Vibrating plates, Samara

Gasoline vibrating plate Krasny Mayak VP-12-80 is designed for compaction of various bulk building materials (sand, pebbles, etc.), soils, asphalt, asphalt concrete, paving slabs, paving stones during excavation and road construction works. It is especially effective in "pit repairs", in the construction of blind areas, laying asphalt around columns and wells, as well as in other hard-to-reach places.
Features:
• It is a structure made of a plate, which is its working part, in the center of which a vibrator is installed.
• Compaction occurs due to the vertical component of the driving force generated in the vibrator.
• The translational motion of the vibration compactor occurs due to the horizontal component of the driving force.
• The driving force of the vibrating plate can be adjusted by changing the driving force of the vibrator.
• Equipped with wheels, headphones and special vibration-proof gloves.

Centrifugal force of the vibrator, kN: 12;
Oscillation frequency, Hz: 90;
Working plate width, m: 0.45;
Effective working surface, m2: 0.26;
Sealing depth, m: 0.2;
Movement speed, m/min: 20-25;
Engine Model: Honda GX120;
Engine type: petrol, 4-stroke, single cylinder, air-cooled;
Maximum engine speed (limited by the engine manufacturer), min: 3600 (3000);
Maximum power at 3600 kW/hp: 2.6/3.5;
Fuel: gasoline AI-92;
Fuel tank capacity, l: 2.5;
Fuel consumption, l/h: 1;
Engine lubrication: SAE 10W-30 automotive oil;
Oil volume in the crankcase, l: 0.6;
Volume of oil in the vibrator, ml: 50;
V-belt type: XPA-800, QXPA-800;
Volume of the drainage system water tank, l: 10;
Dimensions of the plate in the working position LxWxH, mm: 980x450x850;
Dimensions of the plate in the transport position LxWxH, mm: 850x450x760;
Weight, kg: 80
Gasoline vibrating plate Krasny Mayak VP-12-80 is designed for compaction of various bulk building materials (sand, pebbles, etc.), soils, asphalt, asphalt concrete, paving slabs, paving stones during excavation and road construction works. It is especially effective in "pit repairs", in the construction of blind areas, laying asphalt around columns and wells, as well as in other hard-to-reach places.
Features:
• It is a structure made of a plate, which is its working part, in the center of which a vibrator is installed.
• Compaction occurs due to the vertical component of the driving force generated in the vibrator.
• The translational motion of the vibration compactor occurs due to the horizontal component of the driving force.
• The driving force of the vibrating plate can be adjusted by changing the driving force of the vibrator.
• Equipped with wheels, headphones and special vibration-proof gloves.