Your city — Москва?
Wacker Neuson DPU 6555 vibrating plates, Saint Petersburg
Category:
Special machinery manufacturer:
Condition:
New
Availability:
On order
#13157
Description
Producerwacker Neuson
Working weight518 kg
Centrifugal force 65 kN
Base size 550 x 900 mm
Working width (with expansion plate) mm860
Fuel type Diesel
To seal large layers of loose soils (sand, gravel, pebbles), we suggest you use the diesel model DPU 6555 Hehap. This is the heaviest and most productive vibrating plate currently produced by the Wacker Neuson concern (Germany) based on air-cooled engines. That is, we get a relatively low-cost, heavy reversible vibrating plate with a diesel engine in the maximum factory configuration.:
D — diesel P — vibrating plate U — reversible
65 is the centrifugal force in kN. With the working weight of the vibrating plate with expansion plates of 518 kg, it allows for effective compaction of a layer of about 50 cm. Depending on the type of soil.
55 is the width of the base base 550 mm. As standard, the Wacker Neuson DPU 6555 Hehap reversible vibrating plate is convenient to use in cramped conditions (narrow trenches) or to facilitate maneuvering (along walls, wells, etc.)
H – Four-stroke diesel engine Hatz (Germany). An unpretentious, durable and maintainable engine that is installed on diesel vibrating plates from all leading manufacturers. And for Wacker Neuson products, these engines are specially tuned and retrofitted. Due to the fact that the production facilities of Hatz and Wacker Neuson are located only 40 km from each other, good neighborly relations and close cooperation in solving production tasks have been built over the years.
e – electric starter. Of course, this is a convenient option, although there is also a special handle for manually starting the engine in case, for example, the battery runs out.
h is the equipment operating hours counter.
ap – expansion plates. The width of the vibrating plate is increased to 860 mm, which, combined with a movement speed of 28 m/min, gives an amazing productivity of 1.445 m2/hour!
Additionally, a Compatec seal monitoring system can be ordered. With the help of several LEDs, it shows the relative degree of compaction of the treated area of the soil.
In our opinion, at the moment the Wacker Neuson DPU 6555 Hehap diesel reversible vibrating plate is the best offer among vibrating plates weighing about 500 kg. For a fair price, you get:
- a reliable car with a high-quality original European diesel engine.
- European-made and well-equipped.
- cast 12 mm base plate made of high-strength cast iron with inclusions of spherical graphite with stiffeners
- the most convenient management system, which increases labor productivity.
- the most effective vibration damping system on the handle, which increases the level of comfort for the operator and, as a result, productivity.
Working weight518 kg
Centrifugal force 65 kN
Base size 550 x 900 mm
Working width (with expansion plate) mm860
Fuel type Diesel
To seal large layers of loose soils (sand, gravel, pebbles), we suggest you use the diesel model DPU 6555 Hehap. This is the heaviest and most productive vibrating plate currently produced by the Wacker Neuson concern (Germany) based on air-cooled engines. That is, we get a relatively low-cost, heavy reversible vibrating plate with a diesel engine in the maximum factory configuration.:
D — diesel P — vibrating plate U — reversible
65 is the centrifugal force in kN. With the working weight of the vibrating plate with expansion plates of 518 kg, it allows for effective compaction of a layer of about 50 cm. Depending on the type of soil.
55 is the width of the base base 550 mm. As standard, the Wacker Neuson DPU 6555 Hehap reversible vibrating plate is convenient to use in cramped conditions (narrow trenches) or to facilitate maneuvering (along walls, wells, etc.)
H – Four-stroke diesel engine Hatz (Germany). An unpretentious, durable and maintainable engine that is installed on diesel vibrating plates from all leading manufacturers. And for Wacker Neuson products, these engines are specially tuned and retrofitted. Due to the fact that the production facilities of Hatz and Wacker Neuson are located only 40 km from each other, good neighborly relations and close cooperation in solving production tasks have been built over the years.
e – electric starter. Of course, this is a convenient option, although there is also a special handle for manually starting the engine in case, for example, the battery runs out.
h is the equipment operating hours counter.
ap – expansion plates. The width of the vibrating plate is increased to 860 mm, which, combined with a movement speed of 28 m/min, gives an amazing productivity of 1.445 m2/hour!
Additionally, a Compatec seal monitoring system can be ordered. With the help of several LEDs, it shows the relative degree of compaction of the treated area of the soil.
In our opinion, at the moment the Wacker Neuson DPU 6555 Hehap diesel reversible vibrating plate is the best offer among vibrating plates weighing about 500 kg. For a fair price, you get:
- a reliable car with a high-quality original European diesel engine.
- European-made and well-equipped.
- cast 12 mm base plate made of high-strength cast iron with inclusions of spherical graphite with stiffeners
- the most convenient management system, which increases labor productivity.
- the most effective vibration damping system on the handle, which increases the level of comfort for the operator and, as a result, productivity.
Vibratory plates
Wholesale prices
990 000 ₽
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Leasing
Adding to Favorites
Your comment: