutes.
#13392
Road marking machines STEAM BUMBLEBEE 11 AN, Moscow
The Bumblebee 11 AN machine is designed for airless application of horizontal road markings with quick-drying paints using retroreflective glass beads. Bumblebee 11 AN has absorbed all the solutions tested on the Bumblebee 11 A marking machine and confidently holds a leading position in the market....
#13391
STEAM BUMBLEBEE 11A road marking machines, Moscow
Base chassis model
GAZ 3302 Gazelle ...
GAZ 3302 Gazelle ...
#13389
Road marking machines STEAM Bumblebee HP Structure, Moscow
The machine is designed for applying horizontal structural markings with cold plastic prepared on the basis of liquid polymer resins that do not contain organic solvents.
#13402
STEAM Bumblebee HP road marking machines, Moscow
The manual road marking machine "Shmelek HP" (hereinafter referred to as the machine) is designed for applying horizontal road markings with cold plastic to dry and clean cement–concrete, asphalt-concrete road surfaces in the form of a smooth line, with the possibility of sprinkling with reflective glass beads....
#13400
STEAM Bumblebee TP road marking machines, Moscow
The machine is designed to perform horizontal marking of roads with modern thermoplastics (pedestrian crossings, stop lines, dividing lines, arrows, etc.), with the possibility of simultaneous sprinkling with light-reflecting glass beads.
#13396
STEAM Contour 30 road marking machines, Moscow
It is intended for applying longitudinal and transverse horizontal road markings with modern single-component paints (enamels) in an airless manner. The car is controlled by an operator coming from behind. The small dimensions of the Contour 30 make it possible to carry out work within the city without interfering with the movement of urban transport....
#13394
STEAM Contour 50 road marking machines, Moscow
10 types of lines in different modes;
reliability and long service life of the equipment;
the possibility of using paint with a high dry residue content.
reliability and long service life of the equipment;
the possibility of using paint with a high dry residue content.
#13413
STEAM Contour 700 TP road marking machines, Moscow
the width of the applied lines is from 5 to 50 cm;
automatic maintenance of the set temperature of plastic;
high performance. ...
automatic maintenance of the set temperature of plastic;
high performance. ...
#13398
STEAM 5000-01 road pit repair machine, Moscow
The STEAM 5000-01 machine is designed for patching asphalt concrete road surfaces by filling holes with a mixture of crushed stone and bitumen emulsion without prior preparation of the surface to be repaired.
#13412
STEAM SUKHOVEY road surface heating machine, Moscow
saving time during work;
the operator's work is as convenient and easy as possible;
mobility and low weight of the machine.
the operator's work is as convenient and easy as possible;
mobility and low weight of the machine.
#13411
STEAM BEAVER road marking machines, Moscow
carbide cutters;
floating milling unit;
the result is without grooves and sharp grooves.
floating milling unit;
the result is without grooves and sharp grooves.
#13410
STEAM VOLCANO road marking machines, Moscow
The Vulkan thermoplastic preparation equipment is designed for melting and kneading thermoplastics immediately before filling into a marking machine. The main elements of the equipment are the thermoplastics tank(s) and the power unit. The transfer of heat generated by a liquid fuel burner to plastic can occur through an intermediate coolant (indirect heating) or directly through the walls of a thermoplastic container (direct heating)....
#13397
STEAM TRAVOIS road marking machines, Moscow
The "Travois" device is designed for applying thick-layer horizontal road markings. It is made of heat-resistant, corrosion-resistant material, which allows it to be used with thermoplastic materials as well.
#13395
Pipe laying machines CHTZ-Uraltrak CHTZ TR12.22.02, Chelyabinsk
Pipelayer, lifting capacity 12.5 tons, boom 9 m, engine preheater, track with shoe width 690mm
#12688
Pipe laying machines CHTZ-Uraltrak CHTZ TR12.22.01, Chelyabinsk
Pipelayer, lifting capacity 12.5 tons, boom 7 m, engine preheater, track with shoe width 690 mm
#12687
Pipe laying machines CHTZ-Uraltrak CHTZ TR20.22.02, Chelyabinsk
Pipelayer, load capacity 20 tons, boom 9m, engine preheater, track with shoe width 690mm
#12690
Pipe laying machines CHTZ-Uraltrak CHTZ TR20.22.01, Chelyabinsk
Pipelayer, load capacity 20 tons, boom 7m, engine preheater, track with shoe width 690mm
#12689
Compactors CHTZ-Uraltrak BKK2.0002, Chelyabinsk
YAMZ-238M2-51 engine, load capacity 5.5t, without quick-drip, blade, metal wheels with cams, cabin with built-in ROPS-FOPS, microclimate facilities: air conditioning, heater OS-7-U2-24, engine preheater
#12659
Compactors CHTZ-Uraltrak BKK2.0001, Chelyabinsk
YAMZ-238M2-51 engine, load capacity 5.5tons, without quick-drip, rock bucket (bucket volume 3.6 cubic meters) , metal wheels with cams, cabin with integrated ROPS-FOPS, microclimate facilities: air conditioning, heater OS-7-U2-24, pre-heater engine
#12658
Crawler bulldozers CHTZ-Uraltrak B14.6020ER, Chelyabinsk
YAMZ-236B-4 engine, 7-roller body, GMT, ESSP, engine preheater, new cabin and hood design, engine and transmission protection, track flaps, hemispherical non-rotating blade "12E", three-pronged ripper "12P", track with a width of The shoe is 560mm
#12657
Crawler bulldozers CHTZ-Uraltrak B14.6020EN, Chelyabinsk
YAMZ-236B-4 engine, 7-roller body, GMT, ESSP, engine preheater, new cabin and hood design, engine and transmission protection, track flaps, hemispherical non-rotating blade "12E", single-pronged ripper "12H", track with a width of The shoe is 560mm
#12656
Crawler bulldozers CHTZ-Uraltrak B14.6020E, Chelyabinsk
YAMZ-236B-4 engine, 7-roller body, GMT, ESSP, engine preheater, new design of the cabin and hood, engine and transmission protection, flaps against tracks, CNC, hemispherical non-rotating blade "12E", caterpillar with a shoe width of 560mm
#12654
Crawler bulldozers CHTZ-Uraltrak B12.6020ER, Chelyabinsk
YAMZ-236B-4 engine, 7-roller body, GMT, ESSP, engine preheater, engine and transmission protection, track flaps, hemispherical non-rotating blade "12E", three-pronged ripper "12P", track with a shoe width of 560mm
#12653
Crawler bulldozers CHTZ-Uraltrak B12.6020EN, Chelyabinsk
YAMZ-236B-4 engine, 7-roller body, GMT, ESSP, engine preheater, engine and transmission protection, track flaps, hemispherical non-rotating blade "12E", single-pronged ripper "12H", track with a shoe width of 560mm
#12652
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access