Your city — Moscow?
Sale of special equipment in Russia
Found 21019 sales listings
Экскаватор LiuGong CLG 920E
ДВИГАТЕЛЬ
Экологический стандарт Tier 2 / Stage II
Марка Cummins ...
Экологический стандарт Tier 2 / Stage II
Марка Cummins ...
#31252
#31253
#31254
#31255
Гусеничный экскаватор XCMG XE180DN
Характеристики гусеничного экскаватора XE180DN
Модель
...
Модель
...
#31256
Экскаватор-погрузчик MST M642
Эксплуатационные параметры MST 642
Размеры, мм, ДхШхВ 6228х2315х3826 ...
Размеры, мм, ДхШхВ 6228х2315х3826 ...
#31257
Hyundai HD 78 with CMU and polyline platform
An autoevacuator with a broken platform and retractable ramps, equipped with a crane manipulator unit (CMU) on a Hyundai HD 78 chassis
The vehicle is designed to evacuate vehicles weighing up to 3.0 tons. ...
The vehicle is designed to evacuate vehicles weighing up to 3.0 tons. ...
#31222
ZMC-25 Truck crane
The ZMC-25 truck crane with a lifting capacity of 25 tons is currently one of the most sought-after examples of modern lifting equipment on the Russian market. The truck crane is characterized by a high degree of reliability, operational simplicity and efficiency in operation. If the load capacity of this model is too large for you, then we suggest considering a MAZ 15 ton truck crane.
The MAZ 6312V3 chassis with a 6 x 4 wheel formula assumes rear-wheel drive, a manual transmission and a spring suspension. With the help of power steering, the overall car is controlled much easier.
Among the important advantages of the MAZ KS truck crane, it is necessary to highlight the following: Excellent maneuverability. The ability to travel on roads with any surface. A modified cabin with increased comfort for the driver. Simple operation. Operability at different temperatures. Excellent maintainability. Versatility, which makes it possible to perform several actions simultaneously. The highest level of safety and reliability of the equipment. Improved cabin thermal insulation, winter heating....
The MAZ 6312V3 chassis with a 6 x 4 wheel formula assumes rear-wheel drive, a manual transmission and a spring suspension. With the help of power steering, the overall car is controlled much easier.
Among the important advantages of the MAZ KS truck crane, it is necessary to highlight the following: Excellent maneuverability. The ability to travel on roads with any surface. A modified cabin with increased comfort for the driver. Simple operation. Operability at different temperatures. Excellent maintainability. Versatility, which makes it possible to perform several actions simultaneously. The highest level of safety and reliability of the equipment. Improved cabin thermal insulation, winter heating....
#31224
Dump truck MAZ 6516W8-420-000
A dump truck with a rear unloading, an 8x4 wheel formula and a U-shaped platform, the MAZ 6516W8-420-000 model is used for transporting and unloading bulk cargo in the construction, agricultural, housing and communal services sectors. The technical advancement of the presented car is determined by the parameters of the power plant and the volume of cargo transported. The car is characterized by: a variety of equipment from reliable manufacturers (YAMZ, ZF, Mercedes); low spare parts costs; comfortable conditions for the driver; stylish modern design; unpretentiousness of use.
KPPSHAPXI 12JS200TA model Body volume 21...
KPPSHAPXI 12JS200TA model Body volume 21...
#31225
Heavy-duty tow truck MAZ
The MAZ tow truck consists of the following main assembly units:— an installed platform; — a MAZ base vehicle; — an intermediate frame (subframe) to which the installation is attached; — the platform is rigidly connected to the base vehicle frame with 16 tie bolts and four stepladders;...
#31227
Tow truck based on MAZ-4381N2-310-01
A special vehicle designed for loading, unloading, and transporting cars in the event of a breakdown, accident, or violation of a number of traffic rules by the driver. Transportation is carried out by means of full loading or towing of the vehicle. It is equipped with a special platform and an Amco Veba 811T-3S manipulator with a maximum reach of 7.75 m. Before the shipment of cars, mandatory pre-sale preparation is carried out. The cost of delivering a car to the regions is calculated individually. The chassis is widely in demand in many sectors of the economy and industry due to its high strength, excellent maintainability, low maintenance costs and affordable cost. The base of the MAZ 4381N2-522-000 flatbed truck is 4200 mm, and the load capacity of this model reaches up to 6150 kg. The MAZ 4381N2-522-000 flatbed truck has a tented platform, and it belongs to the EURO 5 environmental class. It has a long air-suspended driver's cabin, equipped with a fire extinguisher inside, two sleeping places, seat belts, and insulation from external noise.
