Your city — Moscow?
Sale of special equipment in Russia
Found 21019 sales listings
VACUUM OIL COLLECTOR (AKN-10)
It is designed to collect spilled oil, gas condensate, petroleum products and non-aggressive process fluids, as well as to transport them to recycling and processing sites.
Tank capacity, m3 10
Actual tank capacity, m3 10±1.5% ...
Tank capacity, m3 10
Actual tank capacity, m3 10±1.5% ...
#30780
MIXING PLANT US 16
It is intended for transportation of dry powdery materials (cement, grouting mixtures, etc.), for the mechanically controlled supply of these materials by screw conveyors (screws) and preparation of grouting solutions during cementing of oil and gas wells.
KAMAZ 43118 mounting base ...
KAMAZ 43118 mounting base ...
#30781
MIXING UNIT (US 20x50)
It is intended for transportation of dry powdery materials (cement, grouting mixtures, etc.), for the mechanically controlled supply of these materials by screw conveyors (screws) and preparation of grouting solutions during cementing of oil and gas wells.
The largest mass of transported material on roads, tons (when mounted on a KAMAZ 63501 chassis) ...
The largest mass of transported material on roads, tons (when mounted on a KAMAZ 63501 chassis) ...
#30782
REPAIR COILED TUBING INSTALLATION FOR DIRECTIONAL WELLS RKU-25/45
The RKU-25 coiled tubing installation is designed for launching and lifting and technological operations using BDT during major, routine repairs and intensification of oil and gas wells (elimination of hydrate, paraffin, sand deposits and plugs, acid treatment of the bottomhole zone, and so on), without damping them at a pressure at the sealed mouth of up to 70 MPa.
The field of application is the implementation of technological operations for the restoration of oil, gas and gas condensate wells. ...
The field of application is the implementation of technological operations for the restoration of oil, gas and gas condensate wells. ...
#30788
COILED TUBING INSTALLATION COMBINED WITH A GANTRY TYPE MAST (UKPT-10)
The installation is designed for the following operations:
- for routine repairs of wells equipped with rod-type plug-in pumps in order to replace the PUS and carry out treatments of the bottomhole zone and the borehole, flushing the tubing column, well development, etc. using non-coupling long-length pipes (hereinafter referred to as BDT);
- for repairing wells with a hook load of up to 8 tons; ...
- for routine repairs of wells equipped with rod-type plug-in pumps in order to replace the PUS and carry out treatments of the bottomhole zone and the borehole, flushing the tubing column, well development, etc. using non-coupling long-length pipes (hereinafter referred to as BDT);
- for repairing wells with a hook load of up to 8 tons; ...
#30789
LIFTING UNIT FOR WELL REPAIR BASED ON THE RKR CHASSIS (APR-80)
The unit is designed for major repairs and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30790
LIFTING UNIT FOR WELL REPAIR (APRS-12)
The APRS-12 lifting well repair unit (hereinafter referred to as the unit) is designed for routine well repairs, with the possibility of adjusting and centering the mast, lowering and lifting the ESP (installation of submersible centrifugal pumps), and rod screw pumps.
The unit allows you to perform the following operations: ...
The unit allows you to perform the following operations: ...
#30791
LIFTING UNIT FOR WELL REPAIR (APRS-18)
The lifting unit for the repair of inclined wells APRS-18 is designed for routine well repairs.
The unit allows performing the following operations during the repair process:
- mobile movement from well to well using a tractor or a car; ...
The unit allows performing the following operations during the repair process:
- mobile movement from well to well using a tractor or a car; ...
#30792
EXPLORATION DRILLING RIG (URB-30)
The URB-30 installation is designed for structural prospecting drilling for oil and gas by rotary method in soft and medium-hard rocks with direct flushing, as well as drilling water wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
In the basic configuration, the installation is equipped with a BA-15 swivel, an NB-50 pump, an R-410 rotor, a top-mounted worker's balcony, a GS-250 generator, and a 2000x1500 mm work platform....
