Lonking CDM835 front wheel loaders, Samara

Standard bucket capacity

m3

2,3

Load capacity

kg

3500

Separation force

kg/kN

10 503 / 103

Working cycle time

sec.
The increased bucket volume by 25%, combined with the increased nominal load capacity, can significantly increase productivity at the same cost of work performed as other 3-ton class front loaders. In fact, it turns out that you ship every fourth bucket for free.

The largest unloading height in the class is 3144 mm, the height up to the bucket attachment finger to the boom is 4048 mm. The loader can load any dump trucks and even semi-trailers.

The 140 hp turbocharged Weichai WP6G140E22 diesel engine has sufficient torque reserve and clean exhaust.

The reliable hydromechanical gearbox is protected from below by the frame of the machine, which prevents its damage when driving over rough terrain and uneven roads.

The gimbal, which transmits torque to the front axle, is located inside the shafts, not under them, which also reduces the risk of damage.

The extended wheelbase ensures the stability of the loader, and its compact dimensions allow it to maneuver in a confined space.

The bucket is equipped with an automatic leveling system and an automatic lifting height limitation system. This reduces the working cycle time by 10%, increases the service life of the fingers and other boom elements.

The cabin has additional noise insulation and an air-conditioned climate system. Air deflectors allow you to direct air both to the operator and to all windows.

The cabin is equipped with ROPS&FOPS protection Source: https://vektor163.ru/p/1124457868-frontalnyy-pogruzchik-lonking-cdm835/