Your city — Москва?
Sale construction special equipment in Владимире
Found 23 sales listings
遮阳篷或窗帘五十铃前进，莫斯科
The JAC N350 concrete mixer truck with a 6x4 wheel formula and an allowable gross weight of 35 tons is designed to deliver concrete mix and/or prepare it en route or upon arrival at the concreting site. The dimensions of the car are 9720x2550x3960 mm, the wheelbase is 4100 +1350 mm. The weight of the vehicle in running order is 15030 kg.
A Chinese-made mixing drum with a capacity of 10 cubic meters is installed on the JAC N350 chassis. The drum is installed at an angle of 12 degrees and is equipped with a 400 liter water tank. The loading/unloading speed is 2.7/0.65 cubic meters/min. ...
A Chinese-made mixing drum with a capacity of 10 cubic meters is installed on the JAC N350 chassis. The drum is installed at an angle of 12 degrees and is equipped with a 400 liter water tank. The loading/unloading speed is 2.7/0.65 cubic meters/min. ...
#18160
Concrete mixers FAW J6P CA5250 6x4
FAW AMKAR Mixer-704783-30 - a truck with a rotating capacity of 10 cubic meters mounted on the chassis. to deliver the finished concrete mix to the construction site.
Description of the model ...
Description of the model ...
#30033
Concrete mixers FAW J6P CA5250 8x4
The AMKAR 704783-31 mixer is a construction machine with a mixing drum with a volume of 12 cubic meters on the FAW 3310 chassis with an 8x4 wheel formula.
Description of the model ...
Description of the model ...
#30034
Sany HBT6013C-5D Stationary Concrete pumps
Diesel concrete pump SANY HBT6013C-5D, 2022
Specifications: ...
Specifications: ...
#30142
Silos for cement and dry mixes EUROSILO MOBILE 25
The EUROSILO MOBILE horizontal cement silo is designed to receive cement from a cement truck, store and deliver it via a screw conveyor.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
#30167
Silos for cement and dry mixes EUROSILO collapsible structure D 9.2 m
EUROSILO collapsible cement silos are designed for receiving cement from a cement truck, storing and delivering it via a screw conveyor to a concrete mix preparation site. Cement is loaded into the silo via a pneumatic cement pipeline, and an aeration system is installed in the lower (conical) part of the silo to ensure non-stop material supply.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
#30168
EUROMIX ROLLTRUCK CMT 4000R concrete mixers
The EUROMIX ROLLTRUCK CMT 4000R self—propelled concrete mixer is a highly efficient solution for work on construction sites where autonomy and high productivity are required. Equipped with a 6.1 m3 double-cone mixing drum, this model is capable of producing up to 4 m3 of concrete in one cycle. The design of the drum with a double spiral screw and blades ensures uniform and high-quality mixing of the concrete mixture. The 116 hp YUNNEI turbocharged and water-cooled engine ensures reliable operation even in difficult conditions.
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
#30172
EUROMIX ROLLTRUCK CMT 1200 concrete mixers
Self—propelled concrete mixer with self-loading EUROMIX ROLLTRUCK CMT 1200 is a modern technology designed for autonomous preparation and transportation of concrete mixes directly on the construction site.
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
#30173
EUROMIX 400.4 mortar pumps
Screw (gerotor) mortar pumps of the EUROMIX 400.4 series manufactured by the EUROMIX PLANT are designed for transportation under pressure of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.4 series gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600 series mixers or with turbulent type mixers of the NAVIGATOR series. The EUROMIX 400.4 series pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30177
EUROMIX 400.1 MINI mortar pumps
EUROMIX 400.1 MINI screw (gerotor) mortar pumps manufactured by the EUROMIX PLANT are designed for pressure transportation of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.1 MINI gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600, EUROMIX SUPERMIX series mixers or EUROMIX NAVIGATOR series turbulent type mixers, EUROMIX 400.1 MINI pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30179
Black Rock Hydraulic Hammers BR1000BS-2
Hydraulic hammer closed body BR1250BS-2 Black Rock
It is installed on excavators weighing 15-18 tons. ...
It is installed on excavators weighing 15-18 tons. ...
#30328
Black Rock Hydraulic Hammers BR750SS-1
Hydraulic hammer side mount BR750SS-1 Black Rock
It is installed on excavators and backhoe loaders weighing 6-9 tons. ...
It is installed on excavators and backhoe loaders weighing 6-9 tons. ...