In the basic configuration, the installation is equipped with a BA-15 swivel, an NB-50 pump, an R-410 rotor, a top-mounted worker's balcony, a GS-250 generator, and a 2000x1500 mm work platform....
#30793
LIFTING UNIT FOR WELL REPAIR (APRS-32/40)
The APRS-32/40 unit is designed for underground repair and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 °C to +40 °C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30794
LIFTING UNIT FOR THE REPAIR OF INCLINED WELLS (APRS-40N)
The unit is designed for carrying out underground repairs of wells with the mouth located at an angle of 45°- 75° relative to the earth's surface, including for performing lifting operations with depth-pumping rods Ø22, 25 mm and tubing Ø48, 60, 73, 89 mm, mechanized screwing-unscrewing rods and pipes with the use of a hydraulic wrench, installation and dismantling of fountain fittings and surge protection equipment.
The design of the unit provides a mobile system for centering the mast relative to the wellhead in 3 coordinates....
The design of the unit provides a mobile system for centering the mast relative to the wellhead in 3 coordinates....
#30795
LIFTING UNIT FOR WELL REPAIR AND DRILLING BASED ON SELF-PROPELLED CHASSIS PPS-4(APRS-40C4)
The APRS-40C4 unit is designed for rotary drilling with direct face flushing in soft and medium-hard rocks of structural exploration wells, hydrogeological and production wells for water, as well as for repairing wells in which the maximum loads will not exceed the Permissible load on the hook in accordance with its load capacity..
The unit allows you to carry out the following work: ...
The unit allows you to carry out the following work: ...
#30796
LIFTING UNIT FOR WELL REPAIR BASED ON URAL CHASSIS (APRS-40M)
The unit is designed for underground repair and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 °C to +40 °C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30797
LIFTING UNIT FOR WELL REPAIR BASED ON KAMAZ CHASSIS (APRS-40 KAM)
The unit is designed for underground repair and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 °C to +40 °C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30798
LIFTING UNIT FOR WELL REPAIR BASED ON SELF-PROPELLED CHASSIS PPS-4 (APRS-50S)
The APRS-50C unit is designed for the repair and development of oil and gas wells (OLS, cattle and OS) with such depths at which the maximum loads, including during the elimination of accidents (seizures) expected during the repair process, will not exceed the Permissible load parameter the hook" according to its load capacity.
The unit allows for the following operations: ...
The unit allows for the following operations: ...
#30799
LIFTING UNIT FOR WELL REPAIR BASED ON KAMAZ CHASSIS (APRS-50 KAM)
The unit is designed for development, major and underground repairs of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30800
LIFTING UNIT FOR WELL REPAIR BASED ON A SEMI-TRAILER (APRS-50P)
The unit is designed for development, major and underground repairs of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30801
LIFTING UNIT FOR WELL REPAIR BASED ON THE RKR CHASSIS (APR-60/80)
The unit is designed for development, major and underground repairs of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30802
LIFTING UNIT FOR WELL REPAIR BASED ON KAMAZ CHASSIS (APR-60/80)
The unit is designed for development, major and underground repairs of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30803
LIFTING UNIT FOR WELL REPAIR BASED ON A SEMI-TRAILER (APR-60/80P)
The unit is designed for development, major and underground repairs of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30804
LIFTING UNIT FOR WELL REPAIR BASED ON THE MZKT CHASSIS (APR-80)
The unit is designed for major repairs and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30805
LIFTING UNIT FOR WELL REPAIR BASED ON KAMAZ CHASSIS (APR-80)
The unit is designed for major repairs and development of oil and gas wells in macroclimatic areas with a temperate climate at ambient temperatures from -45 ° C to +40 ° C.
Main design features and operational advantages: ...
Main design features and operational advantages: ...
#30806
Ilosos 5m3 based on ISUZU ELF 2025
Ilosos 5 m3 based on ISUZU ELF 2025 Euro-5
The tank: ...
The tank: ...
#30814
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access