Main technical parameters:
Basic Parameters 1.2 Model
ECL 10SC
1.3 Power supply (battery, diesel, petrol, gas, manual)
Battery
1.4 Operator's position
Walking
1.5 Load capacity Q (t) 1.0
1.6 Loading center c (mm) 600
1.8 Distance from center of axle to fork x (mm) 780
1.9 Wheelbase y (mm) 1281
Weight 2.1 Gross weight kg 570
2.2 Load on the front/rear axle with a load of kg 590/960
2.3 Load on the front/rear axle without load kg 405/145
Wheels, chassis, Tires
Polyurethane (PU)
3.2 Size of the front (driving) wheels Æxw(mm) Æ220×70
3.3 Rear wheel size Axxw(mm) A8080×93
3.4 Additional wheels (dimensions) Æxw(mm) Æ124×60
3.5 Wheels, number of front/rear wheels (x — drive)
1x+1/2
3.6 Front wheel track b10 (mm) 529
3.7 Rear wheel track b11 (mm) 420
Dimensions 4.2 Overall height of the mast minimum h1 (mm) 1950
4.3 Free lifting height h2 (mm) 70
4.4 Lifting height h3 (mm) 2808
4.5 The overall height of the mast is maximum h4 (mm) 3325
4.9 Handle height in working position min. / max. h14 (mm) 785/1300
4.15 Fork height in the lower position h13 (mm) 92
4.19 Total length l1 (mm) 1820
4.20 Fork front length l2 (mm) 652
4.21 Overall width b1 (mm) 800
4.22 Fork dimensions s/e/L (mm) 83/167/1150
4.25 Fork spacing b5 (mm) 584
4.32 Ground clearance in the center of the base m2 (mm) 9
4.34 Aisle width with pallet 800X1200MM Ast (mm) 2250
4.35 Turning radius Wa (mm) 1485
Characteristics 5.1 Travel speed, loaded/unloaded km/h 4.3/4.5
5.2 Lifting speed, loaded/unloaded m/s 0.11/0.16
5.3 Fork speed downwards, loaded/unloaded m/s 0.13/0.11
5.8 Maximum slope to be overcome, loaded/unloaded %5/10
5.10 Braking system
Electromagnetic
Parameters of the electric system 6.1 Power of the motion motor S2 60min kW 0.45
6.2 S3 lifting motor power 7.5% kW 2.2
6.3 Battery standard
—
6.4 Supply voltage, rated capacity K5 V/Ah 2x 12/ 85
6.5 Battery weight kg 2x 25
6.6 Energy consumption according to the VDI cycle kWh/h 0.73
Other 8.1 Stroke control type
DC
8.4 Noise level according to EN 12053 dB(A)
Entry-level self-propelled stacker with a lifting capacity of 1000 kg and lifting heights up to 3500 mm. It is equipped with maintenance-free starter type batteries with a built-in charger and scales.
Standard equipment includes:
DC motor
and Curtis controller.
The accuracy of the mass measurement is +/- 0.4% of the maximum load capacity (+/- 4 kg).

Stackers