Your city — Москва?
Scania P440 B8x4HZ Dump Truck
- Category:
- Dump trucks
- Special machinery manufacturer:
- Scania
- Model:
- P440 B8x4HZ
- Year of manufacture:
- 2022
- Condition:
- New
- Availability:
- On order
#31789
Description
Description
B8x4HZ with enhanced automated Opticruise gearbox and trailer coupling, with preparation for installation of pavement cleaning equipment (KDM) with a 20 m3 Betsema body
Chassis assembly SWEDEN
BCM-273FK dump truck superstructure (V=20 m3) with fixed side sides for installation on a SCANIA 8x4 chassis (4750 mm wheelbase) for transportation of inert materials (sand, gravel, asphalt) and installation of KDM equipment.
Technical Specification
Special dump truck body with fixed sides for transportation of inert materials (sand, gravel, asphalt).
The body is equipped with a protective visor over the hydraulic cylinder.
The front side is straight.
The tailgate is inclined and has an automatic locking and opening mechanism.
The tailgate is removable.
The drive of the tailgate lock is mechanical.
The body is equipped with heated bottom, side and front walls of the body from the exhaust system of the chassis engine.
Reduced side slopes inside the body.
Brackets for mounting KDM equipment in the body.
The body is without thermal insulation.
A sliding awning that wraps around a drum.
Spare wheel holder with lifting and lowering mechanism.
The ladder is folding on the left side.
Steel rear fenders (front and rear).
Folding side protection (GOST R 41.73-99).
Rear anti-roll protection.
Brackets for mounting anti-rollback stops.
The dump truck is equipped with a light alarm in the cabin, which notifies about the raised body.
Reflective contour marking (UNECE Regulation No. 48-03).
Shot blasting of the body, priming, painting of the body in RAL 2011.
Two–layer painting - polyurethane primer-enamel Temadur XB 80 (Tikkurila, Finland),
wear-resistant and UV-resistant paint and varnish system.
Technical characteristics of the body.
Volume, m3
Body material and thickness:
Bottom (upper floor), thickness, 8 mm
wear-resistant steel QUARD 400 NLMK or an analog of imported production
Side and front sides, wall thickness, 6 mm
high-strength steel QUEND 400 NLMK or an analog of imported production
BINOTTO hydraulic equipment, HYV
B8x4HZ with enhanced automated Opticruise gearbox and trailer coupling, with preparation for installation of pavement cleaning equipment (KDM) with a 20 m3 Betsema body
Chassis assembly SWEDEN
BCM-273FK dump truck superstructure (V=20 m3) with fixed side sides for installation on a SCANIA 8x4 chassis (4750 mm wheelbase) for transportation of inert materials (sand, gravel, asphalt) and installation of KDM equipment.
Technical Specification
Special dump truck body with fixed sides for transportation of inert materials (sand, gravel, asphalt).
The body is equipped with a protective visor over the hydraulic cylinder.
The front side is straight.
The tailgate is inclined and has an automatic locking and opening mechanism.
The tailgate is removable.
The drive of the tailgate lock is mechanical.
The body is equipped with heated bottom, side and front walls of the body from the exhaust system of the chassis engine.
Reduced side slopes inside the body.
Brackets for mounting KDM equipment in the body.
The body is without thermal insulation.
A sliding awning that wraps around a drum.
Spare wheel holder with lifting and lowering mechanism.
The ladder is folding on the left side.
Steel rear fenders (front and rear).
Folding side protection (GOST R 41.73-99).
Rear anti-roll protection.
Brackets for mounting anti-rollback stops.
The dump truck is equipped with a light alarm in the cabin, which notifies about the raised body.
Reflective contour marking (UNECE Regulation No. 48-03).
Shot blasting of the body, priming, painting of the body in RAL 2011.
Two–layer painting - polyurethane primer-enamel Temadur XB 80 (Tikkurila, Finland),
wear-resistant and UV-resistant paint and varnish system.
Technical characteristics of the body.
Volume, m3
Body material and thickness:
Bottom (upper floor), thickness, 8 mm
wear-resistant steel QUARD 400 NLMK or an analog of imported production
Side and front sides, wall thickness, 6 mm
high-strength steel QUEND 400 NLMK or an analog of imported production
BINOTTO hydraulic equipment, HYV
Dump trucks
Wholesale prices
10 700 000 ₽
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Leasing
Adding to Favorites
Your comment: