Galichanin-150 manipulator with drill for Kamaz 43118 , Saint Petersburg

On-board vehicle KAMAZ 43118
from KMU-150 "GALICHANIN" with drilling equipment.
2 modes "CRANE" and"DRILLING EQUIPMENT"
Wheel formula 6x6
Dv. KAMAZ 740.705 (E-5),
Power 300 hp KPP KPP 154,
inter-axle and inter-wheel locking,
topl. ap. BOSCH, Common Rail
Vehicle load capacity up to 6.05 t.
Inter-wheel and inter-axle interlocks
Cabin restyling without a sleeping place
Attachments:
KMU-150 "GALICHANIN"
Number of telescopable boom sections, pcs 6
The maximum load moment is 15 t.m
. Gross load capacity:
- maximum 7.0 t
- at a maximum departure of 0.3 t
The maximum boom reach is 19.0 m
The maximum lifting height is 20.9 m
The maximum lowering depth is 20.9 m
The type of drive is hydraulic
Column rotation angle, 360 degree
The angle of descent of the boom below the horizon, degree 15.0
Seat control position
The standard base of the supports is 5.6 m
Complete set of front and rear hydraulic supports
Drilling equipment
Delta CD7 hydraulic motor (with RVD1/2");
Technical characteristics of the hydraulic motor. Torque, Nm — 2098-6819
Pressure 200 bar (20 MPa)
Maximum back pressure 59 bar (5.9 MPa)
Oil flow Qmax, l/min — 60 Oil cooler; Telescopic augers: Ø 350 mm, drilling depth up to 8.0 m;