Source: https://maz-diler.ru/shop/evakuator-na-baze-maz-4381n2-310-01...
Source: https://maz-diler.ru/shop/evakuator-na-baze-maz-4381n2-310-01...
#31228
SDLG B877 Backhoe Loader
The SDLG B877 backhoe loader is a joint product between Volvo and SDLG that meets modern standards of interior design, performance and functionality. Hydraulics, guarantees smoothness and accuracy of work operations. The cabin is maximally oriented for the operator, providing comfort and reducing fatigue. The SDLG B877 excavator is a multifunctional small—class special construction equipment that can be used in road construction, trench construction, airport construction, and power transmission lines with high economic benefits. The equipment is popular among Russian consumers due to its maneuverability and excellent cross-country ability. The 4x4 loader wheel formula makes it possible to operate in Russian regions. The compact size and unique frame structure reduce the turning radius in a small area. Despite the small capacity of the bucket, it moves loads weighing up to 1.8 tons in a standard working body with a volume of 1 m3. The versatility of the car is due to its compactness, functionality, and the ability to travel on public roads.
Source: https://maz-diler.ru/shop/ekskavator-pogruzchik-sdlg-b877f...
Source: https://maz-diler.ru/shop/ekskavator-pogruzchik-sdlg-b877f...
#31229
#31237
#31239
#31242
Кран-манипулятор KANGLIM KS2057H на шасси FAW
Все характеристики
Общие
Максимальная грузоподъемность, кг ...
Общие
Максимальная грузоподъемность, кг ...
#31243
MAN TGS 41.400 8x4 dump truck with Meiller body
The carrier chassis of the Meiller dump truck manufactured by MAN TGS 41.400 8x4 has bridge beams with a permissible load on the front 2 axles of 9 tons each and on the rear – 16 tons each. The thickness of the longitudinal beam of the main frame is 9.5 mm. The springs are parabolic, 4-leaf at the front and 5-leaf at the rear, with shock absorbers and stabilizers on all axles. Tubeless tires 385/65 R22.5 on 11.75 x 22.5 discs are installed on the front axles, and 315/80 R22.5 on 9.00 x 22.5 discs on the rear. The dump truck is equipped with an inline six–cylinder 10-liter MAN D2066 LF06 diesel engine (Euro-2) with a capacity of 400 hp and a torque of with a torque of 1900 Nm. The engine is aggregated with an automated transmission MAN TipMatic 12.28 OD using 12 forward gears. The car has a dry single-disc clutch with a disc diameter of 430 mm. The dump truck is equipped with a Meiller Classic H43 superstructure, it is a 21 cubic dump truck body with a lifting angle of 50 degrees, equipped with fixed side sides, the dump truck body has a low weight and allows the dump truck to receive a large load capacity, the body is designed to transport inert materials (sand, gravel, asphalt). The body has a double floor, heating is provided by exhaust gases, with the possibility of switching winter/summer modes. For ease of operation, the body is equipped with a protective awning mounted on a drum, a spare wheel bracket with a lifting/lowering mechanism with a winch on the front wall, a ladder with counter steps on the inside and two taillights for work lighting. The thickness of the floor is 8 mm, the side walls are 6 mm thick....
#31210
Liebherr R920 Crawler Excavator
The Liebherr R920 universal hydraulic excavator is designed to work with a bucket with a volume of 1 cubic meter, can perform a very wide range of general construction and road work, and is also used for reclamation work in agriculture. The excavator has a mass of 22 tons and an engine power of 150 hp. In this weight and power dimension, the excavator is used as an earthmoving machine for digging trenches, laying underground highways, and building roads. The Liebherr R920 crawler earthmoving machine is a modern machine used for excavating soils, as well as being used as a universal running base for various attachments and tools. As a platform, the excavator is used for the production of a reloading machine, the installation of a processor for felling trees allows you to get a felling and packing machine. The excavator cabin is equipped with modern amenities, including a comfortable seat, an air conditioning system, an information display and security systems. The Liebherr R920 excavator is an efficient excavator model. Due to the high pulling force on the bucket of 159 kN, the excavator provides excellent cutting force, especially when working with hard and heavy materials. The weight of the excavator is 22 tons, the excavator is equipped with a powerful Cummins QSB6.7 diesel engine with a total capacity of 150 horsepower, which ensures high productivity and efficiency of the excavator. The bucket volume is up to 2 cubic meters. It is large enough for efficient extraction and movement of soil or raw materials....
#31211
Bronto Skylift F90HLA crank and telescopic lift
The Bronto Skylift F90 HLA articulated lift is designed to lift a rescue cradle and people to a height of 90 meters, to evacuate people, to deliver rescuers to a height, as well as to extinguish a fire - a special sleeve is attached inside the lift, providing a fire extinguishing agent. The Bronto Skylift F90HLA crankshaft AGP is used for maintenance of wind power plants on wind generators for preventive inspections, cleaning and repair of rotor blades of wind turbines....
#31212
CMU Cormach 180,000 E4 with a lifting capacity of 50 tons
The Cormach 180,000 E4 with a lifting capacity of 50 tons is a Z-shaped hydraulic lifting mechanism with an articulated or "cranked" boom with a rigid (hinged) suspension of the lifting body (hook, gripper, etc.) and an integrated winch for suspending the second lifting device, which is pivotally mounted on the boom head. The boom head of a heavy hydraulic crane is equipped with a rotator. In the folded position, the boom of the hydraulic telescopic crane is parked in the plane of the self-propelled cargo carrier. An additional platform is installed between the hydraulic manipulator and the cabin to accommodate the payload and accessories for the manipulator. The Cormach 180,000 E4 manipulator crane is a technical hydraulic drive device that simulates the functions of a human hand with the ability to telescope cargo and bring it to a height and lower the load below the carrier level due to the cable suspension of the hook. The boom of the manipulator has a payload of 50 tons at a reach of 2 meters, with a practical payload of 30 tons at a reach of 4 meters with a load moment of 156 tons / meter. The maximum reach of the boom is 12 meters, with a lifting capacity of 12 tons per boom. To stabilize the operation, the hydraulic manipulator is equipped with a 4-point support system due to 2 H-shaped outriggers.
...
...
#31213
Liebherr LTM1500-8.1 crane 500 tons
The Liebherr LTM-1500 mobile crane with a lifting capacity of 500 tons is designed for lifting heavy loads to heights, erecting high-rise buildings, and carrying out construction and installation work, including work in the interests of the oil and gas industry. The Liebherr LTM 1500-8.1 truck crane with a lifting capacity of five hundred tons is equipped with a 7-section telescopic boom with a length of 84 m. The load capacity is significantly increased due to the use of a telescopic boom harness. The 91 m long lattice boom extension extends the range of application of this 500-ton machine to a lifting height of 142 m and a departure of 108 m....
#31214
Tow truck for special vehicles MAN 45,500 Wrecker Truck
A number of evacuation operations require the use of special technological machines for rescue operations, and towing damaged and lost various types of equipment. Which differs from conventional road evacuation operations both in type and location. This is primarily industry, the mining industry, and large-scale construction sites that require the evacuation of heavy-duty vehicles and special equipment. These are mines, quarries, tunnels. Also, the evacuation of vehicles off-road requires the use of special machines.
...
...
#31215
Dump trucks NAZ
A dump truck is an indispensable type of construction equipment. No type of serious construction or road work is complete without this miracle car - it carries stones, sand and clay for work.
There are three types of dump trucks: ...
There are three types of dump trucks: ...
#31216
Installing the Palfinger CMU
The Palfinger CMU installation solves production problems. For moving goods from a considerable and short distance. They are produced in several versions, differing in load capacity, depending on which chassis is selected.
The lightest Palfinger manipulators are the Compact series. The optimal ratio between self-weight and lifting force. Innovative developments, which makes them tireless, practical assistants.
...
The lightest Palfinger manipulators are the Compact series. The optimal ratio between self-weight and lifting force. Innovative developments, which makes them tireless, practical assistants.
...
#31217
#31218
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access