Fuel consumption per 100 kilometers, liters - < 30
Number of seats in the cabin, pcs. - 2
Main operating parameters
Maximum load capacity, t - 25
Minimum nominal reach, m - 3
Maximum load moment, kN. m - 988
Length of the main boom, m - 10.5
The length of the fully extended boom, m - 41
The length of the fully extended boom + jib, m - 49.3
The angle of inclination of the jib, ° - 01530
The longitudinal distance of the outriggers, m - 5.23
Lateral distance of outriggers, m - 6.4
Operating speed parameters
Boom lifting time, c - 35
Time of full boom extension, c - 95
Maximum rotation speed, rpm - 2.5
The maximum lifting speed of the main winch (single rope), m/min - 125
The maximum lifting speed of the auxiliary winch (single rope), m/min - 125
Time of synchronous extension/sliding of the outrigger beam, s - 20/25
Time of synchronous extension/sliding of the outrigger jack, s - 20/25
BOOM: 5-section telescopic U-shaped made of high-strength steel, length from 10.5 m to 41.0 m.
JIB: trellised 8.3 m
BOOM LIFT: Single hydraulic cylinder with safety valve (-2 to 80 degrees).
LOAD TORQUE LIMITER: Hirschmann load torque limiter with automatic lifting mechanism shutdown with digital indicator to display the actual and permissible load
load, radius, telescoping, and other operating parameters.
CRANE INSTALLATION CABIN: The cabin is equipped with panoramic glazing, safety glass, spotlight, windscreen wipers, sliding door and side window, sun visor,
a sprung ergonomic chair with a headrest. The cabin is equipped with a computer and joysticks for pilot control of the crane installation. Metal protection of the front and top
parts of the cabin. Audio-visual overload warning system. Air conditioning, heater.
CRANE SYSTEM ROTATION: 360 degree rotation, axial piston hydraulic motor with planetary gear, service and parking brakes. The rotation speed is from 0 to 2.5 rpm.
COUNTERWEIGHT: - 5.5 t
HYDRAULIC SYSTEM: Axial piston pump, load-sensitive. Hydraulic tank with liquid level indicator. Filter pollution sensor, pressure monitoring fittings in the system.
Hydraulic tank with a capacity of 600 liters.
MAIN WINCH: Axial piston pump with planetary gear, automatic multi-disc brake and rotation indicator. The winch is equipped with a rope 170 m long and 14 mm in diameter.
ADDITIONAL WINCH: Axial piston pump with planetary gear, automatic multi-disc brake and rotation indicator. The winch is equipped with a rope 110 m long.
and with a diameter of 14 mm.
SAFETY DEVICES: Limit switches (limiters) for lifting and lowering the hook, check valves on the boom lifting cylinder, bypass valves.
CHASSIS: 64
OUTRIGGERS: Four H-shaped hydraulically extendable beams, with vertical cylinders and supports. The 5th outrigger is under the cabin. Independent horizontal and vertical control
by moving. Control of the supports on both sides of the crane. Level control.
ENGINE: 6-cylinder SDEC SC9DF340.Q5 turbocharged diesel engine with 245 kW power. Water cooling circulation system; hour meter. The fuel tank is 228 liters.
TRANSMISSION: 9JS135TA transmission, manual with synchronizer, 9 speeds forward and 1 reverse.
pendant: The front is dependent on two longitudinal semi–elliptical springs with hydraulic telescopic shock absorbers. Rear – dependent, balancing, on the longitudinal
semi-elliptical springs.
BRAKE SYSTEM: Double-circuit, pneumatic, divided into contours along the axes (2,3 and 1). Disc brakes for the front axle, drum brakes for the rear. Emergency and parking brake for 2
and 3 axes. A gas dynamic brake installed in the exhaust system of the engine. ABS.
WHEELS AND TIRES: 315/80R22.5, single-pitched on 1 axle, double-pitched on 2 and 3 axles, radial design for highways and off-road.
We use cookies. By continuing to use the site, you agree to the use of cookies and personal data processing in accordance with
the Personal Data Processing Policy.