Those. permissible total weight per coupling device, kg
14,500
Technical units. permissible total weight per axial unit, kg
20,000
Technical units. permissible total weight of the semi-trailer, kg
34500
Own weight of the semi-trailer, kg
8400
Technically permissible load capacity of a semi-trailer, kg
26000
Payload, kg
26100
Wheelbase, mm
3925
Center-to-center distance, mm
1370
The distance between the springs, mm
900
Inner wheel track, mm
1440
Track of external wheels, mm
2160
Overall length mm
8215
Overall width max, mm
2500
Overall height max, mm
3195
Internal height of the sides, mm
1050
The internal volume of the semi-trailer body, m3
18,42
Height of the platform in the center of the axis in the unloaded state, mm
1960
Height of the platform in the center of the axis when loaded, mm
1915
Front overhang, mm
1718
Radius of the front overhang, mm
2040
Rear turning radius, mm
2300
Height of the frame above the coupling device, mm
282
The height of the coupling device of a horizontally standing unloaded semi-trailer max, mm
1370

Pneumatic brakes
MAZ-950600-010
MAZ-950600-020
The service brake system is pneumatic, two-wire without ABS. The parking brake system operates through the spring-loaded energy accumulators of the first and second axles.
The service brake system is pneumatic, two-wire, equipped with ABS. The parking brake system operates through the spring-loaded energy accumulators of the first and second axles.
Two-axle dump truck semi-trailer
The semi-trailer frame is welded from stamped profiles, the spars are of I-beam cross section, variable in height and interconnected by crossbars. The rear protection and side protection are attached to the frame (they are installed when delivered to countries where the installation of protective devices is mandatory). The coupling pin is of class H50 in accordance with the requirements of UNECE Regulation No. 55 and is designed for operation with a tractor unit having a class G50 coupling device in accordance with the requirements of UNECE Regulation No. 55.
Pendant
Tubular axes with a drum brake mechanism. Suspension spring-balancing "MAZ".
ABS Electrical Equipment
ABS (2S/2M) with rollover resistance system. RSS with the (ABS/ALB) function. The diagnostic connector for checking ABS and EBS is located outside. The pneumatic coupling device (heads) are located in front of the frame on the bracket. Sockets for connecting electrical equipment of semi-trailers according to ISO 1728 and an outlet for connecting ABS and EBS according to ISO 7638 are located on this bracket. BPO "Screen" it is possible to install Wabco equipment.
Tires CIS 12.00R20 HC 16. Fastening with standard bolts and nuts, hole diameter 26 mm. Gable mounting of both axles.
Body and chassis
Sliding support device of the OZAA company with a mechanical drive, permissible load of 24 tons, control on one side, on the right in the direction of movement. 2 pairs of plastic half wings on the first and second axles. 2 anti-rollback stops with holders. Side protection according to UNECE Regulation No. 73.Installation of the spare wheel on the front wall of the platform. At the request of the consumer. Steel protection against rear entry according to UNECE Regulation No. 58.
Installing the platform
The body is all-metal, welded with a flat floor, with unloading backwards through an automatically opening tailgate with an upper hinge type. The side lock is a mechanical type of automatic action. The body volume is 18.42 m3 for transportation of various bulk cargoes.Installation of the restrictive frame. To prevent the body from tipping over.
Installing the hydraulic cylinder. The tilting mechanism is hydraulic, integrated into the general hydraulic system, provides lifting of the body and limiting the angle of lift to 50 °, lowering the body and stopping it in any intermediate position. The hydraulic cylinder of the tipping mechanism of the semi-trailer is telescopic, installed in the front of the semi-trailer and is controlled remotely from the tractor cab during unloading. The hydraulic cylinder of the company "MAZ".
Installing the switch. An autonomous switch that prevents the body from tipping over and responds to certain angles of lifting and lowering the body. The lifting angle of the body is 50 °.
Electrical equipment
Electrical equipment with a rated voltage of 24 V is made according to a two-wire circuit. Electrical equipment includes lighting, light-signalling and switching devices that ensure the operation of the semi-trailer and its components. 2 units of rear marker lights, 2 units of side marker lights, a junction box, wiring harnesses for connecting electrical equipment. Equipment and accessories of "CIS".

Dump semi-trailers