Your city — Москва?
Sale of ТОНАР equipment in Russia
Found 149 sales listings
Tonar B4-16V/VK Flatbed semi-trailer
Dimensions:
Length (internal dimensions), mm
16510 ...
Length (internal dimensions), mm
16510 ...
#30700
Semi-trailer with sliding floors Tonar SPD4-55
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30697
Tonar L3 sorting truck semi-trailer
Semi-trailer-sorting truck for the transportation of long loads with a length of 2x6m or 3x4m (timber materials, pipes, etc.).
Tonar L3: collapsible cones, front steel shield with additional reinforcements, mechanical winches for cargo binding.
Tonar L3: collapsible cones, front steel shield with additional reinforcements, mechanical winches for cargo binding.
#30696
Container semi-trailer Tonar K4-U
Dimensions:
Length of semi-trailer, mm
12192 ...
Length of semi-trailer, mm
12192 ...
#30695
Container semi-trailer Tonar K4-20
Sizes:
The width of the semi-trailer, mm
2550 ...
The width of the semi-trailer, mm
2550 ...
#30694
Container semi-trailer Tonar K4-40
Dimensions:
Length of semi-trailer, mm
12570 ...
Length of semi-trailer, mm
12570 ...
#30693
Container semi-trailer Tonar K3-40 (ADR)
The semi-trailer is certified and meets the technical requirements of a safe EURO 3 truck.
The Tonar K3-40 container semi-trailer belongs to the AT, FL, EX/II vehicles. The ADR clause in the vehicle type approval confirms the conformity of the container ship design with all technical requirements for the transportation of dangerous goods. ...
The Tonar K3-40 container semi-trailer belongs to the AT, FL, EX/II vehicles. The ADR clause in the vehicle type approval confirms the conformity of the container ship design with all technical requirements for the transportation of dangerous goods. ...
#30692
Container semi-trailer Tonar K3-20 (cut-off)
Dimensions:
Length of semi-trailer, mm
9076 ...
Length of semi-trailer, mm
9076 ...
#30691
Container semi-trailer Tonar K3-U
Dimensions:
Length of semi-trailer, mm
12750 ...
Length of semi-trailer, mm
12750 ...
#30690
Tonar-95892 dump grain semi-trailer with rear unloading
The body volume is 33/38 cubic meters (with extension sides).
...
...
#30687
Semi-trailer with side unloading Tonar SSH6-53
The Tonar SSH6-53 side-unloading dump truck has proven itself well in operation. This is a semi-trailer dump truck, which has two sections with side unloading. This model has all the advantages that dump semi-trailers with side unloading have, namely, minimal risk of tipping over, no need to adjust to the height and flat surface of the unloading area, and a special side system that prevents cargo from hitting the wheels.
This equipment has a load capacity of up to 100,000 kilograms, and a body volume of 53 cubic meters, reinforced balancing suspension on elastic elements, dual-circuit hydraulic equipment and six axles with a gable bushing. Such data could not go unnoticed by consumers, therefore, dump semi-trailers of the presented model are in high demand. If you are interested in selling semi-trailers, then the Tonar SSH6-53 dump truck is one of the best in its category. ...
This equipment has a load capacity of up to 100,000 kilograms, and a body volume of 53 cubic meters, reinforced balancing suspension on elastic elements, dual-circuit hydraulic equipment and six axles with a gable bushing. Such data could not go unnoticed by consumers, therefore, dump semi-trailers of the presented model are in high demand. If you are interested in selling semi-trailers, then the Tonar SSH6-53 dump truck is one of the best in its category. ...
#30678
Semi-trailer with side unloading Tonar SSH3-40
If you are engaged in construction, then your company needs a semi-trailer dump truck. The main advantages of side-unloading models are the minimal risk of tipping over, as well as the fact that unloading can take place in a height-limited space. Tonar SSH3-40 is a dump semi–trailer with side unloading.
Dump semi-trailers of this model have a volume of forty cubic meters and a load capacity of almost forty-three tons (42.85 tons). Brief technical characteristics: three-axle, gable roof, with spring-balancing suspension, equipped with hydraulic cylinder and awning. The lifting angle of the body is 44 degrees. Overall dimensions of the model: height - 3.3 m. width – 2.55 m, length – 11.05 m. ...
Dump semi-trailers of this model have a volume of forty cubic meters and a load capacity of almost forty-three tons (42.85 tons). Brief technical characteristics: three-axle, gable roof, with spring-balancing suspension, equipped with hydraulic cylinder and awning. The lifting angle of the body is 44 degrees. Overall dimensions of the model: height - 3.3 m. width – 2.55 m, length – 11.05 m. ...
#30677
Articulated dump truck Tonar-7507
To date, TONAR technological (mining) dump trucks have no analogues on the territory of the Russian Federation, and their technical characteristics are not inferior to foreign models of mining dump trucks. At the same time, Russian production has a number of significant advantages.:
- designed specifically for the climatic conditions of Russia and the CIS; ...
- designed specifically for the climatic conditions of Russia and the CIS; ...
#30675
Grain loader tractor Tonar-PT11
Advantages:
- elimination of idle time of combine harvesters while waiting for cars;
- reduction of pressure on the fertile soil layer due to wide wheels (P=1.6 kg/cm2); ...
- elimination of idle time of combine harvesters while waiting for cars;
- reduction of pressure on the fertile soil layer due to wide wheels (P=1.6 kg/cm2); ...
#30674
Semi-trailer dump truck with bottom unloading Tonar-9591
A semi-trailer dump truck (with a bottom conveyor) is designed to transport potatoes and other agricultural crops with a specific density of no more than 0.8 cubic meters.
Advantages: ...
Advantages: ...
#30672
Tinted semi-trailer Tonar T4-16V/VK
The T4-16V/VK semi-trailer is designed to transport goods weighing up to 27,000 kilograms, with a body volume of 110.6 cubic meters. Special attention should be paid to the awning fabric, which has a density of 900 grams per square meter. This semi-trailer is curtain-sided (the roof and sides of the semi-trailer are shifted separately), which is very convenient when loading and unloading both from the sides of the semi-trailer and from the upper part. For greater operational comfort, there is a special handle on the outside designed to move the side awning.
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
#30670
Tinted semi-trailer Tonar T4-13V/VK
The T4-13V/VK semi-trailer is designed to transport goods weighing up to 27,000 kilograms, with a body volume of 92 cubic meters. Special attention should be paid to the awning fabric, which has a density of 900 grams per square meter. This semi-trailer is curtain-sided (the roof and sides of the semi-trailer are shifted separately), which is very convenient when loading and unloading both from the sides of the semi-trailer and from the upper part. For greater operational comfort, there is a special handle on the outside designed to move the side awning.
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
#30669
Tinted semi-trailer Tonar T3-16/K
The Tonar T3-16/K awning semi-trailer will allow transporting a large volume of cargo -110 cubic meters. The weight of the loaded semi-trailer together with the spare wheel is 8,300 kg. The internal height is 2,700 millimeters, the length is 16,500, which explains the large capacity. This model has a welded frame made of I-beam spars connected by crossbars. The floor is made of high-strength laminated plywood, and is also equipped with special cargo fastening elements.
The semi-trailers of this model have a dependent suspension with pneumatic elements that allow you to change the height for more comfortable loading and unloading. The undercarriage has reinforced spring brackets and additional braces, making the entire structure much more durable. Buying a semi-trailer of this model would be a good solution for a company whose activities are related to the transportation of large shipments. ...
The semi-trailers of this model have a dependent suspension with pneumatic elements that allow you to change the height for more comfortable loading and unloading. The undercarriage has reinforced spring brackets and additional braces, making the entire structure much more durable. Buying a semi-trailer of this model would be a good solution for a company whose activities are related to the transportation of large shipments. ...
#30668
Tinted semi-trailer Tonar T3-13/K
The Tonar T3-13/K semi-trailer is designed to transport goods weighing up to 31,000 kilograms, with a body volume of 92 cubic meters. Special attention should be paid to the awning fabric, which has a density of 900 grams per square meter. This semi-trailer is curtain-sided (the roof and sides of the semi-trailer are shifted separately), which is very convenient when loading and unloading both from the sides of the semi-trailer and from the upper part. For greater operational comfort, there is a special handle on the outside designed to move the side awning.
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
The body structure is characterized by increased strength, since the sides of this model are made of aluminum. By purchasing such a semi-trailer, you get a number of advantages, because aluminum has increased resistance to corrosion and various environmental influences. All our semi-trailers are equipped with an air suspension control crane, which allows height adjustment for more comfortable loading and unloading. You can buy a Tonar semi-trailer of this or another model, as well as get detailed expert advice if you have any questions, on our website. ...
#30667
Tinted semi-trailer Tonar T3-13/K in TIR version
Tonar T3-13/K is a curtain semi-trailer in the TIR version designed for both international transportation under a customs seal and domestic transportation.
This semi-trailer is curtain-sided (the roof and sides of the semi-trailer are shifted separately), which is very convenient when loading and unloading both from the sides of the semi-trailer and from the upper part. For greater operational comfort, there is a special handle on the outside designed to move the side awning. ...
This semi-trailer is curtain-sided (the roof and sides of the semi-trailer are shifted separately), which is very convenient when loading and unloading both from the sides of the semi-trailer and from the upper part. For greater operational comfort, there is a special handle on the outside designed to move the side awning. ...
#30666
Isothermal Tonar semi-trailer R4-16V (41 Euro pallets)
The Tonar R4-16V is equipped with a specially designed system to effectively prevent damage when loading and unloading this semi-trailer. The high-tech system includes super-strong rollers and diagonal crossbars securely fixed to the chassis.
Lighting devices and all signaling devices comply with all EU requirements. The semi-trailer is equipped not only with outdoor lights, but also with indoor LED lights. ...
Lighting devices and all signaling devices comply with all EU requirements. The semi-trailer is equipped not only with outdoor lights, but also with indoor LED lights. ...
#30664
Refrigerated Tonar semi-trailer R3-13 (33 euro pallets)
Dimensions:
Length (internal dimensions), mm
13669 ...
Length (internal dimensions), mm
13669 ...
#30663
Refrigerated semi-trailer Tonar R3-14 (36 europlane)
The Tonar R3-14 is equipped with a specially designed system to effectively prevent damage when loading and unloading this semi-trailer. The high-tech system includes super-strong rollers and diagonal crossbars securely fixed to the chassis.
Lighting devices and all signaling devices comply with all EU requirements. The semi-trailer is equipped not only with outdoor lights, but also with indoor LED lights. ...
Lighting devices and all signaling devices comply with all EU requirements. The semi-trailer is equipped not only with outdoor lights, but also with indoor LED lights. ...
#30662
Refrigerated truck semi-trailer Tonar R3-13T
The body of the Tonar R3-13T semi-trailer is reinforced for transporting meat carcasses in a suspended state. This body is made of galvanized sandwich panels filled with polyurethane foam. This feature makes the thermal conductivity of the semi-trailer body practically zero, which minimizes the loss of temperature necessary for the transportation of products.
The R3-13T tonar is designed taking into account all the conditions necessary for the transportation of perishable products. The presented semi-trailer has an ATP certificate of full compliance with the standards for the transportation of perishable foodstuffs. There is an ATP 1-911-08/13 test report. ...
The R3-13T tonar is designed taking into account all the conditions necessary for the transportation of perishable products. The presented semi-trailer has an ATP certificate of full compliance with the standards for the transportation of perishable foodstuffs. There is an ATP 1-911-08/13 test report. ...
#30660
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access