MAZ 856100-014 (856100-015)
The total weight of the trailer in running order, kg 6000
Weight of the transported cargo, kg 16000
Technically permissible total weight of the trailer, kg 22000
Load on the first axle, kg 11000
Load on the second axle, kg 11000
Center-to-center distance, mm 3700
The distance between the springs, mm 900
Inner wheel track, mm 1440
Outer wheel track, mm 2160
Overall length, mm 7655
Overall width max, mm 2550
Overall height max, mm 2720 (3110)
Inner length, mm 5000
Inner width, mm 2320
Internal height, mm 950
Platform volume, m3 11
Height of the platform in the center of the axis in the unloaded state, mm 1615
Height of the platform in the center of the axis when loaded, mm 1555
Drawbar height of a horizontally standing unloaded trailer, mm 900

The trailer frame is a welded structure made of I-section spars interconnected by crossbars.

The frame of the rotary trolley is welded. Suspension brackets are attached to the frame spars. Drawbar brackets are attached to the front crossbar of the frame.

Suspension of a tubular axle with a drum brake mechanism (420x160 wheel brakes). The suspension is a spring-loaded "MAZ", the axles of the trailer wheels provide for the installation of double-pitched disc wheels.

Pneumatic brakes

The service brake system is pneumatic, two-wire equipped with ABS, consists of connecting heads, main filters, an air distributor, receivers with condensate drain valves, control outlet valves, brake force regulator, brake chambers and modulators. The mechanical parking brake system acts through a cable on the service brake pads of the rear axle.

ABS electrical equipment. ABS (4S/3M). The pneumatic coupling device is located in front of the frame on a bracket and is connected to the tractor's power supply system via a cable with an ISO 7638 connector. ABS sensors are installed on the first and second axes. ABS manufactured by BPO Ekran, acceptable installation is "Wabco".

Tires with a dimension of 12.00R20, wide-profile, tubeless tire. Disc wheels, mounting with standard bolts and nuts, hole diameter 26 mm. CIS tires.

Chassis Stopper installation. The locking device of a semi-automatic slewing trolley is designed to lock the trolley when the trailer is moving in reverse. Installing the turning circle. Installing the drawbar. The drawbar is a rigid, triangular-shaped welded structure consisting of pipes interconnected by crossbars. The drawbar is pivotally connected to the frame of the slewing trolley by means of axles. Gas-free coupling Ø50. Bumper mounting. Installing a side fence.Installation of anti-rollback stops. Installation of rear mudguards. Installing the front mudguards. Installation of hydraulic equipment. The body is lifted at an angle of 50 degrees.

Installing a spare wheel for MAZ 856100-015.

Platform installation The platform consists of two suspended sides (side), the sides are locked in the lower part of the front side with special locks. Unloading is lateral, on both sides. The volume of the platform is 11 m3. The side and rear sides are equipped with binding hooks from the outside.

Awning Installation of an awning (at the request of the consumer). The tent fabric is imported.

Electrical equipment with a rated voltage of 24 V is made according to a two-wire circuit. Electrical equipment includes: — taillights that perform the functions of parking lights, turn signals, brake lights, contour lights, rear fog lights, taillights; — front lights with reflective devices; — side marker lights with reflective devices; — full—size lights; — license plate lights; — two seven-terminal forks; - red triangular rear retroreflectors; — wiring harnesses for connecting electrical equipment products. The light source is incandescent lamps A24-5-2, A24-3-1, A24-10, A24-21-3.

CATEGORIES: Trailers
Share it
0 0

Dump semi-trailers