#30330
Concrete pumps KRANMASH TP49RZ6-Sinotruk
Advantages
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
#30382
Drilling rigs MAIT Ecoline 35
The maximum drilling diameter is 900
Drilling depth is 16 meters ...
Drilling depth is 16 meters ...
#30311
Geax EK60 CFA Drilling Rigs
Drilling piles with kelly rod
Continuous Hollow Auger -CFA ...
Continuous Hollow Auger -CFA ...
#30317
Drilling rigs MAIT HR40
The maximum drilling diameter is 900 mm.
Drilling depth 26 mm ...
Drilling depth 26 mm ...
#30314
Drilling rigs MAIT BABY DRILL
The maximum drilling diameter is 600 mm
Drilling depth is 18 meters ...
Drilling depth is 18 meters ...
#30313
Drilling rigs Enteco E 9000
The complete list of the E9000 series includes five main models with a total operating weight from 60 to 220 tons. Within this range, there are powerful drilling rigs capable of handling large construction projects.
Depending on the tasks set, drilling rigs can be equipped with various rotor feeding systems, such as a hydraulic cylinder and a Pull-Down winch. ...
Depending on the tasks set, drilling rigs can be equipped with various rotor feeding systems, such as a hydraulic cylinder and a Pull-Down winch. ...
#30310
Drilling rigs Enteco E 6000
The E6000 series includes drilling rigs with an operational weight of 40 to 70 tons with a traditional mast connection via a pantograph. Depending on the customer's needs, it is possible to install both a hydraulic cylinder and a Pull-Down winch to move the rotor.
All models of the E6000 series are equipped with a reinforced frame, which allows the installation of rear hydraulic supports (outriggers) to increase the force generated during tool immersion, which in turn is very important when working with technologies such as well rolling and drilling piles in the casing. ...
All models of the E6000 series are equipped with a reinforced frame, which allows the installation of rear hydraulic supports (outriggers) to increase the force generated during tool immersion, which in turn is very important when working with technologies such as well rolling and drilling piles in the casing. ...
#30308
XCMG HB37V Concrete Pumps
The XCMG HB37V concrete pump is a specialized construction equipment that ensures the efficient supply of concrete mix from the concrete mixer truck to the installation site. It is a pumping unit mounted on a cargo chassis with a concrete distribution boom. The concrete pump is widely used on a wide variety of construction sites due to its convenience and efficiency. The maximum feed height of this model is 36.3m, with a capacity of 120/170 m3/h. The use of a concrete truck pump increases the speed and quality of construction work.
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
#30289
Vibration rammers NORSU RM-80L
The NORSU RM-80L gasoline rammer with Loncin 168-2H engine is a reliable, compact and productive model suitable for compacting crushed stone, sand and soil in confined spaces (for example, in trenches), where it is not possible to use rollers and vibrating plates. It is in demand when laying foundations, laying communications, and is often used when sealing the edges of sidewalks or areas with manhole covers or gutters. The sealing depth of the NORSU RM-80L is 120 mm, and the fuel tank volume is 2.8 liters.
Main Features ...
Main Features ...
#30211
HDD installations XCMG XCMG XZ120E
Technical features of XCMG XZ120E low-tonnage horizontal directional drilling rig
...
...
#29982
XCMG HB37V concrete pump on ISUZU 6x4 chassis
NEW XCMG concrete pump on ISUZU GIGA 6x4 chassis, feed height 37 m.
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
#29844
You might also be interested in other listings:
遮阳篷或窗帘五十铃前进，莫斯科
The JAC N90 is one of the most modern representatives of the line of medium–tonnage commercial trucks. The total weight of the car is 9,030 kg, it is very maneuverable and can carry goods over short, medium and long distances. The model has been specially adapted for Russian working conditions.
The JAC N90 is equipped with a modern cabin with an ergonomic interior, designed for three people. ...
The JAC N90 is equipped with a modern cabin with an ergonomic interior, designed for three people. ...
#18161
遮阳篷或窗帘五十铃前进，莫斯科
Dump truck on a JAC N120 truck from the GEF Automobile Plant (chaika-service).
The car is equipped with a dump truck body, "scoop" configuration, tilt angle up to 50 degrees, capacity up to 10 m3. ...
The car is equipped with a dump truck body, "scoop" configuration, tilt angle up to 50 degrees, capacity up to 10 m3. ...
#18162
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access